Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201)Fabrikanten

Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201)

AS43JTE6201

Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201) Files Download

Anti-Gesulfureerde Dikke Film Array Chip Weerstand- AS Serie (Array)
AS Series0603 ±5% 5K/ReelnH 200 1/10W Series6.2KΩ

Grootte	Tolerantie	Tolerantie	TCR (ppm /℃)	Vermogen	Weerstand (Ohm)
0603	±5%	5K/Reel	200	1/10W	6.2K

Equivalent schakelschema

Resistor Array - CN Series Equivalent Circuit Diagram

Milieu Kenmerken

Item	Requirement			Test Method
Item	1% and Below	5%	Jumper	Test Method
Temperature Coefficient of Resistance (T.C.R.)	As Spec.			JIS C 5201-1 4.8 IEC 60115-1 4.8 At 25°C/-55°C and 25°C/ + 125°C, 25°C is the reference temperature
Short Time Overload	± (1.0% + 0.05Ω)	± (2.0% + 0.05Ω)	<50mΩ	JIS C 5201-1 4.13 IEC 60115-1 4.13 2.5 times RCWV or Max. Overload Voltage whichever is lower for 5 seconds
Insulation Resistance	≧10G			JIS C 5201-1 4.6 IEC 60115-1 4.6 Max. Overload Voltage for 1 minute
Operational Life	± (2.0% + 0.10Ω)	± (3.0% + 0.10Ω)	<100mΩ	MIL-STD-202 Method 108 Condition D Steady State TA=125°C at derated power. Measurement at 24±4 hours after test conclusion.
Biased Humidity	± (2.0% + 0.10Ω)	± (3.0% + 0.10Ω)	<100mΩ	MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power.
High Temperature Exposure	± (1.0% + 0.05Ω)	± (1.5% + 0.10Ω)	<50mΩ	MIL-STD-202 Method 108 at + 155°C for 1000 hrs
Board Flex	± (1.0% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	AEC-Q200-005 Bending once for 60 seconds 2010, 2512 sizes: 2mm Other sizes: 3mm
Solderability	>95% coverage			JIS C 5201-1 4.17 IEC 60115-1 4.17 J-STD-002 245± 5°C for 3 seconds
Resistance to Soldering Heat	± (0.5% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	MIL-STD-202 Method 210 260± 5°C for 10 seconds
Voltage Proof	No breakdown or flashover			JIS C 5201-1 4.7 IEC 60115-1 4.7 1.42 times Max. Operating Voltage for 1 minute
Leaching	Individual leaching area ≦5% Total leaching area ≦10%			JIS C 5201-1 4.18 IEC 60068-2-58 8.2.1 260± 5°C for 30 seconds
Temperature Cycling	± (0.5% + 0.05Ω)	± (1.5% + 0.05Ω)	<50mΩ	JESD22 Method JA-104 -55°C to + 125°C, 1000 cycles
Mechanical Shock	± (0.25% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6.
Vibration	± (0.5% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz
ESD	± (3% + 0.05Ω)			AEC-Q200-002 Human body model 0201: 0.5KV 0402/0603: 1KV 0805 and above: 2KV
Resistance to Solvents	No visible damage on appearance and marking.			MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents.
Terminal Strength	No broken			AEC-Q200-006 Force of 1.8kg for 60 seconds.
Flammability	No ignition of the tissue paper or scorching or the pinewood board			UL-94 V-0 or V-1 are acceptable. Electrical test not required.
Sulfur Test	△R± 0.5%		<50mΩ	EIA-977 105± 2°C, no power rating for 750 hrs.

RCWV (Rated Continuous Working Voltage) = √(P x R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH

Soldeerconditie

Soldering Condition (IPC/JEDEC J-STD-020)

Markering

No Marking for AS21 / AS41
Jumper for all: Letter "0"
1% for AS42 / AS43: 4 digits marking (non-including E24 series)

Example:

Resistance	102Ω	2.49KΩ	30K1Ω	49.9KΩ	121KΩ
marking	1020	2491	3012	4992	1213

5% for AS42 / AS43: 3 digits marking in E24
Example: 101=100Ω 102=1KΩ (1^st and 2^nd are E24 code and 3^rd code is multiplier)

E24
code

Verpakking

Reel Specifications & Packaging Quantity

Type	Packaging Quantity		Tape Width	Reel Diameter	ΦA (mm)	ΦB (mm)	ΦC (mm)	W (mm)	T (mm)
CN-21 CN-41	Paper	10K	8mm	7 inch	178.5 ± 1.5	60 + 1/-0	13.0 ± 0.2	9.0 ± 0.5	12.5 ± 0.5
CN-42	Paper	10K	8mm	7 inch	178.5 ± 1.5	60 + 1/-0	13.0 ± 0.2	9.0 ± 0.5	12.5 ± 0.5
		20K	8mm	10 inch	254 ± 1.0	100 ± 0.5	13.0 ± 0.2	9.5 ± 0.5	13.5 ± 0.5
		40K	8mm	13 inch	330 ± 1.0	100 ± 0.5	13.0 ± 0.2	9.5 ± 0.5	13.5 ± 0.5
CN-43	Paper	5K	8mm	7 inch	178.5 ± 1.5	60 + 1/-0	13.0 ± 0.2	9.0 ± 0.5	12.5 ± 0.5
		10K	8mm	10 inch	254 ± 1.0	100 ± 0.5	13.0 ± 0.2	9.5 ± 0.5	13.5 ± 0.5
		20K	8mm	13 inch	330 ± 1.0	100 ± 0.5	13.0 ± 0.2	9.5 ± 0.5	13.5 ± 0.5

Paper Tape Specifications

Type	A (mm)	B (mm)	W (mm)	E (mm)	F (mm)	P0 (mm)	P1 (mm)	P2 (mm)	ΦD0 (mm)	T (mm)
CN-21	0.77 ± 0.05	0.97 ± 0.05	8.0 ± 0.2	1.75 ± 0.1	3.5 ± 0.05	4.0 ± 0.1	2.0 ± 0.05	2.0 ± 0.05	1.50 + 0.1, -0	0.50 ± 0.1
CN-41	0.77 ± 0.05	1.57 ± 0.05	8.0 ± 0.2	1.75 ± 0.1	3.5 ± 0.05	4.0 ± 0.1	2.0 ± 0.05	2.0 ± 0.05	1.50 + 0.1, -0	0.50 ± 0.1
CN-42	1.20 ± 0.1	2.20 ± 0.1	8.0 ± 0.2	1.75 ± 0.1	3.5 ± 0.05	4.0 ± 0.1	2.0 ± 0.05	2.0 ± 0.05	1.50 + 0.1, -0	0.70 ± 0.1
CN-43	1.95 ± 0.1	3.50 ± 0.1	8.0 ± 0.2	1.75 ± 0.1	3.5 ± 0.05	4.0 ± 0.1	4.0 ± 0.05	2.0 ± 0.05	1.50 + 0.1, -0	0.85 ± 0.1

Code

6201

Bestanden downloaden

Datasheet
Anti-zwavel dikke film chipweerstand - AS-serie (Chip)

Label
metalen weerstanden

ZOEKEN

Voorwaarde zoeken: Kruis zoeken

Beste Verkoop

Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201)Fabrikant - Viking

Gevestigd in Taiwan, is Viking Tech Corporation sinds 1997 een van de belangrijkste Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201) fabrikanten.En hun producten worden gebruikt in de hele automotive en elektronische toepassingen, met een fabricagetolerantie tot 0,01% en TCR tot 2 ppm in een breed scala aan verpakkingsformaten.

TS16949/ ISO9001/ ISO14001 en voldoet aan de AEC-Q200 normen, Viking biedt anti-zwavel, anti-surge, pulserende, hoge spanning, hoge vermogen precisie weerstanden aan, inclusief dunne/dikke film weerstanden, automotive weerstanden, melf weerstanden, stroomdetectie weerstanden, enzovoort. Lage ruis, lage TC, hoogvermogen spoelen zoals rf-spoelen, chip-spoelen, vermogensspoelen, variabele spoelen, ferrite chip-spoelen, afgeschermde spoelen, draadgewonden spoelen en dip-spoelen.

Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201)Viking biedt klanten al 25 jaar hoogwaardige vermogensweerstanden, vermogensinductoren en aluminium elektrolytische condensatoren met een solide reputatie. Met geavanceerde technologie en 25 jaar ervaring zorgt Viking ervoor dat aan de eisen van elke klant wordt voldaan.

Bekijk onze kwaliteitsproducten Vermogen Inductor, Dunne Film Chip Weerstand, RF-inductor, Chipweerstand, stroom sense weerstand, metaalfilm, metaalweerstanden, Dikke film weerstand, Chipcondensator, Vermogen Weerstand en voel je vrij om Neem contact met ons op.

Hoofdproduct

AUTOMOBIEL TOEPASSINGEN

Dunne film precisie weerstand 0,01%, TC2ppm, draadgebonden, anti-corrosief, MELF. Stroomdetectie, Metaal,...

Lees verder

MEDISCHE TOEPASSINGEN

Keramische hoogfrequente chip spoelen, klein formaat tot 01005. Dunne film, meerlaags, draadgewonden,...

Lees verder

COMMUNICATIE TOEPASSINGEN

Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....

Lees verder

Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201)Fabrikanten - Viking

Anti-Gesulfureerde Dikke Film Array Chip Weerstand (AS Serie (Array) AS43JTE6201)