AUTOMOTIEVE TOEPASSINGEN
Dunne film precisieweerstand 0,01%, TC2ppm, draadverbinding, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderFerrite draadgewonden spoelen (NL-serie)
0402 / 0603 / 0805 / 1008 / 1210 / 1812 / 2220
Draadgewonden chip ferrietinductor, hoge stroom, verkrijgbaar in gegoten en open type. Kleine afmetingen tot 0603, zeer sterke soldeerbaarheid door golfsolderen of soldeerbout, golfsolderen. Zeer bestand tegen mechanische schokken en druk. Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid. Super Q-eigenschappen.
Kenmerken
- Zeer sterke soldeerbaarheid door doorstroomsolderen, soldeerbout of golfsolderen.
- Zeer nauwkeurige afmetingen, kan automatisch worden gemonteerd.
- Terminals zijn zeer bestand tegen trekkrachten.
- Zeer bestand tegen mechanische schokken en druk.
- Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid Super Q kenmerken.
- Vochtgevoeligheidsniveau 1
Toepassingen
- Micro televisies, vloeibare kristal televisies, videocamera's, draagbare videorecorders, autoradio's, autoradio's, dunne tape radio's, televisietuners, mobiele telefoons, radio's en andere elektronische apparaten.
Constructie
Kleurcodering
0603 / 0805 Type (except NL02 / NL08
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Onderdeelnummering
Standaard elektrische specificaties
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.05 | 2000 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R39 | 0.39 | ± 10, ± 20% | 12 | 7.9 | 400 | 0.40 | 500 |
| R47 | 0.47 | ± 10, ± 20% | 12 | 25 | 600 | 0.27 | 700 |
| R56 | 0.56 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R68 | 0.68 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R82 | 0.82 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R90 | 0.90 | ± 10, ± 20% | 20 | 7.9 | 300 | 0.35 | 1400 |
| 1R0 | 1.0 | ± 10, ± 20% | 18 | 7.9 | 230 | 0.62 | 700 |
| 1R2 | 1.2 | ± 10, ± 20% | 18 | 7.9 | 210 | 0.68 | 650 |
| 1R5 | 1.5 | ± 10, ± 20% | 18 | 7.9 | 190 | 0.76 | 630 |
| 1R8 | 1.8 | ± 10, ± 20% | 18 | 7.9 | 170 | 0.84 | 600 |
| 2R0 | 2.0 | ± 10, ± 20% | 18 | 7.9 | 160 | 1.10 | 550 |
| 2R2 | 2.2 | ± 10, ± 20% | 18 | 7.9 | 150 | 1.10 | 520 |
| 2R7 | 2.7 | ± 10, ± 20% | 18 | 7.9 | 135 | 1.28 | 490 |
| 3R3 | 3.3 | ± 10, ± 20% | 18 | 7.9 | 120 | 1.46 | 450 |
| 3R9 | 3.9 | ± 10, ± 20% | 18 | 7.9 | 105 | 2.30 | 300 |
| 4R7 | 4.7 | ± 10, ± 20% | 18 | 7.9 | 90 | 2.00 | 400 |
| 5R6 | 5.6 | ± 10, ± 20% | 15 | 7.9 | 80 | 1.80 | 380 |
| 6R8 | 6.8 | ± 10, ± 20% | 15 | 7.9 | 70 | 2.00 | 360 |
| 8R2 | 8.2 | ± 10, ± 20% | 15 | 7.9 | 65 | 2.65 | 330 |
| 100 | 10 | ± 10, ± 20% | 12 | 2.5 | 60 | 2.95 | 300 |
| 150 | 15 | ± 10, ± 20% | 12 | 2.5 | 30 | 3.70 | 280 |
| 180 | 18 | ± 10, ± 20% | 12 | 2.5 | 26 | 4.00 | 160 |
| 220 | 22 | ± 10, ± 20% | 12 | 2.5 | 22 | 6.14 | 270 |
| 330 | 33 | ± 10, ± 20% | 10 | 2.5 | 12 | 7.00 | 200 |
| 390 | 39 | ± 10, ± 20% | 10 | 2.5 | 16 | 10.00 | 180 |
| 470 | 47 | ± 10, ± 20% | 10 | 2.5 | 10 | 10.70 | 160 |
| 560 | 56 | ± 10, ± 20% | 10 | 2.5 | 8 | 12.00 | 170 |
| 680 | 68 | ± 10, ± 20% | 10 | 2.5 | 6 | 13.50 | 145 |
| 820 | 82 | ± 10, ± 20% | 8 | 2.5 | 6 | 20.00 | 100 |
| 101 | 100 | ± 10, ± 20% | 8 | 1 | 4 | 21.00 | 80 |
Rating DC current: Inductance drop approximately 30% of L0 at Isat.
