Wire Wound Type Power Inductor

Wire Wound Type Power Inductor / Viking Tech has the experience in the design of innovative components, offering support and service to Global customers that demand a genuine manufacturing partner. Our goal is to be the leader in design, manufacturing, and marketing of miniature, precision passive components used throughout Automotive, Industrial and 3C electronic applications.

Wire Wound Type Power Inductor

MLP04MTR33

Wire Wound Type Power Inductor
Wire Wound Type Power Inductor Files Download

Wirewound ferrite chip high power inductor , small sizes , closed magnetic circuit avoids crosstalk , suitable for high density installation and re-flow soldering. Used in all kind electronic devices, computing, converters.
MLP Series1004 ±20% 0.33μH 0.026 Ω 6A 4A

SizeToleranceInductanceTest ConditionDCR (Ω) max.I sat (A) max.I rms (A) max.
1004±20%0.331MHz, 1mA0.02664

High Current Electrical Specifications

MLPH06 (0806) Wire Wound Type Power Inductor

Codes Inductance (uH) Tolerance Test Condition DCR (mΩ) max. Isat (A) max. Irms (A) max.
R47 0.47 ± 20% 1MHz, 1V 30 5.30 4.05
1R0 1.0 ± 20% 1MHz, 1V 60 3.30 3.00
1R5 1.5 ± 20% 1MHz, 1V 99 3.10 2.20
2R2 2.2 ± 20% 1MHz, 1V 140 2.45 2.00

MLPH04 (1004) Wire Wound Type Power Inductor

R47 0.47 ± 20% 1MHz, 1V 29 6.00 4.40
1R0 1.0 ± 20% 1MHz, 1V 52 4.00 3.10
2R2 2.2 ± 20% 1MHz, 1V 110 3.00 2.10

MLPH08 (1008) Wire Wound Type Power Inductor

Codes Inductance (uH) Tolerance Test Condition DCR (mΩ) max. Isat (A) max. Irms (A) max.
R47 0.47 ± 20% 1MHz, 1V 22 6.20 4.90
1R0 1.0 ± 20% 1MHz, 1V 44 4.30 3.30
2R2 2.2 ± 20% 1MHz, 1V 89 3.20 2.20

Operating Temperature range: -40°C to +125°C

Environmental Characteristics

Electrical Performance Test

Item Requirement Test Method
Inductance Refer to standard electrical characteristic spec. HP4285A
DC Resistance RDC micro-ohm meter.
Isat DC current will cause a 30% inductance reduction form initial value.
Irms DC current will cause coil temp. rising to 40℃ whichever is smaller.

Mechanical Performance Test

Item Requirement Test Method
Resistance to Soldering Heat Appearance: No damage
More than 95% of the terminal.
Electrode should be covered with solder.
Inductance: within ± 20% of initial value
Flux: Rosin
Solder Temperature: 260 ± 5°C
Immersion Time: 10 ± 1 sec.
Adhesive Test No mechanical damage
Soldering the products on PCB after the pulling test force>5N
Reflow temperature: 245°C it shall be soldered on the substrate applying direction parallel to the substrate
Apply force(F): 5 N
Test time: 10 sec
Temperature Cycle No mechanical damage
Inductance: within ± 20% of initial value
Temperature: -50 ~ 125°C for 30 minutes each
Cycle: 500cycles
Measurement: at ambient temperature 24 hours after test completion
Dry Heat Test Temperature: 85 ± 2°C
Testing time: 500 hrs
Applied current: full rated current
Measurement: at ambient temperature 24 hours after test completion
Humidity Test Temperature: 60 ± 2°C, Humidity: 90 ~ 95% RH
Testing time: 500 hrs
Applied current: full rated current
Measurement: at ambient temperature 24 hours after test completion

☑Storage Temperature: 5~40°C ; Humidity:<65%RH

Reflow

Recommendable Reflow Soldering

Recommendable Reflow Soldering

Packaging

Reel Specifications (Unit: mm)

Type A B C W T Quantity (EA) Reel Specifications - MLP
MLP03 178 ± 1 60.0 + 0.5 13.0 ± 0.2 9.00 ± 0.5 12.0 ± 0.15 3,000
MLP05 178 ± 1 60.0 + 0.5 13.0 ± 0.2 9.00 ± 0.5 12.0 ± 0.15 3,000
MLP(H)06 178 ± 1 60.0 + 0.5 13.0 ± 0.2 9.00 ± 0.5 12.0 ± 0.15 3,000
MLP(H)04 178 ± 1 60.0 + 0.5 13.0 ± 0.2 9.00 ± 0.5 12.0 ± 0.15 3,000
MLP(H)08 178 ± 1 60.0 + 0.5 13.0 ± 0.2 9.00 ± 0.5 12.0 ± 0.15 3,000
MLP10 178 ± 1 60.0 + 0.5 13.0 ± 0.2 9.00 ± 0.5 12.0 ± 0.15 3,000

Tape Specifications (Unit: mm)

Type A0 B0 K0 t Tape Specifications - MLP
MLP03 1.45 ± 0.10 2.20 ± 0.10 1.12 ± 0.10 0.22 ± 0.05
MLP05 1.45 ± 0.10 2.20 ± 0.10 1.12 ± 0.10 0.22 ± 0.05
MLP06 1.80 ± 0.10 2.20 ± 0.10 1.15 ± 0.10 0.22 ± 0.05
MLPH06 1.82 ± 0.05 2.23 ± 0.05 1.15 ± 0.05 0.22 ± 0.05
MLP04 2.50 ± 0.10 3.00 ± 0.10 1.60 ± 0.10 0.25 ± 0.05
MLPH04 2.25 ± 0.05 2.80 ± 0.10 1.35 ± 0.10 0.22 ± 0.05
MLP08 2.50 ± 0.10 3.00 ± 0.10 1.60 ± 0.10 0.25 ± 0.05
MLPH08 2.25 ± 0.05 2.80 ± 0.10 1.35 ± 0.10 0.22 ± 0.05
MLP10 2.80 ± 0.10 3.45 ± 0.10 1.34 ± 0.10 0.23 ± 0.05

Code

  • R33
Files Download


SEARCH

Condition search:      Cross Search

Menu

Best Sale

Wire Wound Type Power Inductor Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime Wire Wound Type Power Inductor manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Wire Wound Type Power Inductor has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

Wire Wound Type Power Inductor has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.


Main Product

AUTOMOTIVE APPLICATIONS

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
MEDICAL APPLICATIONS

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
COMMUNICATION APPLICATIONS

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More