REACH-verklaring - SVHC(Hsin Chu).pdf
AUTOMOBIEL TOEPASSINGEN
Dunne film precisie weerstand 0,01%, TC2ppm, draadgebonden, anti-corrosief, MELF. Stroomdetectie, Metaal,...
Lees verderFerrite draadgewonden spoelen (NL-serie)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Draadgewonden chip ferrietinductor, hoge stroom, verkrijgbaar in gegoten en open type. Kleine afmetingen tot 0603, zeer sterke soldeerbaarheid door golfsolderen of soldeerbout, golfsolderen. Zeer bestand tegen mechanische schokken en druk. Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid. Super Q-eigenschappen.
Kenmerken
- Zeer sterke soldeerbaarheid door golfsolderen, soldeerbout of golfsolderen.
- Zeer nauwkeurige afmetingen, kan automatisch worden gemonteerd.
- Terminals zijn zeer bestand tegen trekkrachten.
- Zeer bestand tegen mechanische schokken en druk.
- Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid Super Q-eigenschappen.
- Vochtgevoeligheidsniveau 1 (alleen NL10(C) / NL12(C))
Toepassingen
- Micro-televisies, vloeibare kristaltelevisies, videocamera's, draagbare videorecorders, autoradio's, autoradio's, dunne bandradio's, televisietuners, mobiele telefoons, radio en andere elektronische apparaten.
Constructie
Kleurcodering
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Onderdeelnummering
Standaard elektrische specificaties
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Bestanden Downloaden
-
- RoHS-rapport
-
-
- BEREIK
| Image | Grootte | Tolerantie | Inductie | Testconditie | DCR (Ω) max. | IDC (A) | Q | SRF | Bestanden Downloaden | Actie |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT4R7) 
|
1812 |
±10% |
4.7 |
7.96MHz |
1 |
315 |
50 |
35 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT5R6)
|
1812 |
±10% |
5.6 |
7.96MHz |
1.1 |
300 |
50 |
33 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT6R8)
|
1812 |
±10% |
6.8 |
7.96MHz |
1.2 |
285 |
50 |
27 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT8R2)
|
1812 |
±10% |
8.2 |
7.96MHz |
1.4 |
270 |
50 |
25 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT100)
|
1812 |
±10% |
10 |
2.52MHz |
1.6 |
250 |
50 |
20 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT120)
|
1812 |
±10% |
12 |
2.52MHz |
2 |
225 |
50 |
18 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT150)
|
1812 |
±10% |
15 |
2.52MHz |
2.5 |
200 |
50 |
17 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT180)
|
1812 |
±10% |
18 |
2.52MHz |
2.8 |
190 |
50 |
15 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT220)
|
1812 |
±10% |
22 |
2.52MHz |
3.2 |
180 |
50 |
13 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT270)
|
1812 |
±10% |
27 |
2.52MHz |
3.6 |
170 |
50 |
12 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT330)
|
1812 |
±10% |
33 |
2.52MHz |
4 |
160 |
50 |
11 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT390)
|
1812 |
±10% |
39 |
2.52MHz |
4.5 |
150 |
50 |
10 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT470)
|
1812 |
±10% |
47 |
2.52MHz |
5 |
140 |
50 |
10 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT560)
|
1812 |
±10% |
56 |
2.52MHz |
5.5 |
135 |
50 |
9 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT680)
|
1812 |
±10% |
68 |
2.52MHz |
6 |
130 |
50 |
9 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT820)
|
1812 |
±10% |
82 |
2.52MHz |
7 |
120 |
50 |
8 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT101)
|
1812 |
±10% |
100 |
0.796MHz |
8 |
110 |
40 |
8 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT121)
|
1812 |
±10% |
120 |
0.796MHz |
8 |
110 |
40 |
6 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT151)
|
1812 |
±10% |
150 |
0.796MHz |
9 |
105 |
40 |
5 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT181)
|
1812 |
±10% |
180 |
0.796MHz |
9.5 |
102 |
40 |
5 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT221)
|
1812 |
±10% |
220 |
0.796MHz |
10 |
100 |
40 |
4 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT271)
|
1812 |
±10% |
270 |
0.796MHz |
15 |
92 |
30 |
4 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT331)
|
1812 |
±10% |
330 |
0.796MHz |
15 |
85 |
30 |
3.5 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT391)
|
1812 |
±10% |
390 |
0.796MHz |
18 |
80 |
30 |
3 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT471)
|
1812 |
±10% |
470 |
0.796MHz |
26 |
62 |
30 |
3 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT561)
|
1812 |
±10% |
560 |
0.796MHz |
30 |
50 |
30 |
3 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT681)
|
1812 |
±10% |
680 |
0.796MHz |
30 |
50 |
30 |
3 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12KT821)
|
1812 |
±10% |
820 |
0.796MHz |
43 |
30 |
30 |
2.5 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT122)
|
1812 |
±5% |
1.2 |
20MHz |
17 |
75 |
0.252 |
1.5 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT152)
|
1812 |
±5% |
1.5 |
20MHz |
20 |
70 |
0.252 |
1.4 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT182)
|
1812 |
±5% |
1.8 |
20MHz |
30 |
60 |
0.252 |
1.3 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT222)
|
1812 |
±5% |
2.2 |
20MHz |
35 |
55 |
0.252 |
1.2 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT272)
|
1812 |
±5% |
2.7 |
20MHz |
55 |
45 |
0.252 |
1.1 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT332)
|
1812 |
±5% |
3.3 |
20MHz |
60 |
40 |
0.252 |
1 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT392)
|
1812 |
±5% |
3.9 |
20MHz |
70 |
38 |
0.252 |
1 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT472)
|
1812 |
±5% |
4.7 |
20MHz |
78 |
36 |
0.252 |
0.9 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT562)
|
1812 |
±5% |
5.6 |
20MHz |
85 |
33 |
0.252 |
0.8 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT682)
|
1812 |
±5% |
6.8 |
20MHz |
110 |
30 |
0.252 |
0.7 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT822)
|
1812 |
±5% |
8.2 |
20MHz |
125 |
28 |
0.252 |
0.6 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL12JT103)
|
1812 |
±5% |
10 |
15MHz |
150 |
25 |
0.0796 |
0.5 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTL1R0)
|
0805 |
±5% |
1 |
7.96MHz |
0.9 |
450 |
15 |
115 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTL3R3)
|
0805 |
±5% |
3.3 |
7.96MHz |
1.4 |
450 |
13 |
70 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTL4R7)
|
0805 |
±5% |
4.7 |
7.96MHz |
1.9 |
400 |
15 |
65 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTL6R8)
|
0805 |
±5% |
6.8 |
7.96MHz |
2.4 |
400 |
15 |
41 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTL100)
|
0805 |
±5% |
10 |
7.96MHz |
2.7 |
400 |
14 |
31 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTL150)
|
0805 |
±5% |
15 |
7.96MHz |
5 |
300 |
12 |
28 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL05JTL220)
|
0805 |
±5% |
22 |
7.96MHz |
6 |
250 |
10 |
25 |
|
Toevoegen aan lijst |
Draadgewonden chipinductor (Ferrite) (NL-serie NL03KTC47N)
|
0603 |
±10% |
0.047 |
7.96MHz |
0.075 |
1800 |
12 |
2000 |
|
Toevoegen aan lijst |
|---|
Toepassing
MEDISCHE TOEPASSINGEN
Keramische hoogfrequente chip spoelen, klein formaat tot 01005. Dunne film, meerlaags, draadgewonden,...
Lees verder
COMMUNICATIE TOEPASSINGEN
Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder