Fabricante com mais de 25 anos Indutor de Potência Choke (Série SDA)

Indutor de Potência Choke (Série SDA)

0420 / 0430 / 0530 / 0630 / 0660 / 0730 / 0750 / 0880 / 1006 / 1010 / 1508 / 1510 / 1513

Indutor de Potência SMD Moldado Blindado - Série SDA Files Download

Recursos

Baixas perdas realizadas com baixo DCR
Alto desempenho realizado por núcleo de pó metálico.
Ruído de zumbido ultra baixo, devido à construção composta.
100% Livre de Chumbo (Pb) e em conformidade com a RoHS.

Aplicações

Aplicações comerciais

Indutância e Faixas de Corrente Nominal

- SDA0420LR 0.47 ~ 2.20μH, 12.5 ~ 4.8A
- SDA0430LR 1.00 ~ 3.30μH, 9.0 ~ 5.3A
- SDA0530A 0.47 ~ 4.70μH, 24.0 ~ 7.0A
- SDA0630A 0.33 ~ 4.50μH, 28.0 ~ 12.2A
- SDA0660LR 1.00 ~ 22.0μH, 16.0 ~ 5.0A
- SDA0730A 1.00 ~ 4.70μH, 28.0 ~ 12.2A
- SDA0750A 2.20 ~ 5.60μH, 17.0 ~ 11.0A
- SDA0880A 3.30 ~ 10.0μH, 20.0 ~ 10.0A
- SDA1006A 2.20 ~ 10.0μH, 36.0 ~ 13.0A
- SDA1010A 4.70 ~ 10.0μH, 21.4 ~ 14.6A
- SDA1508A 2.20 ~ 22.0μH, 49.0 ~ 16.0A
- SDA1510A 4.70 ~ 33.0μH, 39.0 ~ 16.7A
- SDA1513A 4.70 ~ 33.0μH, 40.0 ~ 16.0A
- Test equipment:
• L/Q: HP4284A,HP4395A,CH11025,CH3302,CH1320,CH1320S LCR meter
• DCR: CH16502,Agilent33420AMicro Ohm Meter,or EQU.

Características

- All test data referenced to 25°C ambient.
- Current that causes the specified temperature rise from 25°C ambient.
- The part temperature (ambient + temp rise) should not exceed 125°C under worst case operating conditions. Circuit design, component, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
- Irms Testing : Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.
- Operating temperature range: -40 ~ 125°C(Including self - temperature rise)
- SDA0420LR/SDA0430LR
Saturation Current (Isat 1) will cause L0 to drop approximately 10%
Saturation Current (Isat 2) will cause L0 to drop approximately 20%
Saturation Current (Isat 3) will cause L0 to drop approximately 30%
- SDA0530A/SDA0560A/SDA0660LR/SDA0730A/SDA0750A/ASDA0880A/SDA1006A/SDA1010A/SDA1508A/SDA1510A/SDA1513A
Saturation Current (Isat) will cause L0 to drop approximately 30%
- SDA0420LR/SDA0430LR/SDA0660LR
Rated operating voltage (across inductor) 15V ref.
- SDA0530A/SDA0630A/SDA0730A/SDA0750A/SDA0880A/SDA1006A/SDA1010A/SDA1508A/SDA1510A/SDA1513A
Rated operating voltage (across inductor) 40V ref.

