MELF Metal Film Precision Resistor (CSRV Series AECQ-200)

MELF Metal Film Precision Resistor (CSRV Series AECQ-200)

0102 / 0204 / 0207

MELF Metal Film Precision Resistor - CSRV Series AECQ-200
MELF Metal Film Precision Resistor - CSRV Series AECQ-200 Files Download
Derating Curve
Derating Curve

Automotive grade MELF resistor with AEC-Q200 qualified to meet automotive industrial standard. Advanced level for very critical environment.

Features

  • AEC-Q200 Compliance.
  • Thin film technology.
  • Excellent overall stability.
  • Sn termination on Ni barrier layer.
  • Tight tolerance down to ± 0.1%.
  • Extremely low TCR down to ± 10 PPM/°C.
  • High power rating up to 1 Watts.
  • SMD enabled structure.
  • Lead-free and RoHS compliant.

Applications

  • Automotive.
  • Industrial.
  • Telecommunication.
  • Medical Equipment.
  • Measurement / Testing Equipment.

Construction

Thick Film Low TC Current Sensing Resistor - CS Series Construction

Technical Specifications

DESCRIPTIONCSRV0102CSRV0204CSRV0207
Resistance range8.2Ω - 1MΩ; 0Ω0.1Ω - 3.4MΩ; 0Ω0.1Ω - 3.4MΩ; 0Ω
Resistance tolerance± 5%;± 1%;± 0.5%;± 0.25%;± 0.1%
Temperature coefficient± 100ppm/°C; ± 50ppm/°C;
± 25ppm/°C; ± 15ppm/°C
± 100ppm/°C; ± 50ppm/°C; ± 25ppm/°C;
± 15ppm/°C; ± 10ppm/°C
Operation modeStandardHigh powerStandardHigh powerStandardHigh power
Power rating P701/8W1/5W0.3W1/4W2/5W1/2W1W
Operating voltage Umax.150V200V200V200V200V300V350V
Operating temperature range-55°C ~ 155°C
Max. resistance change at P70 for resistance range, ΔR/R max., after 1000 h≦ 0.5%≦ 0.5%≦ 0.5%

Part Numbering

MELF Metal Film Precision Resistor - CSRV Series Part Numbering

Standard Electrical Specifications

Item
Type
Power Rating at 70°COperating Temp. RangeMax. Operating VoltageMax. Overload VoltageResistance RangeTCR (PPM/°C)
± 0.1%± 0.25%± 0.5%± 1%± 5%
01021/8W-55 ~ +155°C150V300V100Ω - 56KΩ-± 15
100Ω - 82KΩ49.9Ω- 200KΩ49.9Ω - 390KΩ-± 25
-8.2Ω - 1MΩ± 50
-40Ω - 1MΩ± 100
Jumper:2A0Ω (<15mΩ)-
02041/4W-55 ~ +155°C200V400V49.9Ω - 20KΩ± 10
10Ω - 300KΩ± 15
10Ω - 1MΩ10Ω - 3.4MΩ4.02Ω - 3.4MΩ± 25
10Ω - 1MΩ1Ω - 1MΩ1Ω - 3.4MΩ0.2Ω - 3.4MΩ± 50
-0.1Ω-1MΩ± 100
Jumper:2A0Ω (<15mΩ)-
02071/2W-55 ~ +155°C300V600V49.9Ω - 20KΩ± 10
10Ω - 300KΩ± 15
10Ω - 1MΩ10Ω - 3.4MΩ4.02Ω - 3.4MΩ± 25
10Ω - 1MΩ1Ω - 1MΩ1Ω - 3.4MΩ0.2Ω - 3.4MΩ± 50
-0.1Ω - 1MΩ± 100
Jumper:4A0Ω (<15mΩ)-

Pulse Withstanding Capacity

The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.

Continuous Pulse

The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value.

Frequency behavior

Resistors are designed to function according to ohmic laws. This is basically true of resistors for frequencies up to 100kHz. At higher frequencies, there is an additional contribution to the impedance by an ideal resistor switched in series with a coil and both switched parallel to a capacitor. The values of the capacitance and inductance are mainly determined by the dimensions of the terminations and the conductive path length.
The environment surrounding components has a large influence on the behavior of the component on the printed-circuit board.

Lightning Surge

Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value.

Files Download

RoHS Report


SEARCH

Condition search:      Cross Search

Best Sale

MELF Metal Film Precision Resistor (CSRV Series AECQ-200) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime MELF Metal Film Precision Resistor (CSRV Series AECQ-200) manufacturers since 1997. And their products are used throughout automotive, electronic device applications.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Viking has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 20 years of experience, Viking makes sure to meet each customer's demands.


Hot Products

Resistor

Resistor

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
Inductor

Inductor

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
Capacitor

Capacitor

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More