REACH-verklaring - SVHC(Hsin Chu).pdf
AUTOMOBIEL TOEPASSINGEN
Dunne film precisie weerstand 0,01%, TC2ppm, draadgebonden, anti-corrosief, MELF. Stroomdetectie, Metaal,...
Lees verderFerrite draadgewonden spoelen (NL-serie)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Draadgewonden chip ferrietinductor, hoge stroom, verkrijgbaar in gegoten en open type. Kleine afmetingen tot 0603, zeer sterke soldeerbaarheid door golfsolderen of soldeerbout, golfsolderen. Zeer bestand tegen mechanische schokken en druk. Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid. Super Q-eigenschappen.
Kenmerken
- Zeer sterke soldeerbaarheid door golfsolderen, soldeerbout of golfsolderen.
- Zeer nauwkeurige afmetingen, kan automatisch worden gemonteerd.
- Terminals zijn zeer bestand tegen trekkrachten.
- Zeer bestand tegen mechanische schokken en druk.
- Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid Super Q-eigenschappen.
- Vochtgevoeligheidsniveau 1 (alleen NL10(C) / NL12(C))
Toepassingen
- Micro-televisies, vloeibare kristaltelevisies, videocamera's, draagbare videorecorders, autoradio's, autoradio's, dunne bandradio's, televisietuners, mobiele telefoons, radio en andere elektronische apparaten.
Constructie
Kleurcodering
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Onderdeelnummering
Standaard elektrische specificaties
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Bestanden Downloaden
-
- RoHS-rapport
-
-
- BEREIK
| Image | Grootte | Tolerantie | Inductie | Testconditie | DCR (Ω) max. | IDC (A) | Q | SRF | Bestanden Downloaden | Actie |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03KTC51N) 
|
0603 |
±10% |
0.051 |
7.96MHz |
0.075 |
1800 |
12 |
1500 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03KTC68N)
|
0603 |
±10% |
0.068 |
7.96MHz |
0.12 |
1800 |
12 |
1500 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03KTC72N)
|
0603 |
±10% |
0.072 |
7.96MHz |
0.12 |
1800 |
12 |
1500 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03KTCR10)
|
0603 |
±10% |
0.1 |
7.96MHz |
0.13 |
1700 |
12 |
1150 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR12)
|
0603 |
±5% |
0.12 |
7.96MHz |
0.15 |
1700 |
12 |
1100 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR15)
|
0603 |
±5% |
0.15 |
7.96MHz |
0.15 |
1600 |
15 |
1050 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR18)
|
0603 |
±5% |
0.18 |
7.96MHz |
0.15 |
1500 |
15 |
950 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR22)
|
0603 |
±5% |
0.22 |
7.96MHz |
0.3 |
1200 |
15 |
900 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR24)
|
0603 |
±5% |
0.24 |
7.96MHz |
0.16 |
1460 |
15 |
850 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR27)
|
0603 |
±5% |
0.27 |
7.96MHz |
0.3 |
1460 |
15 |
835 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR33)
|
0603 |
±5% |
0.33 |
7.96MHz |
0.4 |
1420 |
15 |
725 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR39)
|
0603 |
±5% |
0.39 |
7.96MHz |
0.41 |
1400 |
15 |
680 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR47)
|
0603 |
±5% |
0.47 |
7.96MHz |
0.43 |
1400 |
15 |
640 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR56)
|
0603 |
±5% |
0.56 |
7.96MHz |
0.44 |
1400 |
15 |
630 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR68)
|
0603 |
±5% |
0.68 |
7.96MHz |
0.52 |
1340 |
15 |
510 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR78)
|
0603 |
±5% |
0.78 |
7.96MHz |
0.63 |
1300 |
15 |
465 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTCR82)
|
0603 |
±5% |
0.82 |
7.96MHz |
0.69 |
1200 |
15 |
460 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC1R0)
|
0603 |
±5% |
1 |
7.96MHz |
0.81 |
1100 |
15 |