Identificação do Produto

Shielded SMD Power Inductor - SDA Series Product Identification

Especificações Elétricas Padrão

SDA0420 Type / LR Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)				Irms (A) Typ.
				Typ.	Max.	Typ.			Max.	20°C rise	40°C rise
				Typ.	Max.	1	2	3	3
SDA0420MTLRR47	0.47	± 20%	100KHz, 0.1V	6.0	6.8	7.0	10.0	14.0	12.5	9.8	13.2
SDA0420MTLRR56	0.56	± 20%	100KHz, 0.1V	6.9	7.8	6.0	9.0	13.0	11.3	9.5	12.6
SDA0420MTLRR68	0.68	± 20%	100KHz, 0.1V	7.3	8.2	5.2	8.0	11.6	10.0	9.2	12.0
SDA0420MTLR1R0	1.0	± 20%	100KHz, 0.1V	10.6	11.7	4.5	5.4	9.2	8.0	8.0	11.0
SDA0420MTLR1R5	1.5	± 20%	100KHz, 0.1V	14.4	15.8	4.1	4.5	7.5	6.7	6.7	9.1
SDA0420MTLR2R2	2.2	± 20%	100KHz, 0.1V	21.35	23.5	3.1	3.8	6.0	4.8	6.0	8.0

SDA0430 Type / LR Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)				Irms (A) Typ.
				Typ.	Max.	Typ.			Max.	20°C rise	40°C rise
				Typ.	Max.	1	2	3	3
SDA0430MTLR1R0	1.0	± 20%	100KHz, 0.1V	9.1	10.1	5.0	6.8	9.8	9.0	8.0	11.0
SDA0430MTLR1R2	1.2	± 20%	100KHz, 0.1V	10.4	11.5	4.6	6.4	9.2	8.7	7.8	9.8
SDA0430MTLR1R5	1.5	± 20%	100KHz, 0.1V	12.0	13.2	4.1	5.6	8.0	7.0	7.0	9.0
SDA0430MTLR2R2	2.2	± 20%	100KHz, 0.1V	20.5	22.6	3.6	5.1	7.0	6.1	6.0	7.8
SDA0430MTLR3R3	3.3	± 20%	100KHz, 0.1V	26.0	28.6	3.3	4.8	6.2	5.3	5.0	6.6

SDA0530 Type / A Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise
SDA0530MTAR47	0.47	± 20%	100KHz, 0.1V	3.75	4.13	26.0	24.0	13.7	18.4
SDA0530MTAR56	0.56	± 20%	100KHz, 0.1V	4.05	4.52	22.2	20.2	13.6	17.7
SDA0530MTAR82	0.82	± 20%	100KHz, 0.1V	5.25	5.78	19.7	17.6	9.9	12.9
SDA0530MTA1R0	1.0	± 20%	100KHz, 0.1V	6.90	7.60	16.5	14.3	9.0	12.2
SDA0530MTA1R5	1.5	± 20%	100KHz, 0.1V	10.1	11.2	14.0	12.5	8.0	10.5
SDA0530MTA2R2	2.2	± 20%	100KHz, 0.1V	13.2	14.5	10.0	9.0	7.2	9.7
SDA0530MTA3R3	3.3	± 20%	100KHz, 0.1V	21.0	23.1	9.5	8.7	5.9	8.1
SDA0530MTA4R7	4.7	± 20%	100KHz, 0.1V	33.0	36.3	8.2	7.0	4.3	5.9

SDA0630 Type / A Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.		C(mm)	D(mm)
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise	C(mm)	D(mm)
SDA0630MTAR33	0.33	± 20%	100KHz, 0.1V	2.25	2.50	32.0	28.0	20.0	25.0	2.8± 0.2	5.55± 0.3
SDA0630MTAR68	0.68	± 20%	100KHz, 0.1V	4.70	5.17	25.0	21.0	15.0	20.0	2.8± 0.2	5.3± 0.3
SDA0630MTA1R0	1.0	± 20%	100KHz, 0.1V	5.50	6.05	23.0	18.0	13.0	18.0	2.8± 0.2	5.2± 0.3
SDA0630MTA1R5	1.5	± 20%	100KHz, 0.1V	8.30	9.13	20.0	15.5	11.0	15.0	2.9± 0.2	5.15± 0.3
SDA0630MTA2R2	2.2	± 20%	100KHz, 0.1V	11.0	12.2	15.9	11.0	7.0	10.0	2.9± 0.2	5.05± 0.3
SDA0630MTA3R3	3.3	± 20%	100KHz, 0.1V	18.8	20.8	12.2	9.0	6.0	8.0	2.9± 0.2	5.0± 0.3
SDA0630MTA4R5	4.5	± 20%	100KHz, 0.1V	23.0	25.3	10.0	8.0	5.0	7.0	2.9± 0.2	5.0± 0.3

