AUTOMOTIVE ANWENDUNGEN
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondable, Anti-Korrosiv, MELF. Strommessung, Metall,...
WeiterlesenTO-247 Leistungswiderstände (TR100 Serie TR100JBD0130)
TR100JBD0130
Hochleistungswiderstand, Dickschicht mit verpackten TO247-Anwendungen für Schaltnetzteile und Snubber-Schaltungen, automatisierte Maschinensteuerung, RF-Leistungsverstärker, Niedrigenergie-Pulsbelastung, USV, Spannungsregelung, Entladewiderstand.
TR100 Series±5% 50 100W Series13Ω TO247
| Toleranz | TCR (ppm /℃) | Leistung | Widerstand (Ohm) | Verpackung |
|---|---|---|---|---|
| ±5% | 50 | 100W | 13 | TO247 |
Spezifikationen der elektrischen Eigenschaften
| Item Type |
Resistance Range | TCR (PPM/°C) | |||
|---|---|---|---|---|---|
| ±0.5% | ±1% | ±5% | ±10% | ||
| TR100 | - | - | 0.05Ω - 0.1Ω | No Specified (±300 ~ ±700) | |
| - | ≧0.1Ω - 1Ω | ±300 | |||
| - | ≧1Ω - 5Ω | ±100 ±200 ±300 |
|||
| ≧5Ω - 10Ω | ±100 ±200 ±300 |
||||
| ≧10Ω - 100KΩ | ±50 ±100 ±200 |
||||
☑ Operating Voltage: 700V Max.
☑ Dielectric Strength: 2500VAC
☑ Insulation Resistance: 10GΩ min.
☑ Working Temperature Range: -65°C to +175°C
Umwelteigenschaften
| Item | Requirement | Test Method |
|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) |
As Spec. | Referenced to 25°C, DR taken at +105°C |
| Load Life | DR±1.0% | Rated power, 2,000 hours |
| Solderability | 90% min. coverage | 245±5°C for 3 seconds |
| Momentary Overload | DR±0.3% | 1.5 times rated power and V (dc) ≦ 1.5VMax. for 5 seconds |
| Dielectric strength | DR±0.15% | 2500V AC, 60 seconds |
| Moisture resistance | DR±0.5% | -10°C ~+65°C, RH>90%, cycle 240 hours |
| Thermal Shock | DR±0.3% | -65°C ~150°C, 100 cycles |
| Terminal Strength | DR±0.2% | (Pull Test) 2.4N |
| Vibration, High Frequency | DR±0.2% | 20g peak |
- Lead Material: Tinned Copper
- Maximum Torque: 0.9 Nm
- When in Free Air at 25°C, the TR100 is Rated for 3.5W
- The Case Temperature is to be used for the Definition of the Applied Power Limit
- The Case Temperature Measurement must be made with a Thermocouple Contacting the Center of the Component mounted on the Designed Heat Sink.
- Thermal Grease should be Applied Properly
Code
- 0130
- Dateien herunterladen
-
-
Hauptprodukt
MEDIZINISCHE ANWENDUNGEN
Keramische Hochfrequenz-Chip-Induktivitäten, kleine Größe bis 01005. Dünnschicht-, Multilayer-, Drahtgewickelte-,...
Weiterlesen
KOMMUNIKATIONSANWENDUNGEN
Multilayer-Keramikkondensatoren bieten hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Q, niedrigen...
Weiterlesen