自動車アプリケーション
薄膜精密抵抗器0.01％、TC2ppm、ワイヤーボンダブル、防錆性、MELF。 電流センシング、金属、耐硫黄、サージ、高電圧、TO220/247パッケージ最大100Wまで
続きを読むウルトラローオーム（金属ストリップ）チップ抵抗器（LRシリーズ LR12FTDS0M50)
LR12FTDS0M50
金属抵抗器
大電流を検知するための金属ストリップ超低オーム抵抗器、高温に耐える。高温における安定した抵抗変動のための低温係数。
LR Series2512 ±1% 50 2W Series0.5mΩ
| サイズ | 許容差 | TCR（ppm/℃） | 電力 | 抵抗（オーム） |
|---|---|---|---|---|
| 2512 | ±1% | 50 | 2W | 0.5m |
高出力評価の電気仕様
| Item Part No. |
Power Rating at 70°C |
Operating Temp. Range | Resistance Range (mΩ) | TCR (PPM/°C) |
||
|---|---|---|---|---|---|---|
| ±1% | ±3% | ±5% | ||||
| LR10□TEA0M50 | 1.5W | -55°C ~ +170°C | 0.5 | ±100 | ||
| LR10□TDA□□□□ | 1.5W | 0.75 - 10 | ±50 | |||
| LR12□TDS□□□□ | 2W | 0.5, 0.75, 1, 1.5, 2 | ±50 | |||
| LR12□TWS□□□□ | 2W | 6, 6.5, 7 | ±75 | |||
| LR12□TES□□□□ | 2W | 4, 5, 10 | ±100 | |||
| LR12□TKS□□□□ | 2W | 2.5, 3 | ±150 | |||
| LR12□TDS□□□□G | 2W | 6.5, 7, 8, 9, 10 | ±50 | |||
| LR12□TDB□□□□G | 2.5W | 4, 4.5, 5, 6 | ±50 | |||
| LR12□TDR□□□□G | 3W | 1, 1.5, 2, 2.5, 3, 3.5 | ±50 | |||
| LR12□TER□□□□G | 3W | 0.5, 0.75 | ±100 | |||
Operating Current =√(P/R), Operating Voltage=√(P*R)
☑ Viking has the ability of manufacture following options based on customer's requirement..
抵抗コードの例
Resistance (3Marking)
Resistance (4Marking)
| Resistance | 0.5mΩ | 0.75mΩ |
|---|---|---|
| Codes | M50 | M75 |
| Resistance | 1mΩ | 2mΩ | 7mΩ | 10mΩ |
|---|---|---|---|---|
| Codes | R001 | R002 | R007 | R010 |
環境特性
| Item/th> | Requirement | Test Method | |
|---|---|---|---|
| Black coating | Green coating | ||
| Temperature Coefficient of Resistance (T.C.R.) |
As Spec. | MIL-STD-202 Method 304 +25~125°C, 25°C is the reference temperature |
|
| Short Time Overload | ±0.5% | ±1% | JIS-C-5201-1 5.5 5*rated power for 5 seconds |
| Endurance | ±1% | ±1% | MIL-STD-202 Method 108A 70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF” |
| Dry Heat | ±1% | ±1% | JIS-C-5201-1 7.2 at +170°C for 1000 hrs |
| Solderability | 95% min. coverage | MIL-STD-202 Method 208H 245±5°C for 3 seconds |
|
| Resistance to Soldering Heat | ±0.5% | ±1% | MIL-STD-202 Method 210E 260±5°C for 10 seconds |
| Thermal Shock | ±0.5% | ±1% | MIL-STD-202 Method 107G -55°C ~ 150°C, 100 cycles |
**Green coating can't be work with wave soldering bath.
RCWV(Rated Continuous Working Voltage)= √(P*R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15~28°C; Humidity < 80%RH
リフロー
☑ Green coating ”Reflow Air Convection ”is available
☑ Green coating can't be working with wave soldering bath
測定
1. LR12 4-wire precision measurement (Black Coating)
■ Equipment: ADEX AX-1152D DC Low Ohm Meter
■ Excitation Current: 3A (0.5mΩ~1.5 mΩ)
1A (2mΩ~10mΩ)
2. LR12 4-wire pad layout (recommended for precision current sensing)
■ Note: No circuits between pads to avoid short circuit
3. LR12 2-wire pad layout
■ Note: No circuits between pads to avoid short circuit
4. LR12 4-wire precision measurement (Green Coating)
■ Equipment: ADEX AX-1152D DC Low Ohm Meter
■ Excitation Current: 3A (0.5mΩ~1.5 mΩ)
1A (2mΩ~10mΩ)
5. LR12 4-wire pad layout (recommended for precision current sensing)
■ Note: No circuits between pads to avoid short circuit
| Item Type |
a m/m | b m/m | C m/m | I m/m |
|---|---|---|---|---|
| 0M50 | 3.13 | 1.2 | 1.0 | 0.52 |
| 0M75 | 2.93 | 1.2 | 1.0 | 0.94 |
| R001 | 2.38 | 1.2 | 1.0 | 2.04 |
| 1M5 | 1.88 | 1.2 | 1.0 | 3.04 |
| R002~3M5 | 1.63 | 1.2 | 1.0 | 3.54 |
| R004~4M5 | 2.63 | 1.2 | 1.0 | 1.54 |
| R005~R006 | 2.38 | 1.2 | 1.0 | 2.04 |
| 6M5~R007 | 1.88 | 1.2 | 1.0 | 3.04 |
| R008~R010 | 1.63 | 1.2 | 1.0 | 3.54 |
6. LR12 2-wire pad layout
■ Note: No circuits between pads to avoid short circuit
| Item Type |
a m/m | b m/m | I m/m |
|---|---|---|---|
| 0M50 | 3.13 | 3.4 | 0.52 |
| 0M75 | 2.93 | 3.4 | 0.94 |
| R001 | 2.38 | 3.4 | 2.04 |
| 1M5 | 1.88 | 3.4 | 3.04 |
| R002~3M5 | 1.63 | 3.4 | 3.54 |
| R004~4M5 | 2.63 | 3.4 | 1.54 |
| R005~R006 | 2.38 | 3.4 | 2.04 |
| 6M5~R007 | 1.88 | 3.4 | 3.04 |
| R008~R010 | 1.63 | 3.4 | 3.54 |
7. LR06 4-wire precision measurement
■ Equipment: ADEX AX-1152D DC Low Ohm Meter
■ Excitation Current: 1A (0.5mΩ~10mΩ)
8. LR06 4-wire pad layout (recommended for precision current sensing)
■ Note: No circuits between pads to avoid short circuit
| Item Type |
a m/m | b m/m | C m/m | I m/m |
|---|---|---|---|---|
| 0M50 | 1.80 | 0.7 | 0.5 | 0.55 |
| 0M75 | 1.68 | 0.7 | 0.5 | 0.55 |
| R001 | 1.55 | 0.7 | 0.5 | 0.55 |
| 1M2 | 1.35 | 0.7 | 0.5 | 0.95 |
| 1M5 | 1.35 | 0.7 | 0.5 | 1.55 |
| R002~R003 | 1.05 | 0.7 | 0.5 | 1.55 |
| 3M5~R006 | 1.55 | 0.7 | 0.5 | 0.55 |
| R007~R009 | 1.35 | 0.7 | 0.5 | 0.95 |
| R010 | 1.05 | 0.7 | 0.5 | 1.55 |
9. LR06 2-wire pad layout
■ Note: No circuits between pads to avoid short circuit
| Item Type |
a m/m | b m/m | I m/m |
|---|---|---|---|
| 0M50 | 1.80 | 1.90 | 0.55 |