SDA0660 Type / LR Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise
SDA0660MTLR1R0	1.0	± 20%	100KHz, 0.1V	3.9	4.29	18.0	16.0	15.0	19.0
SDA0660MTLR2R2	2.2	± 20%	100KHz, 0.1V	7.0	7.8	14.0	12.0	11.0	14.0
SDA0660MTLR3R3	3.3	± 20%	100KHz, 0.1V	11.0	12.1	11.5	10.5	9.0	12.0
SDA0660MTLR4R7	4.7	± 20%	100KHz, 0.1V	13.1	14.4	10.5	9.5	8.0	11.0
SDA0660MTLR8R2	8.2	± 20%	100KHz, 0.1V	22.5	24.8	8.5	8.0	6.0	8.0
SDA0660MTLR100	10	± 20%	100KHz, 0.1V	26.6	29.3	7.6	6.8	5.0	7.0
SDA0660MTLR150	15	± 20%	100KHz, 0.1V	39.0	43.0	5.8	5.2	4.5	6.0
SDA0660MTLR220	15	± 20%	100KHz, 0.1V	55.0	60.5	5.6	5.0	3.8	5.0

SDA0730 Type / A Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.		D(mm)
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise	D(mm)
SDA0730MTA1R0	1.0	± 20%	100KHz, 0.1V	4.55	5.00	30.0	28.0	16.1	21.8	6.6± 0.3
SDA0730MTA1R5	1.5	± 20%	100KHz, 0.1V	7.50	8.25	25.0	23.5	12.0	15.3	6.6± 0.3
SDA0730MTA2R2	2.2	± 20%	100KHz, 0.1V	12.4	13.7	19.0	17.0	10.0	13.0	6.2± 0.3
SDA0730MTA3R3	3.3	± 20%	100KHz, 0.1V	16.3	18.0	15.0	13.0	8.0	10.0	6.2± 0.3
SDA0730MTA4R7	4.7	± 20%	100KHz, 0.1V	24.2	26.7	13.5	12.2	6.9	9.0	6.2± 0.3

SDA0750 Type / A Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.		D(mm)
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise	D(mm)
SDA0750MTA2R2	2.2	± 20%	100KHz, 0.1V	5.8	6.4	21.0	17.0	11.0	14.0	6.2± 0.3
SDA0750MTA3R3	3.3	± 20%	100KHz, 0.1V	10.4	11.44	17.0	14.0	10.0	13.0	6.2± 0.3
SDA0750MTA4R7	4.7	± 20%	100KHz, 0.1V	14.0	15.4	15.0	13.0	8.5	11.0	6.2± 0.3
SDA0750MTA5R6	5.6	± 20%	100KHz, 0.1V	15.6	17.2	13.0	11.0	7.0	10.0	6.2± 0.3

SDA0880 Type / A Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.		D(mm)
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise	D(mm)
SDA0880MTA3R3	3.3	± 20%	100KHz, 0.1V	6.6	7.3	23.0	20.0	13.5	18.0	6.9± 0.4
SDA0880MTA4R7	4.7	± 20%	100KHz, 0.1V	8.9	9.8	19.0	17.0	10.5	14.6	6.9± 0.4
SDA0880MTA6R8	6.8	± 20%	100KHz, 0.1V	13.0	14.3	14.5	12.5	8.0	11.3	6.9± 0.4
SDA0880MTA100	10	± 20%	100KHz, 0.1V	20.8	22.9	11.0	10.0	6.6	8.7	6.9± 0.4

