
APPLICAZIONI AUTOMOTIVE
Resistore di precisione a film sottile 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Rilevamento di corrente,...
Leggi di piùLa protezione Surge/Pulse è essenziale per tutti i progetti di circuiti. Serie SWR, dimensioni da 0402-2512, tolleranza 5%~10%, 1ohm~20Mohm. La progettazione dei circuiti sta diventando sempre più critica. La protezione Surge/Pulse è essenziale per tutti i progetti di circuiti. La serie SWR di Viking, non rifilata sullo strato di resistenza, rimane il resistore superiore in grado di sopportare impulsi e ESD, adatto per la protezione dei circuiti elettronici contro impulsi e sovratensioni estreme. I resistori che sopportano l'impulso o il picco sono necessari nel circuito dove una grande corrente viene applicata istantaneamente o viene applicata una scarica elettrostatica (ESD). Surge significa sovraccarico come ESD o alta tensione con breve durata. I resistori Anti-Surge possono prevenire i danni causati da grandi potenze applicate istantaneamente.


| Item Type | Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | ||
|---|---|---|---|---|---|---|---|---|
| ±5% (E24) | ±10% (E24) | ±20% (E24) | ||||||
| SWR02 (0402) | 1/5W | -55 ~ +155°C | 50V | 100V | 1Ω -20Ω | ±300 | ||
| 22Ω - 1MΩ | ±100 | |||||||
| SWR03 (0603) | 1/8W | -55 ~ +155°C | 50V | 100V | 1Ω - 270Ω | ±200 | ||
| 300Ω - 1MΩ | ±100 | |||||||
| SWR05 (0805) | 1/4W | -55 ~ +155°C | 150V | 300V | 1Ω - 270Ω | ±200 | ||
| 300Ω - 20MΩ | ±100 | |||||||
| SWR06 (1206) | 1/3W | -55 ~ +155°C | 200V | 400V | 1Ω - 20Ω | ±200 | ||
| 22Ω - 20MΩ | ±100 | |||||||
| SWR13 (1210) | 1/2W | -55 ~ +155°C | 200V | 400V | 1Ω - 20Ω | ±200 | ||
| 22Ω - 20MΩ | ±100 | |||||||
| SWR10 (2010) | 3/4W | -55 ~ +155°C | 400V | 800V | 1Ω - 20Ω | ±200 | ||
| 22Ω - 20MΩ | ±100 | |||||||
| SWR12 (2512) | 1.5W | -55 ~ +155°C | 500V | 1000V | 1Ω - 20Ω | ±200 | ||
| 22Ω - 20MΩ | ±100 | |||||||
Operating Voltage=√(P*R) or Max. Operating Voltage listed above, whichever is lower.
Overload Voltage=2.5*√(P*R) or Max. Overload Voltage listed above, whichever is lower.
The power rating depends on the maximum temperature of the resistive element. Due to the power dissipation of the resistor, the temperature of the resistive element will rise depending on the condition of heat dissipation from PCB. The maximum power rating in application only applies if the temperature of the resistive element is not exceed 155 ° C.
☑ Viking is capable of manufacturing the optional spec based on customer's requirement.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value.
Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700 pulse shapes. The limit of acceptance is a shift in resistance of less than 1% from the initial value.
