APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, wirebondale, anti-corrosivo, MELF. Detección...
Lee masInductores de ferrita enrollados en alambre (Serie NL)
0402 / 0603 / 0805 / 1008 / 1210 / 1812 / 2220
Inductor de ferrita de chip enrollado, alta corriente, disponible en tipo moldeado y tipo abierto. Tamaño pequeño hasta 0603, soldabilidad muy fuerte mediante soldadura por flujo o soldador de soldadura, soldadura por ola. Altamente resistente a golpes mecánicos y presión. Altamente confiable en entornos de cambios repentinos de temperatura y humedad. Características de super Q.
Características
- Muy buena soldabilidad por soldadura por flujo, soldador o soldadura por ola.
- Dimensiones altamente precisas, se pueden montar automáticamente.
- Los terminales son altamente resistentes a fuerzas de tracción.
- Altamente resistentes a choques mecánicos y presión.
- Altamente confiables en entornos de cambios bruscos de temperatura y humedad, características Super Q.
- Nivel de sensibilidad a la humedad 1
Aplicaciones
- Televisores Micro, Televisores de Cristal Líquido, Cámaras de Video, VCRs Portátiles, Radios de Coche, Estéreos de Coche, Radios de Cinta Delgada, Sintonizadores de Televisión, Teléfonos Móviles, Radio y Otros Dispositivos Electrónicos.
Construcción
Codificación de Colores
0603 / 0805 Type (except NL02 / NL08
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Numeración de Parte
Especificaciones Eléctricas Estándar
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.05 | 2000 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R39 | 0.39 | ± 10, ± 20% | 12 | 7.9 | 400 | 0.40 | 500 |
| R47 | 0.47 | ± 10, ± 20% | 12 | 25 | 600 | 0.27 | 700 |
| R56 | 0.56 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R68 | 0.68 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R82 | 0.82 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R90 | 0.90 | ± 10, ± 20% | 20 | 7.9 | 300 | 0.35 | 1400 |
| 1R0 | 1.0 | ± 10, ± 20% | 18 | 7.9 | 230 | 0.62 | 700 |
| 1R2 | 1.2 | ± 10, ± 20% | 18 | 7.9 | 210 | 0.68 | 650 |
| 1R5 | 1.5 | ± 10, ± 20% | 18 | 7.9 | 190 | 0.76 | 630 |
| 1R8 | 1.8 | ± 10, ± 20% | 18 | 7.9 | 170 | 0.84 | 600 |
| 2R0 | 2.0 | ± 10, ± 20% | 18 | 7.9 | 160 | 1.10 | 550 |
| 2R2 | 2.2 | ± 10, ± 20% | 18 | 7.9 | 150 | 1.10 | 520 |
| 2R7 | 2.7 | ± 10, ± 20% | 18 | 7.9 | 135 | 1.28 | 490 |
| 3R3 | 3.3 | ± 10, ± 20% | 18 | 7.9 | 120 | 1.46 | 450 |
| 3R9 | 3.9 | ± 10, ± 20% | 18 | 7.9 | 105 | 2.30 | 300 |
| 4R7 | 4.7 | ± 10, ± 20% | 18 | 7.9 | 90 | 2.00 | 400 |
| 5R6 | 5.6 | ± 10, ± 20% | 15 | 7.9 | 80 | 1.80 | 380 |
| 6R8 | 6.8 | ± 10, ± 20% | 15 | 7.9 | 70 | 2.00 | 360 |
| 8R2 | 8.2 | ± 10, ± 20% | 15 | 7.9 | 65 | 2.65 | 330 |
| 100 | 10 | ± 10, ± 20% | 12 | 2.5 | 60 | 2.95 | 300 |
| 150 | 15 | ± 10, ± 20% | 12 | 2.5 | 30 | 3.70 | 280 |
| 180 | 18 | ± 10, ± 20% | 12 | 2.5 | 26 | 4.00 | 160 |
| 220 | 22 | ± 10, ± 20% | 12 | 2.5 | 22 | 6.14 | 270 |
| 330 | 33 | ± 10, ± 20% | 10 | 2.5 | 12 | 7.00 | 200 |
| 390 | 39 | ± 10, ± 20% | 10 | 2.5 | 16 | 10.00 | 180 |
| 470 | 47 | ± 10, ± 20% | 10 | 2.5 | 10 | 10.70 | 160 |
| 560 | 56 | ± 10, ± 20% | 10 | 2.5 | 8 | 12.00 | 170 |
| 680 | 68 | ± 10, ± 20% | 10 | 2.5 | 6 | 13.50 | 145 |
| 820 | 82 | ± 10, ± 20% | 8 | 2.5 | 6 | 20.00 | 100 |
| 101 | 100 | ± 10, ± 20% | 8 | 1 | 4 | 21.00 | 80 |
Rating DC current: Inductance drop approximately 30% of L0 at Isat.
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Descarga de Archivos
-
- Informe RoHS
-
-
- ALCANCE
| Image | Tamaño | Tolerancia | Inductancia | Condición de prueba | DCR (Ω) máx. | IDC (mA) | Q | SRF | Descarga de Archivos | Acción |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT1R0) 
|
0603 |
±10% |
1 |
7.9MHz |
0.416 |
860 |
16 |
390 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT1R5)
|
0603 |
±10% |
1.5 |
7.9MHz |
0.52 |
720 |
16 |
160 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT1R8)
|
0603 |
±10% |
1.8 |
7.9MHz |
0.559 |
640 |
16 |
121 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT2R2)
|
0603 |
±10% |
2.2 |
7.9MHz |
0.728 |
600 |
16 |
103 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT2R7)
|
0603 |
±10% |
2.7 |
7.9MHz |
0.806 |
540 |
16 |
72 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT3R3)
|
0603 |
±10% |
3.3 |
7.9MHz |
0.91 |
500 |
16 |
66 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT3R9)
|
0603 |
±10% |
3.9 |
7.9MHz |
1.079 |
460 |
16 |
61 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT4R7)
|
0603 |
±10% |
4.7 |
7.9MHz |
1.261 |
400 |
16 |
51 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT5R6)
|
0603 |
±10% |
5.6 |
7.9MHz |
1.43 |
380 |
16 |
47 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT6R8)
|
0603 |
±10% |
6.8 |
7.9MHz |
1.95 |
340 |
16 |
43 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT8R2)
|
0603 |
±10% |
8.2 |
7.9MHz |
2.184 |
300 |
16 |
40 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT100)
|
0603 |
±10% |
10 |
2.5MHz |
2.405 |
280 |
14 |
36 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT120)
|
0603 |
±10% |
12 |
2.5MHz |
2.964 |
260 |
14 |
32 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT150)
|
0603 |
±10% |
15 |
2.5MHz |
3.38 |
240 |
14 |
29 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT180)
|
0603 |
±10% |
18 |
2.5MHz |
3.77 |
220 |
14 |
28 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT220)
|
0603 |
±10% |
22 |
2.5MHz |
4.693 |
200 |
14 |
24 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT270)
|
0603 |
±10% |
27 |
2.5MHz |
6.76 |
140 |
14 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KT330)
|
0603 |
±10% |
33 |
2.5MHz |
8.58 |
120 |
14 |
15 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTR11)
|
0805 |
±10% |
0.11 |
25MHz |
0.18 |
2000 |
25 |
1200 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR12)
|
0805 |
±5% |
0.12 |
25MHz |
0.18 |
1500 |
25 |
1000 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR15)
|
0805 |
±5% |
0.15 |
25MHz |
0.2 |
1400 |
25 |
1000 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR18)
|
0805 |
±5% |
0.18 |
25MHz |
0.25 |
1400 |
30 |
1000 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR22)
|
0805 |
±5% |
0.22 |
25MHz |
0.38 |
1350 |
30 |
830 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR27)
|
0805 |
±5% |
0.27 |
25MHz |
0.35 |
1300 |
30 |
800 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR33)
|
0805 |
±5% |
0.33 |
25MHz |
0.35 |
1200 |
30 |
750 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR39)
|
0805 |
±5% |
0.39 |
25MHz |
0.4 |
1160 |
30 |
700 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR47)
|
0805 |
±5% |
0.47 |
25MHz |
0.4 |
1100 |
30 |
690 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR56)
|
0805 |
±5% |
0.56 |
25MHz |
0.45 |
1040 |
30 |
640 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR62)
|
0805 |
±5% |
0.62 |
25MHz |
0.5 |
980 |
30 |
640 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR68)
|
0805 |
±5% |
0.68 |
25MHz |
0.5 |
900 |
30 |
510 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR82)
|
0805 |
±5% |
0.82 |
25MHz |
0.55 |
900 |
30 |
500 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTR91)
|
0805 |
±5% |
0.91 |
25MHz |
0.5 |
900 |
30 |
500 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT1R0)
|
0805 |
±5% |
1 |
7.9MHz |
0.75 |
840 |
15 |
470 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT1R2)
|
0805 |
±5% |
1.2 |
7.9MHz |
1 |
800 |
15 |
400 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT1R5)
|
0805 |
±5% |
1.5 |
7.9MHz |
1 |
720 |
15 |
400 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT1R8)
|
0805 |
±5% |
1.8 |
7.9MHz |
1.05 |
660 |
15 |
230 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT2R2)
|
0805 |
±5% |
2.2 |
7.9MHz |
1.18 |
600 |
15 |
200 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT2R7)
|
0805 |
±5% |
2.7 |
7.9MHz |
1.26 |
500 |
15 |
130 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT3R3)
|
0805 |
±5% |
3.3 |
7.9MHz |
1.75 |
480 |
15 |
160 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT3R9)
|
0805 |
±5% |
3.9 |
7.9MHz |
1.75 |
440 |
15 |
130 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT4R7)
|
0805 |
±5% |
4.7 |
7.9MHz |
1.87 |
390 |
15 |
120 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT5R6)
|
0805 |
±5% |
5.6 |
7.9MHz |
2 |
340 |
15 |
90 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT6R8)
|
0805 |
±5% |
6.8 |
7.9MHz |
2.15 |
300 |
15 |
55 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT8R2)
|
0805 |
±5% |
8.2 |
7.9MHz |
2.37 |
280 |
15 |
40 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT100)
|
0805 |
±5% |
10 |
2.5MHz |
2.55 |
260 |
10 |
40 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT120)
|
0805 |
±5% |
12 |
2.5MHz |
2.8 |
220 |
16 |
37 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT150)
|
0805 |
±5% |
15 |
2.5MHz |
3.8 |
200 |
16 |
30 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT180)
|
0805 |
±5% |
18 |
2.5MHz |
4.48 |
180 |
16 |
23 |
|
Agregar a la lista |
|---|
Aplicación
APLICACIONES MÉDICAS
Inductores de chip cerámicos de alta frecuencia, tamaño pequeño hasta 01005. Inductor de película...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alta Q, bajo TCR....
Lee mas