
AUTOMOTIVE APPLICATIONS
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreThin film high voltage-ARHV..A series * 1206,1210 Offer up to 700V-1000V voltage and provide long-term stability with special passivation. * ±25ppm/°TCR and ±0.1% resistance tolerance. * Resistance upto 3MΩGreatly reduce the number of thin film resistor for high Voltage Greatly reduce SMD costs , Saving PCB space or increase PCB integration density Higher application reliability by reducing the number of solder joints
Read MoreARF series chip resistors are designed with low internal reactance. The thin film technology applied to resistors is appropriated to reduce the parasitic inductance and capacitance. Low internal reactance allows these devices to keep a very good resistor behavior in high frequencies.Applications
Read MoreThe resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.
Read MoreMetal alloy 0 ohm jumper resistor for ultra low resistance under 0.5mohm for sizes of 0402~0805, under 0.2mohm for sizes of 1206,2010 withstand high temperature for high current applications. Our LRJ seires is true metal alloy plate zero ohm resistor , a good choice of less space and low cost than DIP jumper headers. This Metal jumper is designed to extremely low impedance and profile circuit linkage as a zero ohm resistor.
Read MoreCRP series thick film resistor is designed on high thermal conductivity aluminum nitride substrate with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users’ circuit assembly. It offers effiectively heat dissipation to remove the heat to the overall performance of the devices. Enhance over 3 times more power in same size , Excellent reliability and stability. It offers High Thermal Conductivity for Power to 22 W with temperature control in 2512 Case ..
Read MoreCSRF series is a MELF resistor specially designed for high frequency applications. The general type MELF resistor uses a spiral trimming method to increase the internal inductance, CSRF uses a special non-spiral trimmed method reduced the internal reactance which caused the impedance change when the resistor used in high frequency applications, so it is very suitable for high frequency circuit design.
Read MoreThe resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.
Read MoreAnti-Surfur resistor is using high sulfuration-proof inner electrode material and special construction of termination to increase the strength to against the sulfuration. Sulfuration occurs in the resistor with silver for inner electrode. Sulfurated environment is included as sulfur gas near hot spring or volcanos or produced through firing of raw oil, even outdoor equipment under air pollution could be affected. Silver sulfide produced through this reaction impacts the conductivity therefore resistor gets disconnected.Viking ‘s Anti-sulfurated resistors are an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.Product applications:automotive electronic components, power supplies, industrial equipment, petrochemical industry electronic equipment, network servers, sulfur detectors, telecom stations, sewage treatment facilities, etc.
Read MoreChip Resistor Array (R Network) is single packaged device containing an array of homogeneous resistor elements. Resistor array is typically used for convenience and cost or space saving when several same resistors applied in a layout. The size can be as small as 0201,4P2R or 8P4R. AS43,AS42,AS41,AS21 Resistor Arry is using special construction of termination to increase the strength to against the sulfuration. Silver sulfide produced due to high Sulfur environment that impacts the conductivity, therefore resistor gets disconnected. Viking ‘s Anti-sulfurated resistor array is an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.
Read MoreARN Series Chip resistors are designed on high thermal conductivity Aluminum Nitride substrate with enlarged backside terminations to reduce the thermal resistance. As with any high power chip resistor has good ability to remove the heat to the overall performance of the devices. Aluminum Nitride Precision Thin Film Chip Resistor-ARN Series ● High thermal conductivity aluminum nitride substrate ● High-power resistors 1206 up to 2 watts, 2512 6W soon is coming ● Offer 2x the power rating over traditional thin-film chip resistors ● Designed with enlarged backside terminations to reduce the thermal resistance ● Low TC down to 25 ppm/C ,Tight tolerance to 0.1% Please consult with us for the new product.
Read MoreMetal Foil is special designed for 4 terminations, Kelvin design , surface-mount ,High power and Tight Tolerance of 0.5% for critical current sensing design. This resistor covers the most widely used resistance range from 10m~20m. This technology offers an excellent Temperature Coefficient of Resistance (TCR) and high reliable, accurate current detection. Four Terminal High Precision Current Sense Resistors-4T Series
Read MoreThin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreCeramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read MoreMultilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More