SMD平面コイル (SDBシリーズ SDB1365MT1R2)
SDB1365MT1R2
大電流に適応可能なSMDハイパワーチョーク、フラットワイヤーコイル、大電流時の低温上昇、低DCRのための低プロファイル。
SDB Series1365 ±20% 1.2μH 2.5 Ω 48A 30A
| サイズ | 公差 | インダクタンス | 試験条件 | DCR (Ω) 最大 | IDC (A) | 温度上昇電流 (A) |
|---|---|---|---|---|---|---|
| 1365 | ±20% | 1.2 | 100KHz, 0.25V | 2.5 | 48 | 30 |
テープおよびリール仕様（単位：mm）
| Type | Tape size | Parts Per Reel | |
|---|---|---|---|
| W | P | 13" | |
| SDB0420 | 12 | 8 | 3500 |
| SDB0520 | 12 | 8 | 3000 |
| SDB0530 | 12 | 8 | 2500 |
| SDB0620 | 16 | 12 | 2000 |
| SDB0625 | 16 | 12 | 2000 |
| SDB0630 | 16 | 12 | 1500 |
| SDB0650 | 16 | 12 | 800 |
| SDB1040 | 24 | 16 | 800 |
| SDB1340 | 24 | 16 | 500 |
| SDB1350 | 24 | 16 | 500 |
| SDB1365 | 24 | 16 | 500 |
一般的な特性
| Item | Requirement | Test Method | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Solderability | More than 90% of the terminal electrode should be covered with solder. | 230 ± 5°C for 4 ± 1 seconds. | ||||||||||||||
| Solder Heat Resistance | Inductance within ± 20% of initial value. | 260 ± 5°C for 10 ± 1 seconds. | ||||||||||||||
| Heat Resistance | Temperature: 125 ± 5°C Time: 500 hours Tested after 2 hour at room temperature. | |||||||||||||||
| Cold Resistance | Temperature: -40 ± 5°C Time: 500 hours Tested after 2 hour at room temperature. | |||||||||||||||
| Thermal Shock | One cycle:
| |||||||||||||||
| Humidity Resistance | Temperature: 40 ± 2°C, 90 ~ 95% relative humidity. Time: 500 hours. Tested after 2 hour at room temperature. | |||||||||||||||
| Vibration Test | Inductance within ± 5% of initial value. The appearance shall not break. | After vibration for 1hour, in each of three orientations at sweep vibration (10 ~ 55 ~ 10Hz) with 1.52mm P-P amplitudes. |
リフロー
The Condition Of Reflow (Recommendation):
コード
- 1R2
- ファイルダウンロード
主力製品
