AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K)

AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K) / Viking Tech has the experience in the design of innovative components, offering support and service to Global customers that demand a genuine manufacturing partner. Our goal is to be the leader in design, manufacturing, and marketing of miniature, precision passive components used throughout Automotive, Industrial and 3C electronic applications.

AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K)

CRW25JC4--430K

AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K)
AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K) Files Download

Automotive Grade Chip Resistor (Wide Terminal) - CRW..A Series
CRW..A Series1225 ±5% 100 3W Series430KΩ 4K/REEP

SizeToleranceTCR (ppm /℃)PowerResistance (Ohm)Package
1225±5%1003W430K4K/REEP

Environmental Characteristics

Item Requirement Test Method
1% and Below 5% Jumper
Temperature Coefficient of Resistance (T.C.R.) As Spec. JIS C 5201-1 4.8
IEC 60115-1 4.8
At 25°C/-55°C and 25°C/ + 125°C, 25°C is the reference temperature
Short Time Overload ± (1.0% + 0.05Ω) ± (2.0% + 0.05Ω) <50mΩ JIS C 5201-1 4.13
IEC 60115-1 4.13
2.5 times RCWV or Max. Overload Voltage whichever is lower for 5 seconds
Insulation Resistance ≧10G JIS C 5201-1 4.6
IEC 60115-1 4.6
Max. Overload Voltage for 1 minute
Operational Life ± (2.0% + 0.10Ω) ± (3.0% + 0.10Ω) <100mΩ MIL-STD-202 Method 108
Condition D Steady State TA=125°C at derated power.
Measurement at 24±4 hours after test conclusion.
Biased Humidity ± (2.0% + 0.10Ω) ± (3.0% + 0.10Ω) <100mΩ MIL-STD-202 Method 103
1000 hrs 85°C/85%RH 10% of operating power.
High Temperature Exposure ± (1.0% + 0.05Ω) ± (1.5% + 0.10Ω) <50mΩ MIL-STD-202 Method 108
at + 155°C for 1000 hrs
Board Flex ± (1.0% + 0.05Ω) ± (1.0% + 0.05Ω) <50mΩ AEC-Q200-005
Bending once for 60 seconds
2010, 2512 sizes: 2mm Other sizes: 3mm
Solderability >95% coverage JIS C 5201-1 4.17
IEC 60115-1 4.17
J-STD-002
245± 5°C for 3 seconds
Resistance to Soldering Heat ± (0.5% + 0.05Ω) ± (1.0% + 0.05Ω) <50mΩ MIL-STD-202 Method 210
260± 5°C for 10 seconds
Voltage Proof No breakdown or flashover JIS C 5201-1 4.7
IEC 60115-1 4.7
1.42 times Max. Operating Voltage for 1 minute
Leaching Individual leaching area ≦5%
Total leaching area ≦10%
JIS C 5201-1 4.18
IEC 60068-2-58 8.2.1
260± 5°C for 30 seconds
Temperature Cycling ± (0.5% + 0.05Ω) ± (1.5% + 0.05Ω) <50mΩ JESD22 Method JA-104
-55°C to + 125°C, 1000 cycles
Mechanical Shock ± (0.25% + 0.05Ω) ± (1.0% + 0.05Ω) <50mΩ MIL-STD-202 Method 213
Wave Form: Tolerance for half sine shock pulse.
Peak value is 100g's. Normal duration (D) is 6.
Vibration ± (0.5% + 0.05Ω) ± (1.0% + 0.05Ω) <50mΩ MIL-STD-202 Method 204
5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz
ESD ± (3% + 0.05Ω) AEC-Q200-002
Human body model
0201: 0.5KV
0402/0603: 1KV
0805 and above: 2KV
Resistance to Solvents No visible damage on appearance and marking. MIL-STD-202 Method 215
Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents.
Terminal Strength No broken AEC-Q200-006
Force of 1.8kg for 60 seconds.
Flammability No ignition of the tissue paper or scorching or the pinewood board UL-94
V-0 or V-1 are acceptable. Electrical test not required.
Sulfur Test △R± 0.5% <50mΩ EIA-977
105± 2°C, no power rating for 750 hrs.

RCWV (Rated Continuous Working Voltage) = √(P x R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH

Soldering Condition

Soldering Condition (IPC/JEDEC J-STD-020)

Marking

No Marking for 0201/ 0402
Jumper for all: Letter "0"
1% for 0805 / 1206 / 1210 / 2010 / 2512: 4 digits marking

Example:

Resistance 100Ω 2.2KΩ 10KΩ 49.9KΩ 100KΩ
Marking 1000 2201 1002 4992 1003

5% for 0603 / 0805 / 1206 / 1210 / 2010 / 2512: 3 digits marking in E24
Example: 101=100Ω  102=1KΩ (1st and 2nd are E24 code and 3rd code is multiplier)


E24 code 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91
1% for 0603: 3 digits marking in E96
1% for  0603: 3 digits marking in E96

Marking Table

Code E96 Code E96 Code E96 Code E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48 309 72 549 96 976
Code A B C D E F G X Y    
Multiplier 100 101 102 103 104 105 106 10-1 10-2    

Packaging

Reel Specifications & Packaging Quantity

Reel Specifications & Packaging Quantity
Type Packaging Quantity Tape Width Reel Diameter ΦA
(mm)
ΦB
(mm)
ΦC
(mm)
W
(mm)
T
(mm)
AS01
AS02
Paper 10K 8mm 7 inch 178.5 ± 1.5 60 + 1/-0 13.0 ± 0.2 9.0 ± 0.5 12.5 ± 0.5
AS03
AS05
AS06
AS10
Paper 5K 8mm 7 inch 178.5 ± 1.5 60 + 1/-0 13.0 ± 0.2 9.0 ± 0.5 12.5 ± 0.5
AS0A
AS12
Embossed 4K 12mm 7 inch 178.5 ± 1.5 60 + 1/-0 13.0 ± 0.5 13.0 ± 0.5 15.5 ± 0.5

Paper Tape Specifications

Paper Tape Specifications
Type A
(mm)
B
(mm)
W
(mm)
E
(mm)
F
(mm)
P0
(mm)
P1
(mm)
P2
(mm)
ΦD0
(mm)
T
(mm)
AS01 0.38 ± 0.05 0.68 ± 0.05 8.0 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 1.50 + 0.1,-0 0.42 ± 0.20
AS02 0.65 ± 0.10 1.15 ± 0.10 8.0 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 1.50 + 0.1,-0 0.45 ± 0.10
AS03 1.10 ± 0.10 1.90 ± 0.10 8.0 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.1,-0 0.70 ± 0.10
AS05 1.60 ± 0.10 2.40 ± 0.20 8.0 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.1,-0 0.85 ± 0.10
AS06 1.90 ± 0.10 3.50 ± 0.20 8.0 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.1,-0 0.85 ± 0.10
AS10 2.90 ± 0.10 3.50 ± 0.20 8.0 ± 0.20 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.05 2.00 ± 0.05 1.50 + 0.1,-0 0.85 ± 0.10

Embossed Plastic Tape Specifications

Embossed Plastic Tape Specifications
Type A
(mm)
B
(mm)
W
(mm)
E
(mm)
F
(mm)
P0
(mm)
P1
(mm)
P2
(mm)
ΦD0
(mm)
T
(mm)
AS0A 2.8 ± 0.10 5.5 ± 0.10 12.0 ± 0.30 1.75 ± 0.10 5.5 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.50 + 0.1, -0 1.2+0
AS12 3.5 ± 0.10 6.7 ± 0.10 12.0 ± 0.30 1.75 ± 0.10 5.5 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.50 + 0.1, -0 1.2+0

Code

  • 430K
Files Download
  • Data Sheet
    Data Sheet

    Automotive Grade Chip Resistor (Wide Terminal) - CRW..A Series




SEARCH

Condition search:      Cross Search

Menu

Best Sale

AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K) manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

AUTOMOTIVE GRADE CHIP RESISTOR (WIDE TERMINAL) (CRW..A Series CRW25JC4--430K) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.


Main Product

AUTOMOTIVE APPLICATIONS

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
MEDICAL APPLICATIONS

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
COMMUNICATION APPLICATIONS

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More