REACH-Erklärung - SVHC(Hsin Chu).pdf
AUTOMOBILANWENDUNGEN
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondable, Antikorrosiv, MELF. Stromsensoren, Metall,...
WeiterlesenFerrit-Drahtgewickelte Induktoren (NL-Serie)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Drahtgewickelte Chip-Ferritinduktoren, hoher Strom, in gegossener und offener Bauform erhältlich. Kleine Größe bis 0603, sehr gute Lötfähigkeit durch Wellenlöten oder Lötkolben, Wellenlöten. Hochbeständig gegen mechanische Stöße und Druck. Hochzuverlässig in Umgebungen mit plötzlichen Temperaturänderungen und Feuchtigkeit. Super Q-Eigenschaften.
Funktionen
- Sehr starke Lötfähigkeit durch Wellenlöten, Lötkolben oder Wellenlöten.
- Hochpräzise Abmessungen, können automatisch montiert werden.
- Die Anschlüsse sind äußerst widerstandsfähig gegen Zugkräfte.
- Sehr widerstandsfähig gegen mechanische Stöße und Druck.
- Hochzuverlässig in Umgebungen mit plötzlichen Temperaturänderungen und Feuchtigkeit, Super-Q-Eigenschaften.
- Feuchtigkeitsempfindlichkeitsstufe 1 (nur NL10(C) / NL12(C))
Anwendungen
- Mikrofernseher, Flüssigkristallfernseher, Videokameras, tragbare Videorekorder, Autoradios, Autoradios, Dünnschichtradios, Fernsehtuner, Mobiltelefone, Radio und andere elektronische Geräte.
Konstruktion
Farbcodierung
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Teilenummerierung
Standard-Elektrische Spezifikationen
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Dateien herunterladen
-
- RoHS-Bericht
-
-
- ERREICHEN
| Image | Größe | Toleranz | Induktivität | Testbedingung | DCR (Ω) max. | IDC (A) | Q | SRF | Dateien herunterladen | Aktion |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL05JT220) 
|
0805 |
±5% |
22 |
2.52MHz |
6.3 |
160 |
16 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL05JT270)
|
0805 |
±5% |
27 |
2.52MHz |
6.85 |
140 |
16 |
19 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL05JT330)
|
0805 |
±5% |
33 |
2.52MHz |
7.6 |
120 |
16 |
18 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL05JT390)
|
0805 |
±5% |
39 |
2.52MHz |
8.2 |
100 |
15 |
16 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR12)
|
1008 |
±5% |
0.12 |
25.2MHz |
0.3 |
1000 |
26 |
800 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR18)
|
1008 |
±5% |
0.18 |
25.2MHz |
0.3 |
960 |
30 |
600 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR20)
|
1008 |
±5% |
0.2 |
25.2MHz |
0.3 |
960 |
30 |
735 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR22)
|
1008 |
±5% |
0.22 |
25.2MHz |
0.4 |
880 |
27 |
600 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR27)
|
1008 |
±5% |
0.27 |
25.2MHz |
0.42 |
900 |
29 |
425 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR33)
|
1008 |
±5% |
0.33 |
25.2MHz |
0.42 |
900 |
30 |
400 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR39)
|
1008 |
±5% |
0.39 |
25.2MHz |
0.45 |
700 |
30 |
375 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR47)
|
1008 |
±5% |
0.47 |
25.2MHz |
0.5 |
900 |
30 |
350 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR56)
|
1008 |
±5% |
0.56 |
25.2MHz |
0.55 |
850 |
30 |
325 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR62)
|
1008 |
±5% |
0.62 |
25.2MHz |
0.55 |
900 |
30 |
460 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR68)
|
1008 |
±5% |
0.68 |
25.2MHz |
0.55 |
800 |
30 |
300 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR75)
|
1008 |
±5% |
0.75 |
25.2MHz |
0.65 |
880 |
30 |
420 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR82)
|
1008 |
±5% |
0.82 |
25.2MHz |
0.65 |
700 |
30 |
260 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JTR91)
|
1008 |
±5% |
0.91 |
25.2MHz |
0.65 |
840 |
30 |
400 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT1R0)
|
1008 |
±5% |
1 |
7.96MHz |
0.6 |
600 |
25 |
245 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT1R2)
|
1008 |
±5% |
1.2 |
7.96MHz |
0.74 |
600 |
25 |
230 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT1R5)
|
1008 |
±5% |
1.5 |
7.96MHz |
0.85 |
550 |
25 |
182 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT1R8)
|
1008 |
±5% |
1.8 |
7.96MHz |
0.92 |
500 |
25 |
135 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT2R2)
|
1008 |
±5% |
2.2 |
7.96MHz |
1.1 |
500 |
25 |
105 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT2R7)
|
1008 |
±5% |
2.7 |
7.96MHz |
1.22 |
350 |
25 |
70 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT3R3)
|
1008 |
±5% |
3.3 |
7.96MHz |
1.37 |
350 |
25 |
55 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT3R9)
|
1008 |
±5% |
3.9 |
7.96MHz |
1.66 |
310 |
25 |
48 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT4R7)
|
1008 |
±5% |
4.7 |
7.96MHz |
1.68 |
300 |
25 |
43 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT5R6)
|
1008 |
±5% |
5.6 |
7.96MHz |
1.75 |
300 |
25 |
42 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT6R8)
|
1008 |
±5% |
6.8 |
7.96MHz |
1.85 |
300 |
25 |
39 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT8R2)
|
1008 |
±5% |
8.2 |
7.96MHz |
2 |
250 |
25 |
36 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT100)
|
1008 |
±5% |
10 |
2.52MHz |
2.32 |
250 |
20 |
33 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT120)
|
1008 |
±5% |
12 |
2.52MHz |
2.99 |
200 |
15 |
28 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT150)
|
1008 |
±5% |
15 |
2.52MHz |
3.42 |
200 |
15 |
24 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT180)
|
1008 |
±5% |
18 |
2.52MHz |
4.65 |
180 |
15 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT220)
|
1008 |
±5% |
22 |
2.52MHz |
5.12 |
180 |
15 |
18 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT270)
|
1008 |
±5% |
27 |
2.52MHz |
5.76 |
160 |
15 |
17 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT330)
|
1008 |
±5% |
33 |
2.52MHz |
6.44 |
120 |
15 |
16 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT390)
|
1008 |
±5% |
39 |
2.52MHz |
6.85 |
120 |
15 |
15 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT470)
|
1008 |
±5% |
47 |
2.52MHz |
9.94 |
110 |
14 |
13 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT560)
|
1008 |
±5% |
56 |
2.52MHz |
10.7 |
90 |
14 |
10 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT680)
|
1008 |
±5% |
68 |
2.52MHz |
12.8 |
90 |
14 |
8 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT820)
|
1008 |
±5% |
82 |
2.52MHz |
18.3 |
80 |
14 |
8 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL08JT101)
|
1008 |
±5% |
100 |
1MHz |
19.6 |
120 |
8 |
7 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR18)
|
1210 |
±20% |
0.18 |
25.2MHz |
0.28 |
450 |
30 |
400 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR22)
|
1210 |
±20% |
0.22 |
25.2MHz |
0.32 |
450 |
30 |
350 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR27)
|
1210 |
±20% |
0.27 |
25.2MHz |
0.36 |
450 |
30 |
320 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR33)
|
1210 |
±20% |
0.33 |
25.2MHz |
0.4 |
450 |
30 |
300 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR39)
|
1210 |
±20% |
0.39 |
25.2MHz |
0.45 |
450 |
30 |
250 |
|
Zur Liste hinzufügen |
|---|
Anwendung
MEDIZINISCHE ANWENDUNGEN
Keramische Hochfrequenz-Chip-Induktoren, klein bis 01005. Dünnschicht-, Mehrschicht-, Drahtgewickelte-,...
Weiterlesen
KOMMUNIKATIONSANWENDUNGEN
Mehrschicht-Keramikkondensator bietet hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Güte, niedrige...
Weiterlesen