AUTOMOTIEVE TOEPASSINGEN
Dunne film precisieweerstand 0,01%, TC2ppm, draadverbinding, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderFerrite draadgewonden spoelen (NL-serie)
0402 / 0603 / 0805 / 1008 / 1210 / 1812 / 2220
Draadgewonden chip ferrietinductor, hoge stroom, verkrijgbaar in gegoten en open type. Kleine afmetingen tot 0603, zeer sterke soldeerbaarheid door golfsolderen of soldeerbout, golfsolderen. Zeer bestand tegen mechanische schokken en druk. Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid. Super Q-eigenschappen.
Kenmerken
- Zeer sterke soldeerbaarheid door doorstroomsolderen, soldeerbout of golfsolderen.
- Zeer nauwkeurige afmetingen, kan automatisch worden gemonteerd.
- Terminals zijn zeer bestand tegen trekkrachten.
- Zeer bestand tegen mechanische schokken en druk.
- Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid Super Q kenmerken.
- Vochtgevoeligheidsniveau 1
Toepassingen
- Micro televisies, vloeibare kristal televisies, videocamera's, draagbare videorecorders, autoradio's, autoradio's, dunne tape radio's, televisietuners, mobiele telefoons, radio's en andere elektronische apparaten.
Constructie
Kleurcodering
0603 / 0805 Type (except NL02 / NL08
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Onderdeelnummering
Standaard elektrische specificaties
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.05 | 2000 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R39 | 0.39 | ± 10, ± 20% | 12 | 7.9 | 400 | 0.40 | 500 |
| R47 | 0.47 | ± 10, ± 20% | 12 | 25 | 600 | 0.27 | 700 |
| R56 | 0.56 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R68 | 0.68 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R82 | 0.82 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R90 | 0.90 | ± 10, ± 20% | 20 | 7.9 | 300 | 0.35 | 1400 |
| 1R0 | 1.0 | ± 10, ± 20% | 18 | 7.9 | 230 | 0.62 | 700 |
| 1R2 | 1.2 | ± 10, ± 20% | 18 | 7.9 | 210 | 0.68 | 650 |
| 1R5 | 1.5 | ± 10, ± 20% | 18 | 7.9 | 190 | 0.76 | 630 |
| 1R8 | 1.8 | ± 10, ± 20% | 18 | 7.9 | 170 | 0.84 | 600 |
| 2R0 | 2.0 | ± 10, ± 20% | 18 | 7.9 | 160 | 1.10 | 550 |
| 2R2 | 2.2 | ± 10, ± 20% | 18 | 7.9 | 150 | 1.10 | 520 |
| 2R7 | 2.7 | ± 10, ± 20% | 18 | 7.9 | 135 | 1.28 | 490 |
| 3R3 | 3.3 | ± 10, ± 20% | 18 | 7.9 | 120 | 1.46 | 450 |
| 3R9 | 3.9 | ± 10, ± 20% | 18 | 7.9 | 105 | 2.30 | 300 |
| 4R7 | 4.7 | ± 10, ± 20% | 18 | 7.9 | 90 | 2.00 | 400 |
| 5R6 | 5.6 | ± 10, ± 20% | 15 | 7.9 | 80 | 1.80 | 380 |
| 6R8 | 6.8 | ± 10, ± 20% | 15 | 7.9 | 70 | 2.00 | 360 |
| 8R2 | 8.2 | ± 10, ± 20% | 15 | 7.9 | 65 | 2.65 | 330 |
| 100 | 10 | ± 10, ± 20% | 12 | 2.5 | 60 | 2.95 | 300 |
| 150 | 15 | ± 10, ± 20% | 12 | 2.5 | 30 | 3.70 | 280 |
| 180 | 18 | ± 10, ± 20% | 12 | 2.5 | 26 | 4.00 | 160 |
| 220 | 22 | ± 10, ± 20% | 12 | 2.5 | 22 | 6.14 | 270 |
| 330 | 33 | ± 10, ± 20% | 10 | 2.5 | 12 | 7.00 | 200 |
| 390 | 39 | ± 10, ± 20% | 10 | 2.5 | 16 | 10.00 | 180 |
| 470 | 47 | ± 10, ± 20% | 10 | 2.5 | 10 | 10.70 | 160 |
| 560 | 56 | ± 10, ± 20% | 10 | 2.5 | 8 | 12.00 | 170 |
| 680 | 68 | ± 10, ± 20% | 10 | 2.5 | 6 | 13.50 | 145 |
| 820 | 82 | ± 10, ± 20% | 8 | 2.5 | 6 | 20.00 | 100 |
| 101 | 100 | ± 10, ± 20% | 8 | 1 | 4 | 21.00 | 80 |
Rating DC current: Inductance drop approximately 30% of L0 at Isat.
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Bestanden downloaden
-
- RoHS Rapport
-
-
- BEREIK
| Image | Grootte | Tolerantie | Inductantie | Testconditie | DCR (Ω) max. | IDC (mA) | Q | SRF | Bestanden downloaden | Actie |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT2R7) 
|
1210 |
±10% |
2.7 |
7.96MHz |
1.1 |
290 |
30 |
65 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT3R3)
|
1210 |
±10% |
3.3 |
7.96MHz |
1.2 |
260 |
30 |
55 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT3R9)
|
1210 |
±10% |
3.9 |
7.96MHz |
1.3 |
250 |
30 |
50 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT4R7)
|
1210 |
±10% |
4.7 |
7.96MHz |
1.5 |
220 |
30 |
45 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT5R6)
|
1210 |
±10% |
5.6 |
7.96MHz |
1.6 |
200 |
30 |
40 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT6R8)
|
1210 |
±10% |
6.8 |
7.96MHz |
1.8 |
180 |
30 |
35 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT8R2)
|
1210 |
±10% |
8.2 |
7.96MHz |
2 |
170 |
30 |
30 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT100)
|
1210 |
±10% |
10 |
2.52MHz |
2.1 |
150 |
30 |
30 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT120)
|
1210 |
±10% |
12 |
2.52MHz |
2.5 |
140 |
30 |
28 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT150)
|
1210 |
±10% |
15 |
2.52MHz |
2.8 |
130 |
30 |
25 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT180)
|
1210 |
±10% |
18 |
2.52MHz |
3.3 |
120 |
30 |
22 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT220)
|
1210 |
±10% |
22 |
2.52MHz |
3.7 |
110 |
30 |
19 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT270)
|
1210 |
±10% |
27 |
2.52MHz |
5 |
80 |
30 |
18 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT330)
|
1210 |
±10% |
33 |
2.52MHz |
5.6 |
70 |
30 |
17 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT390)
|
1210 |
±10% |
39 |
2.52MHz |
6.4 |
65 |
30 |
15 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT470)
|
1210 |
±10% |
47 |
2.52MHz |
7 |
60 |
30 |
14 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT560)
|
1210 |
±10% |
56 |
2.52MHz |
8 |
55 |
30 |
13 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT680)
|
1210 |
±10% |
68 |
2.52MHz |
9 |
50 |
30 |
11 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT820)
|
1210 |
±10% |
82 |
2.52MHz |
10 |
45 |
30 |
10 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT101)
|
1210 |
±10% |
100 |
0.796MHz |
11 |
40 |
20 |
9 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT121)
|
1210 |
±10% |
120 |
0.796MHz |
11 |
70 |
20 |
8 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KT151)
|
1210 |
±10% |
150 |
0.796MHz |
15 |
65 |
20 |
7 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR18)
|
1812 |
±20% |
0.18 |
25.2MHz |
0.24 |
700 |
35 |
570 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR22)
|
1812 |
±20% |
0.22 |
25.2MHz |
0.25 |
665 |
40 |
505 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR27)
|
1812 |
±20% |
0.27 |
25.2MHz |
0.26 |
635 |
40 |
450 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR33)
|
1812 |
±20% |
0.33 |
25.2MHz |
0.28 |
605 |
40 |
425 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR39)
|
1812 |
±20% |
0.39 |
25.2MHz |
0.3 |
575 |
40 |
390 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR47)
|
1812 |
±20% |
0.47 |
25.2MHz |
0.32 |
545 |
40 |
350 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR56)
|
1812 |
±20% |
0.56 |
25.2MHz |
0.36 |
520 |
40 |
325 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR68)
|
1812 |
±20% |
0.68 |
25.2MHz |
0.4 |
500 |
40 |
300 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12MTR82)
|
1812 |
±20% |
0.82 |
25.2MHz |
0.45 |
475 |
40 |
275 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT1R0)
|
1812 |
±10% |
1 |
7.96MHz |
0.5 |
450 |
50 |
250 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT1R2)
|
1812 |
±10% |
1.2 |
7.96MHz |
0.55 |
430 |
50 |
240 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT1R5)
|
1812 |
±10% |
1.5 |
7.96MHz |
0.6 |
410 |
50 |
210 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT1R8)
|
1812 |
±10% |
1.8 |
7.96MHz |
0.65 |
390 |
50 |
190 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT2R2)
|
1812 |
±10% |
2.2 |
7.96MHz |
0.7 |
380 |
50 |
160 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT2R7)
|
1812 |
±10% |
2.7 |
7.96MHz |
0.75 |
370 |
50 |
150 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT3R3)
|
1812 |
±10% |
3.3 |
7.96MHz |
0.8 |
355 |
50 |
110 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT3R9)
|
1812 |
±10% |
3.9 |
7.96MHz |
0.9 |
330 |
50 |
100 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT4R7)
|
1812 |
±10% |
4.7 |
7.96MHz |
1 |
315 |
50 |
80 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT5R6)
|
1812 |
±10% |
5.6 |
7.96MHz |
1.1 |
300 |
50 |
50 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT6R8)
|
1812 |
±10% |
6.8 |
7.96MHz |
1.2 |
285 |
50 |
35 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT8R2)
|
1812 |
±10% |
8.2 |
7.96MHz |
1.4 |
270 |
50 |
28 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT100)
|
1812 |
±10% |
10 |
2.52MHz |
1.6 |
250 |
50 |
22 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT120)
|
1812 |
±10% |
12 |
2.52MHz |
2 |
225 |
50 |
20 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT150)
|
1812 |
±10% |
15 |
2.52MHz |
2.5 |
200 |
50 |
18 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT180)
|
1812 |
±10% |
18 |
2.52MHz |
2.8 |
190 |
50 |
16 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KT220)
|
1812 |
±10% |
22 |
2.52MHz |
3.2 |
180 |
50 |
14 |
|
Toevoegen aan lijst |
|---|
Toepassing
MEDISCHE TOEPASSINGEN
Keramische hoge frequentie chipinductoren, kleine maat tot 01005. Dunne film, multilayer, draadgewonden,...
Lees verder
COMMUNICATIE TOEPASSINGEN
Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder