
APLICAÇÕES AUTOMOTIVAS
Resistor de precisão de filme fino 0,01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Detecção de corrente,...
consulte Mais informaçãoResistor de filme metálico de precisão MELF de alta tensão, pronto para os tamanhos 0204/0207. Tolerância apertada de 0,1%, 25/50ppm. 340K~3.4Mohm. Max Overload até 2000V. O MELF tem formato cilíndrico e com resistor de face metálica sem eletrodos. Os tamanhos dos padrões de terra são os mesmos que os resistores de chip SMD. A alta qualidade dos resistores MELF oferece excelente estabilidade elétrica e ambiental, estabilidade excepcional demonstrada ao longo da vida, umidade com viés e testes de sobrecarga de curto prazo.

Part Number:CSRP0204FTDG1004

| Item Type | Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | |||
|---|---|---|---|---|---|---|---|---|---|
| ±0.1% (E24,E96) | ±0.25% (E24,E96) | ±0.5% (E24,E96) | ±1% (E24,E96) | ||||||
| 0204 | 2/5W | -55 ~ +155°C | 700V | 1400V | 100KΩ-1MΩ | 100KΩ-3.4MΩ | ±25 | ||
| 100KΩ-1MΩ | 100KΩ-3.4MΩ | 100KΩ-10MΩ | ±50 | ||||||
| 0207 | 1W | -55 ~ +155°C | 1200V | 2400V | 100KΩ-1MΩ | 100KΩ-3.4MΩ | ±25 | ||
| 100KΩ-1MΩ | 100KΩ-3.4MΩ | 100KΩ-10MΩ | ±50 | ||||||
Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower.
Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower.
RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
☑ Viking is capable of manufacturing the optional spec based on customer's requirement.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value.
Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value.

Resistor de precisão de filme fino 0,01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Detecção de corrente,...
consulte Mais informação
Indutores de chip cerâmico de alta frequência, tamanho pequeno até 01005. Indutor de filme fino, multicamada,...
consulte Mais informação
O capacitor cerâmico multicamada oferece alta tensão, alta frequência, baixo ruído, alta Q, baixo...
consulte Mais informação