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Bestanden downloaden
-
- RoHS Rapport
-
-
- BEREIK
| Image | Grootte | Tolerantie | Inductantie | Testconditie | DCR (Ω) max. | IDC (mA) | Q | SRF | Bestanden downloaden | Actie |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT1R0) 
|
0603 |
±10% |
1 |
7.9MHz |
0.416 |
860 |
16 |
390 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT1R5)
|
0603 |
±10% |
1.5 |
7.9MHz |
0.52 |
720 |
16 |
160 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT1R8)
|
0603 |
±10% |
1.8 |
7.9MHz |
0.559 |
640 |
16 |
121 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT2R2)
|
0603 |
±10% |
2.2 |
7.9MHz |
0.728 |
600 |
16 |
103 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT2R7)
|
0603 |
±10% |
2.7 |
7.9MHz |
0.806 |
540 |
16 |
72 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT3R3)
|
0603 |
±10% |
3.3 |
7.9MHz |
0.91 |
500 |
16 |
66 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT3R9)
|
0603 |
±10% |
3.9 |
7.9MHz |
1.079 |
460 |
16 |
61 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT4R7)
|
0603 |
±10% |
4.7 |
7.9MHz |
1.261 |
400 |
16 |
51 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT5R6)
|
0603 |
±10% |
5.6 |
7.9MHz |
1.43 |
380 |
16 |
47 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT6R8)
|
0603 |
±10% |
6.8 |
7.9MHz |
1.95 |
340 |
16 |
43 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT8R2)
|
0603 |
±10% |
8.2 |
7.9MHz |
2.184 |
300 |
16 |
40 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT100)
|
0603 |
±10% |
10 |
2.5MHz |
2.405 |
280 |
14 |
36 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT120)
|
0603 |
±10% |
12 |
2.5MHz |
2.964 |
260 |
14 |
32 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT150)
|
0603 |
±10% |
15 |
2.5MHz |
3.38 |
240 |
14 |
29 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT180)
|
0603 |
±10% |
18 |
2.5MHz |
3.77 |
220 |
14 |
28 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT220)
|
0603 |
±10% |
22 |
2.5MHz |
4.693 |
200 |
14 |
24 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT270)
|
0603 |
±10% |
27 |
2.5MHz |
6.76 |
140 |
14 |
20 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL03KT330)
|
0603 |
±10% |
33 |
2.5MHz |
8.58 |
120 |
14 |
15 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05KTR11)
|
0805 |
±10% |
0.11 |
25MHz |
0.18 |
2000 |
25 |
1200 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR12)
|
0805 |
±5% |
0.12 |
25MHz |
0.18 |
1500 |
25 |
1000 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR15)
|
0805 |
±5% |
0.15 |
25MHz |
0.2 |
1400 |
25 |
1000 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR18)
|
0805 |
±5% |
0.18 |
25MHz |
0.25 |
1400 |
30 |
1000 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR22)
|
0805 |
±5% |
0.22 |
25MHz |
0.38 |
1350 |
30 |
830 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR27)
|
0805 |
±5% |
0.27 |
25MHz |
0.35 |
1300 |
30 |
800 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR33)
|
0805 |
±5% |
0.33 |
25MHz |
0.35 |
1200 |
30 |
750 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR39)
|
0805 |
±5% |
0.39 |
25MHz |
0.4 |
1160 |
30 |
700 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR47)
|
0805 |
±5% |
0.47 |
25MHz |
0.4 |
1100 |
30 |
690 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR56)
|
0805 |
±5% |
0.56 |
25MHz |
0.45 |
1040 |
30 |
640 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR62)
|
0805 |
±5% |
0.62 |
25MHz |
0.5 |
980 |
30 |
640 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR68)
|
0805 |
±5% |
0.68 |
25MHz |
0.5 |
900 |
30 |
510 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR82)
|
0805 |
±5% |
0.82 |
25MHz |
0.55 |
900 |
30 |
500 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTR91)
|
0805 |
±5% |
0.91 |
25MHz |
0.5 |
900 |
30 |
500 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT1R0)
|
0805 |
±5% |
1 |
7.9MHz |
0.75 |
840 |
15 |
470 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT1R2)
|
0805 |
±5% |
1.2 |
7.9MHz |
1 |
800 |
15 |
400 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT1R5)
|
0805 |
±5% |
1.5 |
7.9MHz |
1 |
720 |
15 |
400 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT1R8)
|
0805 |
±5% |
1.8 |
7.9MHz |
1.05 |
660 |
15 |
230 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT2R2)
|
0805 |
±5% |
2.2 |
7.9MHz |
1.18 |
600 |
15 |
200 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT2R7)
|
0805 |
±5% |
2.7 |
7.9MHz |
1.26 |
500 |
15 |
130 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT3R3)
|
0805 |
±5% |
3.3 |
7.9MHz |
1.75 |
480 |
15 |
160 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT3R9)
|
0805 |
±5% |
3.9 |
7.9MHz |
1.75 |
440 |
15 |
130 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT4R7)
|
0805 |
±5% |
4.7 |
7.9MHz |
1.87 |
390 |
15 |
120 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT5R6)
|
0805 |
±5% |
5.6 |
7.9MHz |
2 |
340 |
15 |
90 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT6R8)
|
0805 |
±5% |
6.8 |
7.9MHz |
2.15 |
300 |
15 |
55 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT8R2)
|
0805 |
±5% |
8.2 |
7.9MHz |
2.37 |
280 |
15 |
40 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT100)
|
0805 |
±5% |
10 |
2.5MHz |
2.55 |
260 |
10 |
40 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT120)
|
0805 |
±5% |
12 |
2.5MHz |
2.8 |
220 |
16 |
37 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT150)
|
0805 |
±5% |
15 |
2.5MHz |
3.8 |
200 |
16 |
30 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JT180)
|
0805 |
±5% |
18 |
2.5MHz |
4.48 |
180 |
16 |
23 |
|
Toevoegen aan lijst |
|---|
Toepassing
MEDISCHE TOEPASSINGEN
Keramische hoge frequentie chipinductoren, kleine maat tot 01005. Dunne film, multilayer, draadgewonden,...
Lees verder
COMMUNICATIE TOEPASSINGEN
Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder