AUTOMOBIEL TOEPASSINGEN
Dunne film precisie weerstand 0,01%, TC2ppm, draadgebonden, anti-corrosief, MELF. Stroomdetectie, Metaal,...
Lees verderAutomotive Grade Dunne Film Precisie Chip Weerstand - AR..A Serie
AR..A Series0402 ±0.05% 50 1/16W Series374Ω 10K/Reel
Grootte | Tolerantie | TCR (ppm /℃) | Vermogen | Weerstand (Ohm) | Verpakking |
---|---|---|---|---|---|
0402 | ±0.05% | 50 | 1/16W | 374 | 10K/Reel |
Item Type |
Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
± 0.01% | ± 0.05% | ± 0.1% | ± 0.25% | ± 0.5% | ± 1% | ||||||
AR03 (0603) | 1/10W | -55 ~ +155°C | 75V | 150V | 24.9Ω - 15KΩ | - | ± 5|||||
24.9Ω - 15KΩ | 10Ω - 49.9KΩ | 10Ω - 332KΩ | ± 10 ± 15 ± 25 ± 50 |
||||||||
- | 10Ω - 49.9KΩ | 10Ω - 332KΩ | ± 10 ± 15 ± 25 ± 50 |
||||||||
AR05 (0805) | 1/8W | -55 ~ +155°C | 150V | 300V | 24.9Ω - 30KΩ | - | ± 5|||||
24.9Ω - 30KΩ | 10Ω - 100KΩ | 10Ω - 1MΩ | ± 10 ± 15 ± 25 ± 50 |
||||||||
- | 10Ω - 100KΩ | 10Ω - 1MΩ | ± 10 ± 15 ± 25 ± 50 |
||||||||
AR06 (1206) | 1/4W | -55 ~ +155°C | 200V | 400V | 24.9Ω - 50KΩ | - | ± 5 | ||||
24.9Ω - 50KΩ | 10Ω - 200KΩ | 10Ω - 1MΩ | ± 10 ± 15 ± 25 ± 50 |
||||||||
- | 10Ω - 200KΩ | 10Ω - 1MΩ | ± 10 ± 15 ± 25 ± 50 |
||||||||
AR13 (1210) | 1/ 3W | -55 ~ +155°C | 200V | 400V | - | 10Ω - 499KΩ | 10Ω - 1MΩ | ± 10 ± 15 ± 25 ± 50 |
|||
AR10 (2010) |
Operating Voltage = √ (P x R) or Max. operating voltage listed above, whichever is lower.
Overload Voltage = 2.5 x √ (P x R) or Max. overload voltage listed above, whichever is lower.
■ Viking is capable of manufacturing the optional spec based on customer's requirement.
Item | Requirement | Test Method | |
---|---|---|---|
Tol. ≦ 0.05% | Tol. > 0.05% | ||
Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS-C-5201-1 4.8 IEC-60115-1 4.8 -55°C ~ +125°C, 25°C is the reference temperature |
|
Short Time Overload | Δ R± 0.05% | JIS-C-5201-1 4.13 IEC-60115-1 4.13 RCWV x 2.5 or Max. overload voltage whichever is lower for 5 seconds |
|
Insulation Resistance | >1000 MΩ | JIS-C-5201-1 4.6 IEC-60115-1 4.6 Apply 100VDC for 1 minute |
|
Operational Life | Δ R± 0.05% | Δ R± 0.2% | MIL-STD-202 Method 108 Condition D Steady State TA=125°C at rated power. Measurement at 24± 4 hours after test conclusion. |
>7kΩ Δ R± 0.2% | |||
Δ R± 0.2% for high power rating | |||
Biased Humidity | Δ R± 0.1% | MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power. |
|
High Temperature Exposure | Δ R± 0.2% | MIL-STD-202 Method 108 at +155°C for 1000 hrs |
|
Temperature Cycling | Δ R± 0.1% | JESD22 Method JA-104 -55°C to +125°C, 1000 cycles |
|
Bending Strength (Board Flex) | Δ R± 0.1% | IEC-60115-1 4.33 JIS-C-5201-1 6.1.4 Bending once for 60 seconds. Bending displacement 2010, 2512 size: 2mm Other sizes: 3mm |
|
Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 245± 5°C for 3 seconds |
|
Resistance to Soldering Heat | Δ R± 0.05% | JIS-C-5201-1 4.18 IEC-60115-1 4.18 260± 5°C for 10 seconds |
|
Terminal strength | No broken | AEC-Q200-006 Force of 1.8kg for 60 seconds. |
|
Mechanical Shock | Δ R± 0.05% | Δ R± 0.1% | MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. |
Vibration | Δ R± 0.05% | Δ R± 0.1% | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
ESD | Δ R± 0.5% | AEC-Q200-002 Human body model AR02: 0.4KV AR03: 1KV AR05: 1.5KV AR06, AR10, AR12, AR13: 2KV |
|
Resistance to solvents | Marking Unsmeared | MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. |
|
Sulfur Test | Δ R± 1% | ASTM-B-809-95 ± 105° no power rating for 750 hrs |
|
Flammability | No ignition of the tissue paper or scorching or the pinewood board | UL-94 V-0 or V-1 are acceptable. Electrical test not required. |
RCWV (Rated continuous working voltage)= √(P x R) or Max. Operating voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
☑ Shelf Life: 2 years from production date.
3digit marking for Example: 14C=13K7Ω 13C=13K3Ω
68B=4K99Ω 68X=49.9Ω
Example: 101=100Ω 102=1KΩ
E24 | 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
Resistance | 100Ω | 2.2KΩ | 10KΩ | 49.9KΩ | 100KΩ |
---|---|---|---|---|---|
marking | 1000 | 2201 | 1002 | 4992 | 1003 |
Marking Table
Code | E96 | Code | E96 | Code | E96 | Code | E96 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
01 | 100 | 25 | 178 | 49 | 316 | 73 | 562 | ||||
02 | 102 | 26 | 182 | 50 | 324 | 74 | 576 | ||||
03 | 105 | 27 | 187 | 51 | 332 | 75 | 590 | ||||
04 | 107 | 28 | 191 | 52 | 340 | 76 | 604 | ||||
05 | 110 | 29 | 196 | 53 | 348 | 77 | 619 | ||||
06 | 113 | 30 | 200 | 54 | 357 | 78 | 634 | ||||
07 | 115 | 31 | 205 | 55 | 365 | 79 | 649 | ||||
08 | 118 | 32 | 210 | 56 | 374 | 80 | 665 | ||||
09 | 121 | 33 | 215 | 57 | 383 | 81 | 681 | ||||
10 | 124 | 34 | 221 | 58 | 392 | 82 | 698 | ||||
11 | 127 | 35 | 226 | 59 | 402 | 83 | 715 | ||||
12 | 130 | 36 | 232 | 60 | 412 | 84 | 732 | ||||
13 | 133 | 37 | 237 | 61 | 422 | 85 | 750 | ||||
14 | 137 | 38 | 243 | 62 | 432 | 86 | 768 | ||||
15 | 140 | 39 | 249 | 63 | 442 | 87 | 787 | ||||
16 | 143 | 40 | 255 | 64 | 453 | 88 | 806 | ||||
17 | 147 | 41 | 261 | 65 | 464 | 89 | 825 | ||||
18 | 150 | 42 | 267 | 66 | 475 | 90 | 845 | ||||
19 | 154 | 43 | 274 | 67 | 487 | 91 | 866 | ||||
20 | 158 | 44 | 280 | 68 | 499 | 92 | 887 | ||||
21 | 162 | 45 | 287 | 69 | 511 | 93 | 909 | ||||
22 | 165 | 46 | 294 | 70 | 523 | 94 | 931 | ||||
23 | 169 | 47 | 301 | 71 | 536 | 95 | 953 | ||||
24 | 174 | 48 | 309 | 72 | 549 | 96 | 976 | ||||
Code | A | B | C | D | E | F | G | H | X | Y | Z |
Multiplier | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 10-1 | 10-2 | 10-3 |
Packing Quantity & Reel Specifications
Type | ØA | ØB | ØC | W | T | Paper Tape (EA) | Emboss Plastic Tape (EA) |
---|---|---|---|---|---|---|---|
AR02 | 178.0 ± 1.0 | 60.0+1.0 | 13.5 ± 0.7 | 9.5 ± 1.0 | 11.5 ± 1.0 | 10,000 | - |
AR03 | 178.0 ± 1.0 | 60.0+1.0 | 13.5 ± 0.7 | 9.5 ± 1.0 | 11.5 ± 1.0 | 5,000 | - |
AR05 | 178.0 ± 1.0 | 60.0+1.0 | 13.5 ± 0.7 | 9.5 ± 1.0 | 11.5 ± 1.0 | 5,000 | - |
AR06 | 178.0 ± 1.0 | 60.0+1.0 | 13.5 ± 0.7 | 9.5 ± 1.0 | 11.5 ± 1.0 | 5,000 | - |
AR13 | 178.0 ± 1.0 | 60.0 ± 1.0 | 13.5 ± 0.7 | 9.5 ± 1.0 | 11.5 ± 1.0 | 5,000 | - |
AR10 | 178.0 ± 1.0 | 60.0+1.0 | 13.5 ± 0.7 | 13.5 ± 1.0 | 15.5 ± 1.0 | - | 4,000 |
AR12 | 178.0 ± 1.0 | 60.0+1.0 | 13.5 ± 0.7 | 13.5 ± 1.0 | 15.5 ± 1.0 | - | 4,000 |
Paper Tape Specifications
Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ØD0 (mm) | T (mm) |
---|---|---|---|---|---|---|---|---|---|---|
AR02 | 0.70 ± 0.05 | 1.16 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.40 ± 0.03 |
AR03 | 1.10 ± 0.05 | 1.90 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.60 ± 0.03 |
AR05 | 1.60 ± 0.05 | 2.37 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.75 ± 0.05 |
AR06 | 2.00 ± 0.05 | 3.55 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.75 ± 0.05 |
AR13 | 2.75 ± 0.05 | 3.40 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.60 ± 0.10 | 0.75 ± 0.05 |
■ Peel force of top cover tape.
■ The peel speed shall be about 300mm/min ± 5%.
■ The peel force of top cover tape shall be between 8gf to 60gf.
Emboss Plastic Tape Specifications
Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ØD0 (mm) | T (mm) |
---|---|---|---|---|---|---|---|---|---|---|
AR10 | 2.85 ± 0.10 | 5.45 ± 0.10 | 12.0 ± 0.10 | 1.75 ± 0.10 | 5.5 ± 0.05 | 4.00 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.50 + 0.10 | 1.00 ± 0.20 |
AR12 | 3.40 ± 0.10 | 6.65 ± 0.10 | 12.0 ± 0.10 | 1.75 ± 0.10 | 5.5 ± 0.05 | 4.00 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.50 + 0.10 | 1.00 ± 0.20 |
■ Peel force of top cover tape.
■ The peel speed shall be about 300mm / min±5%.
■ The peel force of top cover tape shall be between 20gf to 80gf.
Dunne film precisie weerstand 0,01%, TC2ppm, draadgebonden, anti-corrosief, MELF. Stroomdetectie, Metaal,...
Lees verderKeramische hoogfrequente chip spoelen, klein formaat tot 01005. Dunne film, meerlaags, draadgewonden,...
Lees verderMultilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder