自動車アプリケーション
薄膜精密抵抗器0.01％、TC2ppm、ワイヤーボンダブル、防錆性、MELF。 電流センシング、金属、耐硫黄、サージ、高電圧、TO220/247パッケージ最大100Wまで
続きを読む金属フィルム精密MELF抵抗器（CSRVシリーズ）
0102 / 0204 / 0207
デレーティング曲線
高精度のMELF金属フィルム抵抗器、サイズ0102/0204/0207に対応。公差は0.1%、TC5/10/15/25/50/100ppm。抵抗範囲は0.1Ω〜3.4MΩ。
MELFは円筒形で、金属電極のリードレス面抵抗器です。ランドパターンサイズはSMDチップ抵抗器と同じです。
これは、高品質のセラミックボディに均一なNiCrフィルムを堆積させて製造されます。MELF抵抗器の高品質は、優れた電気的および環境的安定性、寿命にわたる優れた安定性、バイアス湿度、短時間過負荷試験で示される卓越した安定性を提供します。
短納期、効果的なコスト管理、価格競争力
機能
- AEC-Q200準拠。
- 薄膜技術。
- 優れた全体的安定性。
- ニッケルバリア層上のスズ終端。
- ±0.1%までの厳しい公差。
- 極めて低いTCR、±10 PPM/°Cまで。
- 最大1ワットの高出力定格。
- SMD対応構造。
- 鉛フリーでRoHS準拠。
アプリケーション
- 自動車（安全部品以外）。
- 産業用。
- 通信。
- 医療機器。
- 測定/試験機器。
構造
技術仕様
| DESCRIPTION | CSRV0102 | CSRV0204 | CSRV0207 | ||||
|---|---|---|---|---|---|---|---|
| Resistance range | 0.22Ω - 1MΩ; 0Ω | 0.1Ω - 10MΩ; 0Ω | 0.1Ω - 10MΩ; 0Ω | ||||
| Resistance tolerance | ± 5%;± 1%;± 0.5%;± 0.25%;± 0.1% | ||||||
| Temperature coefficient | ± 100ppm/°C; ± 50ppm/°C; ± 25ppm/°C; ± 15ppm/°C |
± 100ppm/°C; ± 50ppm/°C; ± 25ppm/°C; ± 15ppm/°C; ± 10ppm/°C |
|||||
| Operation mode | Standard | High power | Standard | High power | Standard | High power | |
| Power rating P70 | 1/8W | 1/5W | 0.3W | 1/4W | 2/5W | 1/2W | 1W |
| Operating voltage Umax. | 150V | 200V | 200V | 200V | 200V | 300V | 350V |
| Operating temperature range | -55°C ~ 155°C | ||||||
| Max. resistance change at P70 for resistance range, ΔR/R max., after 1000 h | ≦ 0.5% | ≦ 0.5% | ≦ 0.5% | ||||
部品番号
標準電気仕様
| Item Type |
Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ± 0.1% (E24,E96) | ± 0.25% (E24,E96) | ± 0.5% (E24,E96) | ± 1% (E24,E96) | ± 5% (E24) | |||||||||
| 0102 | 1/8W | -55 ~ +155°C | 150V | 300V | 49.9Ω - 56KΩ | - | ± 15 | ||||||
| 100Ω - 82KΩ | 4.02Ω- 200KΩ | 4.02Ω- 390KΩ | - | ± 25 | |||||||||
| - | 1Ω - 1MΩ | 0.22Ω - 1MΩ | ± 50 | ||||||||||
| - | 0.22Ω - 1MΩ | ± 100 | |||||||||||
| 0204 | 1/4W | -55 ~ +155°C | 200V | 400V | 10Ω - 332KΩ | - | ± 5 | ||||||
| 10Ω - 20KΩ | - | ± 10 | |||||||||||
| 10Ω - 300KΩ | - | ± 15 | |||||||||||
| 10Ω - 1MΩ | 10Ω - 3.4MΩ | 1Ω - 3.4MΩ | ± 25 | ||||||||||
| 10Ω - 1MΩ | 1Ω - 3.4MΩ | 0.2Ω - 10MΩ | ± 50 | ||||||||||
| - | 0.1Ω-10MΩ | ± 100 | |||||||||||
| 0207 | 1/2W | -55 ~ +155°C | 300V | 600V | 10Ω - 332KΩ | - | ± 5 | ||||||
| 10Ω - 20KΩ | - | ± 10 | |||||||||||
| 10Ω - 300KΩ | - | ± 15 | |||||||||||
| 10Ω - 1MΩ | 10Ω - 3.4MΩ | 1Ω - 3.4MΩ | ± 25 | ||||||||||
| 10Ω - 1MΩ | 1Ω - 3.4MΩ | 0.2Ω - 10MΩ | ± 50 | ||||||||||
| - | 0.1Ω - 10MΩ | ± 100 | |||||||||||
パルス耐性
The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.
連続パルス
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value.
周波数特性
Resistors are designed to function according to ohmic laws. This is basically true of resistors for frequencies up to 100kHz. At higher frequencies, there is an additional contribution to the impedance by an ideal resistor switched in series with a coil and both switched parallel to a capacitor. The values of the capacitance and inductance are mainly determined by the dimensions of the terminations and the conductive path length.
The environment surrounding components has a large influence on the behavior of the component on the printed-circuit board.
雷サージ
Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value.
- ファイルダウンロード
-
- RoHSレポート
-
-
- リーチ
アプリケーション