320 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC1R2)
|
0603 |
±5% |
1.2 |
7.96MHz |
0.87 |
1000 |
15 |
270 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC1R5)
|
0603 |
±5% |
1.5 |
7.96MHz |
0.96 |
920 |
15 |
230 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC1R8)
|
0603 |
±5% |
1.8 |
7.96MHz |
1.1 |
900 |
15 |
210 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC2R2)
|
0603 |
±5% |
2.2 |
7.96MHz |
1.2 |
740 |
15 |
115 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC2R7)
|
0603 |
±5% |
2.7 |
7.96MHz |
1.38 |
700 |
15 |
100 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC3R3)
|
0603 |
±5% |
3.3 |
7.96MHz |
1.5 |
680 |
15 |
84 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC3R9)
|
0603 |
±5% |
3.9 |
7.96MHz |
1.5 |
600 |
15 |
75 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC4R7)
|
0603 |
±5% |
4.7 |
7.96MHz |
2.1 |
580 |
15 |
67 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC5R6)
|
0603 |
±5% |
5.6 |
7.96MHz |
2.37 |
540 |
15 |
55 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC6R8)
|
0603 |
±5% |
6.8 |
7.96MHz |
3.1 |
500 |
15 |
48 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC7R8)
|
0603 |
±5% |
7.8 |
7.96MHz |
3.35 |
460 |
15 |
40 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC8R2)
|
0603 |
±5% |
8.2 |
7.96MHz |
3.5 |
440 |
15 |
38 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03JTC100)
|
0603 |
±5% |
10 |
7.96MHz |
4.46 |
400 |
15 |
32 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTCR47)
|
0805 |
±10% |
0.47 |
25.2MHz |
0.156 |
1400 |
14 |
850 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTCR68)
|
0805 |
±10% |
0.68 |
25.2MHz |
0.195 |
1200 |
14 |
765 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC1R0)
|
0805 |
±10% |
1 |
7.96MHz |
0.169 |
1100 |
14 |
208 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC1R2)
|
0805 |
±10% |
1.2 |
7.96MHz |
0.208 |
960 |
14 |
159 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC1R5)
|
0805 |
±10% |
1.5 |
7.96MHz |
0.221 |
920 |
14 |
159 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC1R8)
|
0805 |
±10% |
1.8 |
7.96MHz |
0.26 |
860 |
14 |
112 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC2R2)
|
0805 |
±10% |
2.2 |
7.96MHz |
0.286 |
740 |
13 |
87 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC2R7)
|
0805 |
±10% |
2.7 |
7.96MHz |
0.325 |
680 |
13 |
72 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC3R3)
|
0805 |
±10% |
3.3 |
7.96MHz |
0.364 |
620 |
12 |
70 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC3R9)
|
0805 |
±10% |
3.9 |
7.96MHz |
0.494 |
580 |
14 |
61 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC4R7)
|
0805 |
±10% |
4.7 |
7.96MHz |
0.559 |
520 |
14 |
51 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC5R6)
|
0805 |
±10% |
5.6 |
7.96MHz |
0.65 |
480 |
12 |
47 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC6R8)
|
0805 |
±10% |
6.8 |
7.96MHz |
0.884 |
420 |
14 |
46 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05KTC8R2)
|
0805 |
±10% |
8.2 |
7.96MHz |
0.949 |
400 |
13 |
33 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTC100)
|
0805 |
±5% |
10 |
2.52MHz |
1.105 |
360 |
14 |
31 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTC120)
|
0805 |
±5% |
12 |
2.52MHz |
1.17 |
340 |
14 |
30 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTC150)
|
0805 |
±5% |
15 |
2.52MHz |
1.82 |
300 |
15 |
28 |
|
Toevoegen aan lijst |
|---|
Toepassing
MEDISCHE TOEPASSINGEN
Keramische hoogfrequente chip spoelen, klein formaat tot 01005. Dunne film, meerlaags, draadgewonden,...
Lees verder
COMMUNICATIE TOEPASSINGEN
Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder