Thin Film Chip Resistor (ARG Series ARG02BTC17R8)

Viking Tech has the experience in the design of innovative components, offering support and service to Global customers that demand a genuine manufacturing partner. Our goal is to be the leader in design, manufacturing, and marketing of miniature, precision passive components used throughout Automotive, Industrial and 3C electronic applications.

Thin Film Chip Resistor (ARG Series ARG02BTC17R8)

ARG02BTC17R8

Thin Film Chip Resistor (ARG Series ARG02BTC17R8)
Thin Film Chip Resistor (ARG Series ARG02BTC17R8) Files Download

Thin film high precision resistor, General purpose for accurate resistor with speical consturction, Low cost and good performance.
ARG Series0402 ±0.1% 25 1/16W Series17.8Ω 10K/Reel

SizeToleranceTCR (ppm /℃)PowerResistance (Ohm)Package
0402±0.1%251/16W17.810K/Reel

Environmental Characteristics

ItemRequirementTest Method
Temperature Coefficient of Resistance (T.C.R.)As Spec.MIL-STD-202 Method 304
+25/-55/+25/+125/+25°C
Short Time OverloadΔR±0.2%JIS-C-5201-1 4.13
RCWV*2.5 or Max. overload voltage whichever is lower for 5 seconds
Insulation Resistance>9999 MΩMIL-STD-202 Method 302
Apply 100VDC for 1 minute
EnduranceΔR±0.5%MIL-STD-202 Method 108A
70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”
Damp Heat with Load  ΔR±0.5%MIL-STD-202 Method 103B
40±2°C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”
Bending StrengthΔR±0.1%JIS-C-5201-1 4.33
Bending amplitude 3 mm for 10 seconds
Solderability95% min. coverageMIL-STD-202 Method 208H
245±5°C for 3 seconds
Resistance to Soldering HeatΔR±0.1%MIL-STD-202 Method 210E
260±5°C for 10 seconds
Dielectric Withstand VoltageBy TypeMIL-STD-202 Method 301
Max. overload voltage for 1 minute
Thermal ShockΔR±0.2%MIL-STD-202 Method 107G
-55°C ~150°C, 100 cycles
Low Temperature OperationΔR±0.5%JIS-C-5201-1 4.36
1 hour, -65°C, followed by 45 minutes of RCWV
High Temperature ExposureΔR±0.5% MIL-STD-202 Method 108
at 155°C for 1000 hrs

RCWV(Rated continuous working voltage)= √(P*R) or Max. Operating voltage whichever is lower
☑ Storage Temperature: 15~28°C; Humidity < 80%RH

Soldering Condition

IR Reflow Soldering / Wave Soldering (Flow Soldering)
(1) Time of IR reflow soldering at maximum temperature point 260°C:10s
(2) Time of wave soldering at maximum temperature point 260°C:10s
(3) Time of soldering iron at maximum temperature point 410°C:5s

Marking

0603 3digit marking

Marking Table

CodeE96CodeE96CodeE96CodeE96
01100251784931673562
02102261825032474576
03105271875133275590
04107281915234076604
05110291965334877619
06113302005435778634
07115312055536579649
08118322105637480665
09121332155738381681
10124342215839282698
11127352265940283715
12130362326041284732
13133372376142285750
14137382436243286768
15140392496344287787
16143402556445388806
17147412616546489825
18150422676647590845
19154432746748791866
20158442806849992887
21162452876951193909
22165462947052394931
23169473017153695953
2417448

309

7254996976
CodeABCDEFGHXYZ
Multiplier10s010110210310410510610710-110-210-3

0603 3digit marking for E24
Example: 101=100Ω  102=1KΩ

E24101112131516182022242730333639434751566268758291

0805~2512 4digit marking
Example

Resistance100Ω2.2KΩ10KΩ49.9KΩ100KΩ
marking10002201100249921003

Packaging

Packing Quantity & Reel Specifications (Unit :mm)

TypeØAØBØCWTPaper Type(EA)Emboss Plastic Tape(EA)Packing Quantity & Reel Specifications
ARG02178.0±1.060.0+1.013.5±0.79.5±1.011.5±1.010,000-
ARG03178.0±1.060.0+1.013.5±0.79.5±1.011.5±1.05,000-
ARG05178.0±1.060.0+1.013.5±0.79.5±1.011.5±1.05,000-
ARG06178.0±1.060.0+1.013.5±0.79.5±1.011.5±1.05,000-

Paper Tape Specifications

Paper Tape Specifications
TypeABWEFP0P1P2ΦD0T
ARG020.70±0.051.16±0.058.00±0.101.75±0.053.5±0.054.00±0.102.00±0.052.00±0.051.55±0.050.40±0.03
ARG031.10±0.051.90±0.058.00±0.101.75±0.053.5±0.054.00±0.104.00±0.102.00±0.051.55±0.050.60±0.03
ARG051.60±0.052.37±0.058.00±0.101.75±0.053.5±0.054.00±0.104.00±0.102.00±0.051.55±0.050.75±0.05
ARG062.00±0.053.55±0.058.00±0.101.75±0.053.5±0.054.00±0.104.00±0.102.00±0.051.55±0.050.75±0.05

☑ Peel force of top cover tape
☑ The peel speed shall be about 300mm/min±5%
☑ The peel force of top cover tape shall be between 8gf to 60gf

Paper Tape Specifications

Code

  • 17R8
Files Download


SEARCH

Condition search:      Cross Search

Menu

Best Sale

Viking

Viking Tech Corporation is Taiwan supplier and manufacturer in Certified RF Inductor Supplier Viking has been offering our customers high quality Thin film precision resistor, current sensing resistor, RF ceramic chip inductor, power inductor, MELF thin film resistor, Thick film resistor, MLCC, Multilayer chip capacitor, Chip bead, power resistor, Anti-sulfur resistor, high voltage resistor, Anti-surge resistor, anti-pulse resistor. Resistor array, leaded resistor, Aluminum solid electrolytic capacitor since 1997. With both advanced technology and 25 years experience, Viking always make sure to meet each customer's demand.


Main Product

AUTOMOTIVE APPLICATIONS

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
MEDICAL APPLICATIONS

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
COMMUNICATION APPLICATIONS

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More