| Image | Dimensione | Tolleranza | TCR (ppm /℃) | Potenza | Resistenza (Ohm) | Pacchetto | Download dei file | Azione |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0010)
| 0402 | 0.05 | 300 | 1/5W | 1 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP1R10)
| 0402 | 0.05 | 300 | 1/5W | 1.1 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP1R20)
| 0402 | 0.05 | 300 | 1/5W | 1.2 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP1R30)
| 0402 | 0.05 | 300 | 1/5W | 1.3 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP1R50)
| 0402 | 0.05 | 300 | 1/5W | 1.5 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP1R60)
| 0402 | 0.05 | 300 | 1/5W | 1.6 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP1R80)
| 0402 | 0.05 | 300 | 1/5W | 1.8 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0020)
| 0402 | 0.05 | 300 | 1/5W | 2 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP2R20)
| 0402 | 0.05 | 300 | 1/5W | 2.2 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP2R40)
| 0402 | 0.05 | 300 | 1/5W | 2.4 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP2R70)
| 0402 | 0.05 | 300 | 1/5W | 2.7 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0030)
| 0402 | 0.05 | 300 | 1/5W | 3 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP3R30)
| 0402 | 0.05 | 300 | 1/5W | 3.3 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP3R60)
| 0402 | 0.05 | 300 | 1/5W | 3.6 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP3R90)
| 0402 | 0.05 | 300 | 1/5W | 3.9 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP4R30)
| 0402 | 0.05 | 300 | 1/5W | 4.3 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP4R70)
| 0402 | 0.05 | 300 | 1/5W | 4.7 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP5R10)
| 0402 | 0.05 | 300 | 1/5W | 5.1 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP5R60)
| 0402 | 0.05 | 300 | 1/5W | 5.6 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP6R20)
| 0402 | 0.05 | 300 | 1/5W | 6.2 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP6R80)
| 0402 | 0.05 | 300 | 1/5W | 6.8 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP7R50)
| 0402 | 0.05 | 300 | 1/5W | 7.5 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP8R20)
| 0402 | 0.05 | 300 | 1/5W | 8.2 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP9R10)
| 0402 | 0.05 | 300 | 1/5W | 9.1 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0100)
| 0402 | 0.05 | 300 | 1/5W | 10 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0110)
| 0402 | 0.05 | 300 | 1/5W | 11 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0120)
| 0402 | 0.05 | 300 | 1/5W | 12 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0130)
| 0402 | 0.05 | 300 | 1/5W | 13 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0150)
| 0402 | 0.05 | 300 | 1/5W | 15 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0160)
| 0402 | 0.05 | 300 | 1/5W | 16 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0180)
| 0402 | 0.05 | 300 | 1/5W | 18 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTGP0200)
| 0402 | 0.05 | 300 | 1/5W | 20 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0220)
| 0402 | 0.05 | 100 | 1/5W | 22 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0240)
| 0402 | 0.05 | 100 | 1/5W | 24 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0270)
| 0402 | 0.05 | 100 | 1/5W | 27 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0300)
| 0402 | 0.05 | 100 | 1/5W | 30 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0330)
| 0402 | 0.05 | 100 | 1/5W | 33 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0360)
| 0402 | 0.05 | 100 | 1/5W | 36 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0390)
| 0402 | 0.05 | 100 | 1/5W | 39 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0430)
| 0402 | 0.05 | 100 | 1/5W | 43 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0470)
| 0402 | 0.05 | 100 | 1/5W | 47 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0510)
| 0402 | 0.05 | 100 | 1/5W | 51 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0560)
| 0402 | 0.05 | 100 | 1/5W | 56 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0620)
| 0402 | 0.05 | 100 | 1/5W | 62 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0680)
| 0402 | 0.05 | 100 | 1/5W | 68 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0750)
| 0402 | 0.05 | 100 | 1/5W | 75 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0820)
| 0402 | 0.05 | 100 | 1/5W | 82 | 10K/Reel |
| Aggiungi alla lista |
Resistore a chip con resistenza ai picchi (Serie SWR SWR02JTEP0910)
| 0402 | 0.05 | 100 | 1/5W | 91 | 10K/Reel |
| Aggiungi alla lista |
|---|

Resistore di precisione a film sottile 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Rilevamento di corrente,...
Leggi di più
Induttori a chip ceramici ad alta frequenza, dimensioni ridotte fino a 01005. Induttore a film sottile,...
Leggi di più
Il condensatore ceramico multistrato offre alta tensione, alta frequenza, basso rumore, alta Q, basso...
Leggi di più