AUTOMOTIEVE TOEPASSINGEN
Dunne film precisieweerstand 0,01%, TC2ppm, draadverbinding, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderFerriet Draadgewonden Inductoren (NL Serie)
0402 / 0603 / 0805 / 1008 / 1210 / 1812 / 2220
Draadgewonden chip ferrietinductor, hoge stroom, gemodelleerd en open type zijn beschikbaar. Kleine afmetingen tot 0603, zeer sterke soldeerbaarheid door doorstroomsolderen of soldeerbout, golfsolderen. Zeer bestand tegen mechanische schokken en druk. Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid. Super Q-eigenschappen.
Kenmerken
- Zeer sterke soldeerbaarheid door doorstroomsolderen, soldeerbout of golfsolderen.
- Zeer nauwkeurige afmetingen, kan automatisch worden gemonteerd.
- Terminals zijn zeer bestand tegen trekkrachten.
- Zeer bestand tegen mechanische schokken en druk.
- Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid Super Q kenmerken.
- Vochtgevoeligheidsniveau 1
Toepassingen
- Micro televisies, vloeibare kristal televisies, videocamera's, draagbare videorecorders, autoradio's, autoradio's, dunne tape radio's, televisietuners, mobiele telefoons, radio's en andere elektronische apparaten.
Constructie
Kleurcodering
0603 / 0805 Type (except NL02 / NL08
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Onderdeelnummering
Standaard Elektrische Specificaties
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.05 | 2000 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R39 | 0.39 | ± 10, ± 20% | 12 | 7.9 | 400 | 0.40 | 500 |
| R47 | 0.47 | ± 10, ± 20% | 12 | 25 | 600 | 0.27 | 700 |
| R56 | 0.56 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R68 | 0.68 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R82 | 0.82 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R90 | 0.90 | ± 10, ± 20% | 20 | 7.9 | 300 | 0.35 | 1400 |
| 1R0 | 1.0 | ± 10, ± 20% | 18 | 7.9 | 230 | 0.62 | 700 |
| 1R2 | 1.2 | ± 10, ± 20% | 18 | 7.9 | 210 | 0.68 | 650 |
| 1R5 | 1.5 | ± 10, ± 20% | 18 | 7.9 | 190 | 0.76 | 630 |
| 1R8 | 1.8 | ± 10, ± 20% | 18 | 7.9 | 170 | 0.84 | 600 |
| 2R0 | 2.0 | ± 10, ± 20% | 18 | 7.9 | 160 | 1.10 | 550 |
| 2R2 | 2.2 | ± 10, ± 20% | 18 | 7.9 | 150 | 1.10 | 520 |
| 2R7 | 2.7 | ± 10, ± 20% | 18 | 7.9 | 135 | 1.28 | 490 |
| 3R3 | 3.3 | ± 10, ± 20% | 18 | 7.9 | 120 | 1.46 | 450 |
| 3R9 | 3.9 | ± 10, ± 20% | 18 | 7.9 | 105 | 2.30 | 300 |
| 4R7 | 4.7 | ± 10, ± 20% | 18 | 7.9 | 90 | 2.00 | 400 |
| 5R6 | 5.6 | ± 10, ± 20% | 15 | 7.9 | 80 | 1.80 | 380 |
| 6R8 | 6.8 | ± 10, ± 20% | 15 | 7.9 | 70 | 2.00 | 360 |
| 8R2 | 8.2 | ± 10, ± 20% | 15 | 7.9 | 65 | 2.65 | 330 |
| 100 | 10 | ± 10, ± 20% | 12 | 2.5 | 60 | 2.95 | 300 |
| 150 | 15 | ± 10, ± 20% | 12 | 2.5 | 30 | 3.70 | 280 |
| 180 | 18 | ± 10, ± 20% | 12 | 2.5 | 26 | 4.00 | 160 |
| 220 | 22 | ± 10, ± 20% | 12 | 2.5 | 22 | 6.14 | 270 |
| 330 | 33 | ± 10, ± 20% | 10 | 2.5 | 12 | 7.00 | 200 |
| 390 | 39 | ± 10, ± 20% | 10 | 2.5 | 16 | 10.00 | 180 |
| 470 | 47 | ± 10, ± 20% | 10 | 2.5 | 10 | 10.70 | 160 |
| 560 | 56 | ± 10, ± 20% | 10 | 2.5 | 8 | 12.00 | 170 |
| 680 | 68 | ± 10, ± 20% | 10 | 2.5 | 6 | 13.50 | 145 |
| 820 | 82 | ± 10, ± 20% | 8 | 2.5 | 6 | 20.00 | 100 |
| 101 | 100 | ± 10, ± 20% | 8 | 1 | 4 | 21.00 | 80 |
Rating DC current: Inductance drop approximately 30% of L0 at Isat.
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Bestanden downloaden
-
- RoHS Rapport
-
-
- BEREIK
| Image | Grootte | Tolerantie | Inductantie | Testconditie | DCR (Ω) max. | IDC (mA) | Q | SRF | Bestanden downloaden | Actie |
Draadgewonden chipinductor (Ferriet) (NL Serie NL05JT220) 
|
0805 |
±5% |
22 |
2.5MHz |
6.3 |
160 |
16 |
20 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL05JT270)
|
0805 |
±5% |
27 |
2.5MHz |
6.85 |
140 |
16 |
19 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL05JT330)
|
0805 |
±5% |
33 |
2.5MHz |
7.6 |
120 |
16 |
18 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL05JT390)
|
0805 |
±5% |
39 |
2.5MHz |
8.2 |
100 |
15 |
16 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KTR39)
|
1008 |
±10% |
0.39 |
7.9MHz |
0.4 |
500 |
12 |
400 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KTR47)
|
1008 |
±10% |
0.47 |
7.9MHz |
0.27 |
700 |
12 |
600 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KTR56)
|
1008 |
±10% |
0.56 |
7.9MHz |
0.62 |
700 |
12 |
230 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KTR68)
|
1008 |
±10% |
0.68 |
7.9MHz |
0.62 |
700 |
12 |
230 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KTR82)
|
1008 |
±10% |
0.82 |
7.9MHz |
0.62 |
700 |
12 |
230 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KTR90)
|
1008 |
±10% |
0.9 |
7.9MHz |
0.35 |
1400 |
20 |
300 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT1R0)
|
1008 |
±10% |
1 |
7.9MHz |
0.62 |
700 |
18 |
230 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT1R2)
|
1008 |
±10% |
1.2 |
7.9MHz |
0.68 |
650 |
18 |
210 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT1R5)
|
1008 |
±10% |
1.5 |
7.9MHz |
0.76 |
630 |
18 |
190 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT1R8)
|
1008 |
±10% |
1.8 |
7.9MHz |
0.84 |
600 |
18 |
170 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT2R0)
|
1008 |
±10% |
2 |
7.9MHz |
1.1 |
550 |
18 |
160 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT2R2)
|
1008 |
±10% |
2.2 |
7.9MHz |
1.1 |
520 |
18 |
150 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT2R7)
|
1008 |
±10% |
2.7 |
7.9MHz |
1.28 |
490 |
18 |
135 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT3R3)
|
1008 |
±10% |
3.3 |
7.9MHz |
1.46 |
450 |
18 |
120 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT3R9)
|
1008 |
±10% |
3.9 |
7.9MHz |
2.3 |
300 |
18 |
105 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT4R7)
|
1008 |
±10% |
4.7 |
7.9MHz |
2 |
400 |
18 |
90 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT5R6)
|
1008 |
±10% |
5.6 |
7.9MHz |
1.8 |
380 |
15 |
80 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT6R8)
|
1008 |
±10% |
6.8 |
7.9MHz |
2 |
360 |
15 |
70 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT8R2)
|
1008 |
±10% |
8.2 |
7.9MHz |
2.65 |
330 |
18 |
65 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT100)
|
1008 |
±10% |
10 |
2.5MHz |
2.95 |
300 |
12 |
60 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT150)
|
1008 |
±10% |
15 |
2.5MHz |
3.7 |
280 |
12 |
30 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT180)
|
1008 |
±10% |
18 |
2.5MHz |
4 |
160 |
12 |
26 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT220)
|
1008 |
±10% |
22 |
2.5MHz |
6.14 |
270 |
12 |
22 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT330)
|
1008 |
±10% |
33 |
2.5MHz |
7 |
200 |
10 |
12 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT390)
|
1008 |
±10% |
39 |
2.5MHz |
10 |
180 |
10 |
16 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT470)
|
1008 |
±10% |
47 |
2.5MHz |
10.7 |
160 |
10 |
10 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT560)
|
1008 |
±10% |
56 |
2.5MHz |
12 |
170 |
10 |
8 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT680)
|
1008 |
±10% |
68 |
2.5MHz |
13.5 |
145 |
10 |
6 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT820)
|
1008 |
±10% |
82 |
2.5MHz |
20 |
100 |
8 |
6 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL08KT101)
|
1008 |
±10% |
100 |
1MHz |
21 |
80 |
8 |
4 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR18)
|
1210 |
±20% |
0.18 |
25.2MHz |
0.28 |
450 |
30 |
685 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR22)
|
1210 |
±20% |
0.22 |
25.2MHz |
0.32 |
450 |
30 |
560 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR27)
|
1210 |
±20% |
0.27 |
25.2MHz |
0.36 |
450 |
30 |
525 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR33)
|
1210 |
±20% |
0.33 |
25.2MHz |
0.4 |
450 |
30 |
520 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR39)
|
1210 |
±20% |
0.39 |
25.2MHz |
0.45 |
450 |
30 |
470 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR47)
|
1210 |
±20% |
0.47 |
25.2MHz |
0.5 |
450 |
30 |
430 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR56)
|
1210 |
±20% |
0.56 |
25.2MHz |
0.55 |
450 |
30 |
395 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR68)
|
1210 |
±20% |
0.68 |
25.2MHz |
0.6 |
450 |
30 |
370 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10MTR82)
|
1210 |
±20% |
0.82 |
25.2MHz |
0.65 |
450 |
30 |
310 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10KT1R0)
|
1210 |
±10% |
1 |
7.96MHz |
0.7 |
400 |
30 |
295 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10KT1R2)
|
1210 |
±10% |
1.2 |
7.96MHz |
0.75 |
390 |
30 |
255 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10KT1R5)
|
1210 |
±10% |
1.5 |
7.96MHz |
0.85 |
370 |
30 |
160 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10KT1R8)
|
1210 |
±10% |
1.8 |
7.96MHz |
0.9 |
350 |
30 |
125 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferriet) (NL Serie NL10KT2R2)
|
1210 |
±10% |
2.2 |
7.96MHz |
1 |
320 |
30 |
100 |
|
Toevoegen aan lijst |
|---|
Toepassing
MEDISCHE TOEPASSINGEN
Keramische hoge frequentie chipinductoren, kleine maat tot 01005. Dunne film, multilayer, draadgewonden,...
Lees verder
COMMUNICATIE TOEPASSINGEN
Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder