APPLICATIONS AUTOMOBILES
Résistance de précision en film mince 0,01 %, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteInducteur en céramique à enroulement de fil, haute fréquence, inducteur RF pour haute SRF, excellent Q, stabilité de température supérieure. Inductance stable dans un circuit haute fréquence. Conception hautement stable pour des besoins critiques.
WL Series1008 ±5% 390nHμH 1.12 Ω 630mA 45 / 100MHz 0.5GHz
Taille | Tolérance | Inductance | Condition de test | DCR (Ω) max. | IDC (mA) | Q | SRF |
---|---|---|---|---|---|---|---|
1008 | ±5% | 390nH | 25MHz | 1.12 | 630 | 45 / 100MHz | 0.5GHz |
WL03(H) Wire Wound Chip Inductors / High Current Type
Inductance (nH) | Tolerance | L Freq. (MHz) | Quality Factor min. | SRF (GHz) min. | DCR (Ω) max. | IDC (mA) max. |
---|---|---|---|---|---|---|
1.6 | ± 5, ± 10% | 250 | 24 | 12.50 | 0.030 | 2400 |
3.6 | ± 5, ± 10% | 250 | 24 | 5.90 | 0.048 | 2300 |
3.9 | ± 5, ± 10% | 250 | 25 | 5.90 | 0.054 | 2200 |
6.8 | ± 5, ± 10% | 250 | 35 | 5.80 | 0.054 | 2100 |
7.5 | ± 5, ± 10% | 250 | 38 | 3.70 | 0.059 | 2100 |
8.2 | ± 5, ± 10% | 250 | 38 | 3.70 | 0.060 | 2000 |
10 | ± 2, ± 5, ± 10% | 250 | 38 | 3.70 | 0.071 | 2000 |
12 | ± 2, ± 5, ± 10% | 250 | 38 | 3.00 | 0.075 | 2000 |
15 | ± 2, ± 5, ± 10% | 250 | 38 | 2.80 | 0.080 | 1900 |
18 | ± 2, ± 5, ± 10% | 250 | 40 | 2.80 | 0.099 | 1900 |
22 | ± 2, ± 5, ± 10% | 250 | 42 | 2.40 | 0.099 | 1800 |
24 | ± 2, ± 5, ± 10% | 250 | 42 | 2.40 | 0.105 | 1800 |
WL02(H) Wire Wound Chip Inductors / High Q Type
Inductance (nH) | Tolerance | L Freq. (MHz) | Quality Factor | SRF (GHz) min. | DCR (Ω) max. | IDC (mA) max. | |
---|---|---|---|---|---|---|---|
900MHz | 1.7GHz | ||||||
1.0 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 46 | 75 | 16.0 | 0.030 | 2300 |
2.0 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 58 | 85 | 15.2 | 0.038 | 2100 |
2.2 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 60 | 86 | 15.1 | 0.038 | 2100 |
2.4 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 60 | 83 | 14.0 | 0.042 | 2000 |
2.7 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 62 | 85 | 13.0 | 0.075 | 1500 |
3.3 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 66 | 95 | 12.8 | 0.045 | 1700 |
3.6 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 65 | 94 | 11.7 | 0.045 | 1700 |
3.9 | ± 0.2nH, ± 0.5nH, ± 5%, ± 10% |
250 | 64 | 98 | 9.50 | 0.045 | 1700 |
4.3 | ± 0.5nH, ± 5%, ± 10% | 250 | 63 | 90 | 7.15 | 0.050 | 1600 |
4.7 | ± 0.5nH, ± 5%, ± 10% | 250 | 58 | 83 | 6.85 | 0.070 | 1500 |
5.1 | ± 2%, ± 5%, ± 10% | 250 | 54 | 76 | 6.80 | 0.115 | 1200 |
5.6 | ± 2%, ± 5%, ± 10% | 250 | 73 | 105 | 6.50 | 0.050 | 1600 |
6.2 | ± 2%, ± 5%, ± 10% | 250 | 73 | 100 | 5.80 | 0.055 | 1600 |
6.8 | ± 2%, ± 5%, ± 10% | 250 | 68 | 94 | 5.80 | 0.065 | 1500 |
7.5 | ± 2%, ± 5%, ± 10% | 250 | 60 | 82 | 5.40 | 0.090 | 1400 |
8.2 | ± 2%, ± 5%, ± 10% | 250 | 68 | 95 | 5.40 | 0.065 | 1500 |
8.7 | ± 2%, ± 5%, ± 10% | 250 | 68 | 95 | 5.00 | 0.065 | 1500 |
9.0 | ± 2%, ± 5%, ± 10% | 250 | 67 | 92 | 5.00 | 0.080 | 1400 |
9.5 | ± 2%, ± 5%, ± 10% | 250 | 64 | 90 | 4.70 | 0.090 | 1400 |
10 | ± 2%, ± 5%, ± 10% | 250 | 62 | 90 | 4.70 | 0.100 | 1300 |
11 | ± 2%, ± 5%, ± 10% | 250 | 68 | 98 | 4.70 | 0.065 | 1400 |
12 | ± 2%, ± 5%, ± 10% | 250 | 66 | 100 | 4.40 | 0.100 | 1200 |
13 | ± 2%, ± 5%, ± 10% | 250 | 62 | 82 | 4.20 | 0.150 | 870 |
15 | ± 2%, ± 5%, ± 10% | 250 | 62 | 85 | 3.90 | 0.110 | 1100 |
16 | ± 2%, ± 5%, ± 10% | 250 | 57 | 77 | 3.70 | 0.140 | 850 |
18 | ± 2%, ± 5%, ± 10% | 250 | 58 | 74 | 3.55 | 0.120 | 900 |
19 | ± 2%, ± 5%, ± 10% | 250 | 61 | 88 | 3.50 | 0.145 | 850 |
20 | ± 2%, ± 5%, ± 10% | 250 | 58 | 76 | 3.50 | 0.185 | 780 |
21 | ± 2%, ± 5%, ± 10% | 250 | 48 | 62 | 1.70 | 0.460 | 450 |
22 | ± 2%, ± 5%, ± 10% | 250 | 60 | 74 | 3.30 | 0.160 | 800 |
23 | ± 2%, ± 5%, ± 10% | 250 | 60 | 77 | 3.30 | 0.160 | 800 |
24 | ± 2%, ± 5%, ± 10% | 250 | 55 | 71 | 3.15 | 0.200 | 700 |
25 | ± 2%, ± 5%, ± 10% | 250 | 57 | 73 | 3.15 | 0.250 | 600 |
26 | ± 2%, ± 5%, ± 10% | 250 | 56 | 74 | 3.15 | 0.285 | 450 |
27 | ± 2%, ± 5%, ± 10% | 250 | 62 | 86 | 3.20 | 0.320 | 450 |
30 | ± 2%, ± 5%, ± 10% | 250 | 61 | 87 | 2.90 | 0.330 | 450 |
33 | ± 2%, ± 5%, ± 10% | 250 | 61 | 80 | 2.80 | 0.330 | 490 |
36 | ± 2%, ± 5%, ± 10% | 250 | 59 | 76 | 2.80 | 0.380 | 480 |
37 | ± 2%, ± 5%, ± 10% | 250 | 57 | 72 | 2.70 | 0.460 | 470 |
39 | ± 2%, ± 5%, ± 10% | 250 | 56 | 84 | 2.60 | 0.430 | 450 |
40 | ± 2%, ± 5%, ± 10% | 250 | 56 | 75 | 2.60 | 0.430 | 450 |
43 | ± 2%, ± 5%, ± 10% | 250 | 52 | 68 | 2.50 | 0.520 | 450 |
47 | ± 2%, ± 5%, ± 10% | 250 | 48 | 62 | 2.40 | 0.580 | 420 |
51 | ± 2%, ± 5%, ± 10% | 250 | 52 | 59 | 2.30 | 0.700 | 360 |
WL03(Q) Wire Wound Chip Inductors / High Q Type
Inductance (nH) | Tolerance | L Freq. (MHz) | Q Typ at 250(MHz) | SRF Typ (GHz) | DCR (Ω) max. | IDC (mA) max. | 900MHz | 1.7GHz | ||
---|---|---|---|---|---|---|---|---|---|---|
L Typ | Q Typ | L Typ | Q Typ | |||||||
1.8 | ± 5, ± 10% | 250 | 23 | 16.0 | 0.033 | 2100 | 1.77 | 40 | 1.77 | 65 |
2.2 | ± 5, ± 10% | 250 | 13 | 15.0 | 0.180 | 900 | 2.14 | 25 | 2.12 | 35 |
3.0 | ± 5, ± 10% | 250 | 35 | 9.50 | 0.024 | 1000 | 2.96 | 65 | 2.97 | 85 |
3.3 | ± 5, ± 10% | 250 | 32 | 9.60 | 0.024 | 1900 | 3.28 | 67 | 3.32 | 104 |
