Resistor
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreTO-263 SMD Power Resistors (STR35 Series STR35FBE0300)
STR35FBE0300
SMD high power resistor upto 35W, thick film with packaged TO263. applicaions are switching power supply and snubbers circuit, automated machine controller, RF power amplifier, low energy pulse loading , UPS, voltage regulation , bleeder resistor.
STR35 Series±1% 100 35W Series30Ω TO220
| Tolerance | TCR (ppm /℃) | Power | Resistance (Ohm) | Package |
|---|---|---|---|---|
| ±1% | 100 | 35W | 30 | TO220 |
Electrical Characteristics Specifications
| Item Type |
Resistance Range | TCR (PPM/°C) | |||
|---|---|---|---|---|---|
| ±0.5% | ±1% | ±5% | ±10% | ||
| STR35 | --- | --- | 0.5Ω –0.91Ω | No Specified | |
| --- | 1Ω –2.7Ω | ±100 ±300 |
|||
| --- | 3Ω -10Ω | ±100 ±200 |
|||
| >10Ω –100KΩ | ±50 ±100 ±200 |
||||
☑ Dielectric Strength: 2000VAC
☑ Insulation Resistance: 10GΩ min.
☑ Working Temperature Range: -55°C to +175°C
☑ Resistance Value < 1Ω is available
Environmental Characteristics
| Item | Requirement | Test Method |
|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) |
As Spec. | JIS-C-5201-1 4.8 IEC 60115-1 4.8 Referenced to 25°C, DR taken at +105°C |
| Short Time Overload | DR±0.3% | JIS-C-5201-1 4.13 IEC 60115-1 4.13 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds |
| Load Life | DR±1.0% | JIS-C-5201-1 4.25 IEC 60115-1 4.25 2,000 hours at rated power |
| High Temperature Exposure | DR±0.25% | MIL-STD-202 method 108 at +175°C for 1000 hrs. Unpowered. |
| Temperature Cycling | DR±0.3% | JESD22 Method JA-104 -55°C~+175°C, 1000 cycles |
| Damp Heat with Load | DR±0.5% | JIS-C-5201-1 4.24 IEC 60115-1 4.24 40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF” |
| Vibration, High Frequency | DR±0.2% | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
| Resistance to Soldering Heat | ΔR±0.5% | JIS-C-5201-1 4.18 IEC 60115-1 4.18 260±5°C for 10 seconds |
| Solderability | 90% min. coverage | J-STD-002 245±5°C for 3 seconds |
| Terminal Strength | No broken | AEC-Q200-006 Force of 1.8kg for 60 seconds. |
☑ Maximum Torque: 0.9 N-m
☑ When in Free Air at 25°C, the STR35 is Rated for 2.50W
☑ The Case Temperature is to be used for the Definition of the Applied Power Limit
☑ RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
Soldering Condition
(1) Time of IR reflow soldering at maximum temperature point 260°C：10s
(2) Time of soldering iron at maximum temperature point 410°C：5s
Packaging
Reel Specifications & Packaging Quantity
| Type | Packaging Quantity | Tape Width | Reel Diameter | ΦA (mm) |
ΦB (mm) |
ΦC (mm) |
W (mm) |
T (mm) |
|---|---|---|---|---|---|---|---|---|
| STR35 | 500 pcs | 24mm | 13 inch | 330±1.0 | 100±0.5 | 13.5±0.3 | 25.4±0.5 | 30.0±0.5 |
Emboss Plastic Tape Specifications
| Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ΦD0 (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| STR35 | 10.80±0.10 | 16.13±0.10 | 24.0±0.30 | 1.75±0.1 | 11.5±0.1 | 4.0±0.1 | 16.0±0.1 | 2.0±0.1 | 1.55±0.05 | 5.25±0.20 |
Code
- 0300
- Files Download
-
-
Hot Products
Inductor
Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read More
Capacitor
Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More