SDA1006 Type / A Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.		D(mm)
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise	D(mm)
SDA1006MTA2R2	2.2	± 20%	100KHz, 0.1V	4.40	4.84	35.0	30.0	14.0	20.0	9.0± 0.5
SDA1006MTA3R3	3.3	± 20%	100KHz, 0.1V	7.00	7.70	28.0	25.0	11.4	16.8	9.0± 0.5
SDA1006MTA4R7	4.7	± 20%	100KHz, 0.1V	9.70	10.72	25.0	22.0	8.7	14.0	9.0± 0.5
SDA1006MTA5R6	5.6	± 20%	100KHz, 0.1V	10.80	11.90	20.0	17.0	7.0	12.0	8.8± 0.5
SDA1006MTA6R8	6.8	± 20%	100KHz, 0.1V	11.8	13.0	18.0	15.5	6.0	10.5	8.8± 0.5
SDA1006MTA8R2	8.2	± 20%	100KHz, 0.1V	15.0	16.5	16.5	14.0	5.0	9.5	8.8± 0.5
SDA1006MTA100	10	± 20%	100KHz, 0.1V	16.5	18.2	15.0	13.0	4.5	9.0	8.8± 0.5

SDA1010 Type / A Material (Electrical Characteristics)

Part No.	Inductance (μH)	Tolerance	Test Condition	DCR (mΩ)		I sat (A)		Irms (A) Typ.		D(mm)
Part No.	Inductance (μH)	Tolerance	Test Condition	Typ.	Max.	Typ.	Max.	20°C rise	40°C rise	D(mm)
SDA1010MTA4R7	4.7	± 20%	100KHz, 0.1V	5.2	5.7	25.4	21.4	17.5	24.0	9.3± 0.5
SDA1010MTA5R6	5.6	± 20%	100KHz, 0.1V	6.5	7.2	23.6	19.6	15.7	21.2	9.3± 0.5
SDA1010MTA6R8	6.8	± 20%	100KHz, 0.1V	8.1	8.9	21.8	18.5	14.0	18.5	9.0± 0.5
SDA1010MTA8R2	8.2	± 20%	100KHz, 0.1V	10.8	12.4	18.3	16.3	12.9	17.1	9.0± 0.5
SDA1010MTA100	10	± 20%	100KHz, 0.1V	12.5	13.75	17.5	14.6	11.5	15.5	9.0± 0.5

Download de Arquivos

SDA_Series Data Sheet (Edition REV.A1).pdf

Relatório RoHS

Relatório RoHS
Relatório RoHS da Série SDA

ALCANCE

Declaração REACH - SVHC(Hsin Chu)

PROCURAR

Pesquisa de condição: Pesquisa cruzada

Melhor Venda

Indutor de Potência Choke (Série SDA)Fabricante - Viking

Com sede em Taiwan, Viking Tech Corporation é um dos principais fabricantes de indutores de potência Power Choke (Série SDA) desde 1997. E seus produtos são utilizados em aplicações automotivas e de dispositivos eletrônicos.

TS16949/ ISO9001/ ISO14001 e atende aos padrões AEC-Q200, Viking tem oferecido resistores de precisão de alta voltagem, alta potência, anti-sulfur, anti-surge, pulso, incluindo resistores de filme fino/ espesso, resistores automotivos, resistores melf, resistores de detecção de corrente, etc. Indutores de baixo ruído, baixo TC, alta potência, como indutores de RF, indutores de chip, indutores de potência, indutores variáveis, indutores de chip de ferrite, indutores blindados, indutores de fio enrolado e indutores de mergulho.

Viking tem oferecido aos clientes resistores de potência, indutores de potência e capacitores eletrolíticos de alumínio de alta qualidade com sólida reputação. Com tecnologia avançada e 25 anos de experiência, Viking garante atender às demandas de cada cliente.

Veja os nossos produtos de qualidade Indutor de Potência, Resistor de Chip de Filme Fino, Indutor RF, Resistor de Chip, resistor de sensor de corrente, filme metálico, resistores de metal, Resistor de filme grosso, Capacitor de Chip, Resistor de potência e sinta-se à vontade para Contacte-nos.