MELF High Voltage Resistor (CSRH Series)
0207 / 0309
MELF High Voltage Resistor - CSRH Series Files Download
The MELF, Leadless face resistor. Land pattern sizes are the same as SMD chip resistors. High quality of MELF resistors offer excellent electrical and Environmental Stability, exceptional stability demonstrated over life, biased humidity, and short time overload testing.
High voltage applications for power capacitor, motor start-up protection,
car & motorcycle engine ignition, etc. other surge energy request able
to design for engineer design request
- For SMD enabled structure.
- It is epoxy resin coating material.
- Lowest TCR control to 25ppm, normal type is 5% 200ppm, 1% 100ppm, 0.5% 50ppm.
- High voltage applications for power capacitor, motor start-up protection, car & motorcycle engine ignition, etc. other surge energy request able to design for engineer design request.
|Dielectric Voltage for AC Source||200V||250V|
|Short Time Overload Test||±1% within|
TCR can design is depending on client request, from ±25ppm and over.
Standard Electrical Specifications
|Surge Voltage For|
|0207||1/2W||-55 ~ +155°C||1000V||1500V||1500V Max||1KΩ - 100MΩ||±100|
|0309||1W||-55 ~ +155°C||2500V||2500V||2500V Max||1KΩ - 100MΩ||±100|
This test condition is follow UL 1676 and EN 60065 is pulse wave and test circuit, but the high voltage test is follow standard electrical specification.
- Files Download
- RoHS Report
- About Viking
- RF Ceramic Inductor
- Ferrite Chip Inductor
- Miniature Power Inductor
- Power Choke Power Inductor
- SMD Metal Alloy Power Inductor
- Shielding Power Inductor
- Non-Shielding Power Inductor
- Wire Wound Power Inductor
- DIP Power Inductor
- EMI Bead (CBM Series)
- Common Mode Filter (CM Series)
- Automotive Grade Inductor
MELF High Voltage Resistor (CSRH Series) Manufacturer - Viking
Based in Taiwan, Viking Tech Corporation is one of the prime MELF High Voltage Resistor (CSRH Series) manufacturers since 1997. And their products are used throughout automotive, electronic device applications.
TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.
Viking has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 20 years of experience, Viking makes sure to meet each customer's demands.