| 0M75 | 1.68 | 1.90 | 0.55 |
| R001 | 1.55 | 1.89 | 0.55 |
| 1M2 | 1.35 | 1.90 | 0.95 |
| 1M5 | 1.35 | 1.89 | 1.55 |
| R002~R003 | 1.05 | 1.89 | 1.55 |
| 3M5~R006 | 1.55 | 1.89 | 0.55 |
| R007~R009 | 1.35 | 1.89 | 0.95 |
| R010 | 1.05 | 1.89 | 1.55 |
10. 10. LR10 4-wire precision measurement
■ Equipment: ADEX AX-1152D DC Low Ohm Meter
■ Excitation Current: 1A (0.5mΩ~10mΩ)
11. LR10 4-wire pad layout (recommended for precision current sensing)
■ Note: No circuits between pads to avoid short circuit
| Item Type |
a m/m | b m/m | C m/m | I m/m |
|---|---|---|---|---|
| 0M50 | 2.61 | 1.045 | 0.8 | 0.60 |
| 0M75 | 2.49 | 1.045 | 0.8 | 0.80 |
| R001~1M5 | 2.29 | 1.045 | 0.8 | 0.95 |
| R002 | 1.99 | 1.045 | 0.8 | 1.55 |
| R003~3M5 | 1.49 | 1.045 | 0.8 | 2.55 |
| R004~5M5 | 2.29 | 1.045 | 0.8 | 0.95 |
| R006~R008 | 1.99 | 1.045 | 0.8 | 1.55 |
| R009~R010 | 1.74 | 1.045 | 0.8 | 2.05 |
12. LR10 2-wire pad layout
■ Note: No circuits between pads to avoid short circuit
| Item Type |
a m/m | b m/m | I m/m |
|---|---|---|---|
| 0M50 | 2.61 | 2.89 | 0.60 |
| 0M75 | 2.49 | 2.89 | 0.80 |
| R001~1M5 | 2.29 | 2.89 | 0.95 |
| R002 | 1.99 | 2.89 | 1.55 |
| R003~3M5 | 1.49 | 2.89 | 2.55 |
| R004~5M5 | 2.29 | 2.89 | 0.95 |
| R006~R008 | 1.99 | 2.89 | 1.55 |
| R009~R010 | 1.74 | 2.89 | 2.05 |
包装
Embossed Plastic Tape Specifications
| Type | Resistance (mΩ) |
A | B | W | E | F | P0 | P1 | P2 | ΦD0 | ΦD1 | T | Quantity (EA) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LR06 | 0.5 - 10 | 1.90±0.1 | 3.60±0.1 | 8.0±0.2 | 1.75±0.1 | 3.5±0.05 | 4.0±0.1 | 4.0±0.1 | 2.0±0.05 | 1.55±0.05 | 1.0min. | 0.87±0.1 | 2,000 |
| LR10 | 0.5 - 10 | 2.85±0.1 | 5.55±0.1 | 12.0±0.2 | 1.75±0.1 | 5.5±0.05 | 4.0±0.1 | 4.0±0.1 | 2.0±0.05 | 1.55±0.05 | 1.4min. | 0.85±0.1 | 2,000 |
| LR12 | 0.50 - 0.75 | 3.40±0.1 | 6.75±0.1 | 12.0±0.1 | 1.75±0.1 | 5.5±0.05 | 4.0±0.1 | 4.0±0.1 | 2.0±0.05 | 1.55±0.05 | 1.4min. | 1.45±0.2 | 2,000 |
| 1 - 10 | 0.81±0.1 | ||||||||||||
| LR12 (G) | 0.50 - 10 | 3.40±0.1 | 6.75±0.1 | 12.0±0.1 | 1.75±0.1 | 5.5±0.05 | 4.0±0.1 | 4.0±0.1 | 2.0±0.05 | 1.55±0.05 | 1.4min. | 0.81±0.1 | 2,000 |
- The cumulative tolerance of 10 sprockets hole pitch is ± 0.2mm.
- Carrier camber shall be not more than 1mm per 100mm through a length of 250mm.
- A & B measured 0.3mm from the bottom of the packet.
- T measured at a point on the inside bottom of the packet to the top surface of the carrier.
- Pocket position relative to sprocket hole is measured as the true position of the pocket and not the pocket hole.
コード
- 0M50
- ファイルのダウンロード
-
-
ベストセール
主力製品
