REACH-Erklärung - SVHC(Hsin Chu).pdf
AUTOMOBILANWENDUNGEN
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondable, Antikorrosiv, MELF. Stromsensoren, Metall,...
WeiterlesenFerrit-Drahtgewickelte Induktoren (NL-Serie)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Drahtgewickelte Chip-Ferritinduktoren, hoher Strom, in gegossener und offener Bauform erhältlich. Kleine Größe bis 0603, sehr gute Lötfähigkeit durch Wellenlöten oder Lötkolben, Wellenlöten. Hochbeständig gegen mechanische Stöße und Druck. Hochzuverlässig in Umgebungen mit plötzlichen Temperaturänderungen und Feuchtigkeit. Super Q-Eigenschaften.
Funktionen
- Sehr starke Lötfähigkeit durch Wellenlöten, Lötkolben oder Wellenlöten.
- Hochpräzise Abmessungen, können automatisch montiert werden.
- Die Anschlüsse sind äußerst widerstandsfähig gegen Zugkräfte.
- Sehr widerstandsfähig gegen mechanische Stöße und Druck.
- Hochzuverlässig in Umgebungen mit plötzlichen Temperaturänderungen und Feuchtigkeit, Super-Q-Eigenschaften.
- Feuchtigkeitsempfindlichkeitsstufe 1 (nur NL10(C) / NL12(C))
Anwendungen
- Mikrofernseher, Flüssigkristallfernseher, Videokameras, tragbare Videorekorder, Autoradios, Autoradios, Dünnschichtradios, Fernsehtuner, Mobiltelefone, Radio und andere elektronische Geräte.
Konstruktion
Farbcodierung
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Teilenummerierung
Standard-Elektrische Spezifikationen
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Dateien herunterladen
-
- RoHS-Bericht
-
-
- ERREICHEN
| Image | Größe | Toleranz | Induktivität | Testbedingung | DCR (Ω) max. | IDC (A) | Q | SRF | Dateien herunterladen | Aktion |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR47) 
|
1210 |
±20% |
0.47 |
25.2MHz |
0.5 |
450 |
30 |
220 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR56)
|
1210 |
±20% |
0.56 |
25.2MHz |
0.55 |
450 |
30 |
180 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR68)
|
1210 |
±20% |
0.68 |
25.2MHz |
0.6 |
450 |
30 |
160 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10MTR82)
|
1210 |
±20% |
0.82 |
25.2MHz |
0.65 |
450 |
30 |
140 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT1R0)
|
1210 |
±10% |
1 |
7.96MHz |
0.7 |
400 |
30 |
120 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT1R2)
|
1210 |
±10% |
1.2 |
7.96MHz |
0.75 |
390 |
30 |
100 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT1R5)
|
1210 |
±10% |
1.5 |
7.96MHz |
0.85 |
370 |
30 |
85 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT1R8)
|
1210 |
±10% |
1.8 |
7.96MHz |
0.9 |
350 |
30 |
80 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT2R2)
|
1210 |
±10% |
2.2 |
7.96MHz |
1 |
320 |
30 |
75 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT2R7)
|
1210 |
±10% |
2.7 |
7.96MHz |
1.1 |
290 |
30 |
70 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT3R3)
|
1210 |
±10% |
3.3 |
7.96MHz |
1.2 |
260 |
30 |
60 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT3R9)
|
1210 |
±10% |
3.9 |
7.96MHz |
1.3 |
250 |
30 |
55 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT4R7)
|
1210 |
±10% |
4.7 |
7.96MHz |
1.5 |
220 |
30 |
50 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT5R6)
|
1210 |
±10% |
5.6 |
7.96MHz |
1.6 |
200 |
30 |
45 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT6R8)
|
1210 |
±10% |
6.8 |
7.96MHz |
1.8 |
180 |
30 |
40 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT8R2)
|
1210 |
±10% |
8.2 |
7.96MHz |
2 |
170 |
30 |
35 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT100)
|
1210 |
±10% |
10 |
2.52MHz |
2.1 |
150 |
30 |
30 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT120)
|
1210 |
±10% |
12 |
2.52MHz |
2.5 |
140 |
30 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT150)
|
1210 |
±10% |
15 |
2.52MHz |
2.8 |
130 |
30 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT180)
|
1210 |
±10% |
18 |
2.52MHz |
3.3 |
120 |
30 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT220)
|
1210 |
±10% |
22 |
2.52MHz |
3.7 |
110 |
30 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT270)
|
1210 |
±10% |
27 |
2.52MHz |
5 |
80 |
30 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT330)
|
1210 |
±10% |
33 |
2.52MHz |
5.6 |
70 |
30 |
17 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT390)
|
1210 |
±10% |
39 |
2.52MHz |
6.4 |
65 |
30 |
16 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT470)
|
1210 |
±10% |
47 |
2.52MHz |
7 |
60 |
30 |
15 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT560)
|
1210 |
±10% |
56 |
2.52MHz |
8 |
55 |
30 |
13 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT680)
|
1210 |
±10% |
68 |
2.52MHz |
9 |
50 |
30 |
12 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT820)
|
1210 |
±10% |
82 |
2.52MHz |
10 |
45 |
30 |
11 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT101)
|
1210 |
±10% |
100 |
0.796MHz |
10 |
40 |
20 |
10 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT121)
|
1210 |
±10% |
120 |
0.796MHz |
11 |
70 |
20 |
10 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL10KT151)
|
1210 |
±10% |
150 |
0.796MHz |
15 |
65 |
20 |
8 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR18)
|
1812 |
±20% |
0.18 |
25.2MHz |
0.24 |
700 |
30 |
220 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR22)
|
1812 |
±20% |
0.22 |
25.2MHz |
0.25 |
665 |
30 |
200 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR27)
|
1812 |
±20% |
0.27 |
25.2MHz |
0.26 |
635 |
30 |
180 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR33)
|
1812 |
±20% |
0.33 |
25.2MHz |
0.28 |
605 |
30 |
165 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR39)
|
1812 |
±20% |
0.39 |
25.2MHz |
0.3 |
575 |
30 |
150 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR47)
|
1812 |
±20% |
0.47 |
25.2MHz |
0.32 |
545 |
30 |
145 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR56)
|
1812 |
±20% |
0.56 |
25.2MHz |
0.36 |
520 |
30 |
140 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR68)
|
1812 |
±20% |
0.68 |
25.2MHz |
0.4 |
500 |
30 |
135 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12MTR82)
|
1812 |
±20% |
0.82 |
25.2MHz |
0.45 |
475 |
30 |
130 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT1R0)
|
1812 |
±10% |
1 |
7.96MHz |
0.5 |
450 |
50 |
100 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT1R2)
|
1812 |
±10% |
1.2 |
7.96MHz |
0.55 |
430 |
50 |
80 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT1R5)
|
1812 |
±10% |
1.5 |
7.96MHz |
0.6 |
410 |
50 |
70 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT1R8)
|
1812 |
±10% |
1.8 |
7.96MHz |
0.65 |
390 |
50 |
60 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT2R2)
|
1812 |
±10% |
2.2 |
7.96MHz |
0.7 |
380 |
50 |
55 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT2R7)
|
1812 |
±10% |
2.7 |
7.96MHz |
0.75 |
370 |
50 |
50 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT3R3)
|
1812 |
±10% |
3.3 |
7.96MHz |
0.8 |
355 |
50 |
45 |
|
Zur Liste hinzufügen |
Drahtgewickelte Chip-Induktivität (Ferrit) (NL-Serie NL12KT3R9)
|
1812 |
±10% |
3.9 |
7.96MHz |
0.9 |
330 |
50 |
40 |
|
Zur Liste hinzufügen |
|---|
Anwendung
MEDIZINISCHE ANWENDUNGEN
Keramische Hochfrequenz-Chip-Induktoren, klein bis 01005. Dünnschicht-, Mehrschicht-, Drahtgewickelte-,...
Weiterlesen
KOMMUNIKATIONSANWENDUNGEN
Mehrschicht-Keramikkondensator bietet hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Güte, niedrige...
Weiterlesen