3.6 | ± 2, ± 5, ± 10% | 250 | 40 | 9.70 | 0.031 | 1900 | 3.59 | 70 | 3.62 | 116 |
3.9 | ± 2, ± 5, ± 10% | 250 | 35 | 7.50 | 0.039 | 1600 | 3.88 | 68 | 3.95 | 108 |
4.3 | ± 2, ± 5, ± 10% | 250 | 30 | 7.50 | 0.080 | 1300 | 4.29 | 58 | 4.31 | 91 |
4.7 | ± 2, ± 5, ± 10% | 250 | 26 | 7.90 | 0.100 | 1100 | 4.65 | 48 | 4.71 | 75 |
5.1 | ± 2, ± 5, ± 10% | 250 | 40 | 8.90 | 0.036 | 1700 | 5.08 | 84 | 5.12 | 140 |
5.6 | ± 2, ± 5, ± 10% | 250 | 48 | 6.60 | 0.036 | 1700 | 5.6 | 87 | 5.73 | 456 |
6.0 | ± 2, ± 5, ± 10% | 250 | 49 | 6.00 | 0.036 | 1700 | 5.92 | 94 | 6.12 | 154 |
6.8 | ± 2, ± 5, ± 10% | 250 | 42 | 5.80 | 0.042 | 1400 | 6.83 | 88 | 7.05 | 143 |
7.2 | ± 2, ± 5, ± 10% | 250 | 48 | 5.40 | 0.052 | 1400 | 7.25 | 96 | 7.38 | 139 |
7.5 | ± 2, ± 5, ± 10% | 250 | 41 | 5.30 | 0.080 | 1300 | 7.55 | 81 | 7.85 | 12 |
8.2 | ± 2, ± 5, ± 10% | 250 | 46 | 5.90 | 0.054 | 1400 | 8.21 | 96 | 8.39 | 148 |
8.7 | ± 2, ± 5, ± 10% | 250 | 46 | 5.50 | 0.054 | 1400 | 8.73 | 97 | 9.00 | 149 |
9.1 | ± 2, ± 5, ± 10% | 250 | 40 | 5.10 | 0.037 | 1400 | 9.18 | 76 | 9.64 | 109 |
9.5 | ± 2, ± 5, ± 10% | 250 | 49 | 4.90 | 0.053 | 1400 | 9.56 | 98 | 9.99 | 149 |
10 | ± 2, ± 5, ± 10% | 250 | 49 | 4.30 | 0.048 | 1400 | 10.16 | 90 | 10.64 | 142 |
11 | ± 2, ± 5, ± 10% | 250 | 41 | 4.10 | 0.058 | 1400 | 11.06 | 78 | 11.82 | 108 |
12 | ± 2, ± 5, ± 10% | 250 | 37 | 4.10 | 0.088 | 1100 | 12.26 | 69 | 13.2 | 91 |
15 | ± 2, ± 5, ± 10% | 250 | 48 | 3.60 | 0.078 | 1200 | 15.41 | 83 | 17.2 | 124 |
16 | ± 2, ± 5, ± 10% | 250 | 45 | 3.50 | 0.085 | 1100 | 16.37 | 77 | 18.7 | 116 |
18 | ± 2, ± 5, ± 10% | 250 | 41 | 3.30 | 0.066 | 1200 | 18.56 | 76 | 20.9 | 100 |
22 | ± 2, ± 5, ± 10% | 250 | 44 | 3.15 | 0.140 | 850 | 22.7 | 77 | 25.9 | 88 |
23 | ± 2, ± 5, ± 10% | 250 | 40 | 3.00 | 0.183 | 850 | 24 | 69 | 29.53 | 80 |
24 | ± 2, ± 5, ± 10% | 250 | 42 | 2.95 | 0.074 | 1100 | 24.9 | 77 | 28.9 | 91 |
27 | ± 2, ± 5, ± 10% | 250 | 44 | 2.80 | 0.150 | 780 | 28.4 | 74 | 34.0 | 84 |
30 | ± 2, ± 5, ± 10% | 250 | 49 | 2.80 | 0.130 | 920 | 31.5 | 82 | 37.9 | 82 |
33 | ± 2, ± 5, ± 10% | 250 | 45 | 2.70 | 0.170 | 680 | 34.9 | 76 | 42.9 | 80 |
36 | ± 2, ± 5, ± 10% | 250 | 44 | 2.50 | 0.225 | 720 | 38.5 | 69 | 50.0 | 64 |
39 | ± 2, ± 5, ± 10% | 250 | 48 | 2.45 | 0.19 | 680 | 41.5 | 78 | 51.9 | 74 |
43 | ± 2, ± 5, ± 10% | 250 | 45 | 2.45 | 0.17 | 810 | 45.7 | 83 | 58.1 | 76 |
47 | ± 2, ± 5, ± 10% | 200 | 47 | 2.30 | 0.24 | 680 | 50.6 | 77 | 66.9 | 72 |
51 | ± 2, ± 5, ± 10% | 200 | 49 | 2.30 | 0.28 | 660 | 54.6 | 73 | 71.3 | 62 |
56 | ± 2, ± 5, ± 10% | 200 | 50 | 2.20 | 0.30 | 610 | 60.3 | 74 | 79.9 | 56 |
68 | ± 2, ± 5, ± 10% | 200 | 46 | 2.00 | 0.33 | 600 | 75.5 | 73 | 113.3 | 49 |
72 | ± 2, ± 5, ± 10% | 150 | 46 | 1.90 | 0.42 | 550 | 80.8 | 69 | - | - |
75 | ± 2, ± 5, ± 10% | 150 | 46 | 1.90 | 0.52 | 500 | 84.6 | 71 | - | - |
82 | ± 2, ± 5, ± 10% | 150 | 45 | 1.80 | 0.46 | 510 | 94 | 62 | - | - |
91 | ± 2, ± 5, ± 10% | 150 | 45 | 1.65 | 0.58 | 440 | 103 | 64 | - | - |
100 | ± 2, ± 5, ± 10% | 150 | 49 | 1.70 | 0.54 | 470 | 114 | 69 | - | - |
110 | ± 2, ± 5, ± 10% | 150 | 47 | 1.60 | 0.58 | 440 | 126.2 | 63 | - | - |
120 | ± 2, ± 5, ± 10% | 150 | 47 | 1.55 | 0.72 | 420 | 142.4 | 61 | - | - |
150 | ± 2, ± 5, ± 10% | 150 | 47 | 1.35 | 0.82 | 390 | 188.8 | 57 | - | - |
180 | ± 2, ± 5, ± 10% | 100 | 48 | 1.30 | 1.50 | 310 | 232.2 | 50 | - | - |
200 | ± 2, ± 5, ± 10% | 100 | 47 | 1.25 | 2.00 | 280 | 265 | 47 | - | - |
210 | ± 2, ± 5, ± 10% | 100 | 48 | 1.20 | 2.00 | 280 | 288 | 45 | - | - |
220 | ± 2, ± 5, ± 10% | 100 | 47 | 1.10 | 2.00 | 280 | 315 | 41 | - | - |
250 | ± 2, ± 5, ± 10% | 100 | 45 | 1.05 | 3.00 | 240 | - | - | - | - |
270 | ± 2, ± 5, ± 10% | 100 | 46 | 1.05 | 2.25 | 260 | - | - | - | - |
300 | ± 2, ± 5, ± 10% | 100 | 47 | 0.99 | 2.80 | 220 | - | - | - | - |
330 | ± 2, ± 5, ± 10% | 100 | 46 | 0.93 | 3.60 | 180 | - | - | - | - |
360 | ± 2, ± 5, ± 10% | 100 | 47 | 0.93 | 4.00 | 170 | - | - | - | - |
390 | ± 2, ± 5, ± 10% | 100 | 47 | 0.88 | 4.00 | 170 | - | - | - | - |
WL05(H) Wire Wound Chip Inductors / High Q Type
Inductance (nH) | Tolerance | L Freq. (MHz) | Quality Factor min. | SRF (GHz) min. | DCR (Ω) max. | IDC (mA) max. |
---|---|---|---|---|---|---|
2.5 | ± 5, ± 10% | 250 | 80 @ 1500MHz | 6.00 | 0.020 | 1600 |
5.6 | ± 5, ± 10% | 250 | 98 @ 1500MHz | 6.00 | 0.035 | 1600 |
6.2 | ± 5, ± 10% | 250 | 88 @ 1000MHz | 4.75 | 0.035 | 1600 |
6.8 | ± 5, ± 10% | 250 | 80 @ 1000MHz | 4.40 | 0.035 | 1600 |
8.2 | ± 5, ± 10% | 250 | 75 @ 1000MHz | 3.00 | 0.075 | 1000 |
10 | ± 5, ± 10% | 250 | 80 @ 1000MHz | 3.00 | 0.060 | 1600 |
12 | ± 5, ± 10% | 250 | 80 @ 1000MHz | 3.00 | 0.045 | 1600 |
15 | ± 2, ± 5, ± 10% | 250 | 80 @ 1000MHz | 2.80 | 0.100 | 1200 |
16 | ± 2, ± 5, ± 10% | 250 | 72 @ 500MHz | 2.95 | 0.060 | 1500 |
18 | ± 2, ± 5, ± 10% | 250 | 75 @ 500MHz | 2.55 | 0.060 | 1400 |
20 | ± 2, ± 5, ± 10% | 250 | 70 @ 500MHz | 2.05 | 0.055 | 1400 |
22 | ± 2, ± 5, ± 10% | 250 | 80 @ 500MHz | 2.00 | 0.100 | 1200 |
27 | ± 2, ± 5, ± 10% | 250 | 75 @ 500MHz | 2.00 | 0.070 | 1300 |
30 | ± 2, ± 5, ± 10% | 250 | 65 @ 500MHz | 1.95 | 0.095 | 1200 |
39 | ± 2, ± 5, ± 10% | 250 | 65 @ 500MHz | 1.60 | 0.110 | 1100 |
48 | ± 2, ± 5, ± 10% | 200 | 65 @ 500MHz | 1.40 | 0.095 | 1200 |
51 | ± 2, ± 5, ± 10% | 200 | 65 @ 500MHz | 1.40 | 0.120 | 1000 |
WL08(H) Wire Wound Chip Inductors / High Q Type
Inductance (nH) | Tolerance | L Freq. (MHz) | Quality Factor min. | SRF (GHz) min. | DCR (Ω) max. | IDC (mA) max. |
---|---|---|---|---|---|---|
3.0 | ± 5, ± 10% | 50 | 70 @ 1500MHz | 6.00 | 0.04 | 1600 |
3.9 | ± 5, ± 10% | 50 | 75 @ 1500MHz | 6.00 | 0.05 | 1600 |
4.1 | ± 5, ± 10% | 50 | 75 @ 1500MHz | 6.00 | 0.05 | 1600 |
7.8 | ± 5, ± 10% | 50 | 75 @ 500MHz | 3.80 | 0.05 | 1600 |
10 | ± 2, ± 5, ± 10% | 50 | 60 @ 500MHz | 3.60 | 0.06 | 1600 |
12 | ± 2, ± 5, ± 10% | 50 | 70 @ 500MHz | 2.80 | 0.06 | 1500 |
18 | ± 2, ± 5, ± 10% | 50 | 62 @ 350MHz | 2.70 | 0.07 | 1400 |
22 | ± 2, ± 5, ± 10% | 50 | 62 @ 350MHz | 2.05 | 0.07 | 1400 |
33 | ± 2, ± 5, ± 10% | 50 | 75 @ 350MHz | 1.70 | 0.09 | 1300 |
39 | ± 2, ± 5, ± 10% | 50 | 75 @ 350MHz | 1.30 | 0.09 | 1300 |
47 | ± 2, ± 5, ± 10% | 50 | 75 @ 350MHz | 1.45 | 0.12 | 1200 |
56 | ± 2, ± 5, ± 10% | 50 | 75 @ 350MHz | 1.23 | 0.12 | 1200 |
68 | ± 2, ± 5, ± 10% | 50 | 80 @ 350MHz | 1.15 | 0.13 | 1100 |
82 | ± 2, ± 5, ± 10% | 50 | 80 @ 350MHz | 1.06 | 0.16 | 1100 |
100 | ± 2, ± 5, ± 10% | 50 | 50 @ 350MHz | 0.82 | 0.16 | 1000 |
120 | ± 2, ± 5, ± 10% | 100 | 50 @ 100MHz | 0.82 | 0.16 | 1000 |
☑ Parts (3.0nH, 7.8nH) are wound on a low profile bobbin. (Max 2.41 x 2.01 x 1.09)
Electrical Performance Test
Item | Requirement | Test Method |
---|---|---|
Inductance | Refer to standard electrical characteristic spec. | HP4286/E4982A |
Q | HP4286/E4982A | |
SRF | HP4287/E4982A | |
DC Resistance RDC | Micro-Ohm meter (Gom-801G)/E4982A | |
Rated Current IDC | Applied the current to coils, the temperature of coil increases ΔT15°C (Ta = 25°C). | |
Over Load | Inductors shall have no evidence of electrical and mechanical damage | Applied 2 times of rated allowed DC current to inductor for a period of 5 minutes |
Withstanding Voltage | Inductors shall be no evidence of electrical and mechanical damage. | AC voltage of 500 VAC applied between inductors terminal and case for 1 min. |
Insulation Resistance | 1000M ohm min. | 100 VDC applied between inductor terminal and case |
Mechanical Performance Test
Item | Requirement | Test Method |
---|---|---|
Vibration | Appearance: No damage L change: within ± 5% Q change: within ± 10% |
Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 min. Amplitude: 1.5 mm Time: 2 hrs for each axis (X, Y & Z), total 6 hrs |
Resistance to Soldering Heat | Solder Temperature: 260± 5°C Immersion Time: 10± 2 seconds |
|
Component Adhesion (Push Test) |
1 lbs. For 0402 2 lbs. For 0603 3 lbs. For the rest |
The device should be soldered (260± 5°C for 10 seconds) to a tinned copper subs rate. A dynamiter force gauge should be applied to the side of the component. The device must with stand a minimum force of 2 or 4 pounds without a failure of adhesion on termination |
Drop | No damage | Dropping chip by each side and each corner. Drop 10 times in total Drop height: 100 cm Drop weight: 125 g |
Solderability | 90% covered with solder | Inductor shall be dipped in a melted solder bath at 245± 5°C for 3 seconds |
Resistance to Solvent | No damage on appearance and marking |
MIL-STD-202, Method 215 |
Climatic Test
Item | Requirement | Item | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temperature Characteristic | Appearance: No damage L change: within ± 10% Q change: within ± 20% |
-40°C ~ +125°C | ||||||||||||||
Humidity | Temperature: 40± 2°C Relative Humidity: 90 ~ 95% Time: 96± 2 hrs Measured after exposure in the room condition for 2 hrs |
|||||||||||||||
Low Temperature Storage | Temperature: -40± 2°C Time: 96± 2 hrs Inductors are tested after 1 hour at room temperature |
|||||||||||||||
Thermal Shock | One cycle:
Total: 5 cycles |
|||||||||||||||
High Temperature Storage | Temperature: 125± 2°C Time: 96± 2 hrs Measured after exposure in the room condition for 1hour |
|||||||||||||||
High Temperature Load Life | There should be no evidence of short of open circuit. |
Temperature: 85± 2°C Time: 1000± 12 hrs Load: Allowed DC current |
||||||||||||||
Damp Heat with Load | Temperature: 40± 2°C Relative Humidity: 90 ~ 95% Time: 1000± 12 hrs Load: Allowed DC current |
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
Reel Dimensions & Packaging Quantity (Unit : mm)
Paper Tape specification and Packaging Quantity (Unit : mm)
Type | A | B | H | F | P | P0 | P1 | W | Reel (EA) |
---|---|---|---|---|---|---|---|---|---|
WL02 | 0.81 | 1.23 | 0.73 | 3.50 | 2.00 | 4.00 | 2.00 | 8.00 | 4,000 |
WL03 | 1.35 | 1.95 | 0.95 | 3.50 | 4.00 | 4.00 | 2.00 | 8.00 | 4,000 |
Embossed Plastic Tape specification and Packaging Quantity (Unit : mm)
Type | A | B | C | D | E | F | G | H | J | Reel (EA) |
---|---|---|---|---|---|---|---|---|---|---|
WL05 | 8 | 1.85 | 4 | 2.30 | 3.5 | 1.75 | 2 | 1.45 | 0.23 | 2,000 |
WL05 (H) | 8 | 1.85 | 4 | 2.30 | 3.5 | 1.75 | 2 | 1.45 | 0.23 | 2,000 |
WL08 | 8 | 2.70 | 4 | 2.80 | 3.5 | 1.75 | 2 | 2.00 | 0.23 | 2,000 |
WL08 (H) | 8 | 2.70 | 4 | 2.80 | 3.5 | 1.75 | 2 | 2.00 | 0.23 | 2,000 |
Résistance de précision en film mince 0,01 %, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteInducteurs céramiques haute fréquence, de petite taille jusqu'à 01005. Film mince, multicouche, bobiné,...
Lire la suiteLe condensateur céramique multicouche offre une haute tension, haute fréquence, faible bruit, haute...
Lire la suite