Anti-Sulfurated Thick Film Chip Resistor (AS Series AS01FTF0110)

Anti-Sulfurated Thick Film Chip Resistor (AS Series AS01FTF0110)

AS01FTF0110

Anti-Sulfurated Thick Film Chip Resistor (AS Series AS01FTF0110)
Anti-Sulfurated Thick Film Chip Resistor (AS Series AS01FTF0110) Files Download

Anti-sulfurated thick film resistor, special construction to prevent in a sulfur contining environment.
AS Series0201 ±1% 200 1/20W Series11Ω 10K/Reel

SizeToleranceTCR (ppm /℃)PowerResistance (Ohm)Package
0201±1%2001/20W1110K/Reel

High Power Rating Electrical Specifications

Item / Type Power Rating
at 70°C
Operating Temp.
Range
Max.
Operating Voltage
Max.
Overload Voltage
Resistance Range TCR
(PPM/°C)
±1%
(E24、E96)
±5%
(E24)
AS01 (0201) 1/12W -55 ~ +125°C 25V 50V 10Ω - 1MΩ ±200
AS02 (0402) 1/10W -55 ~ +155°C 50V 100V 1Ω - 9.76Ω
10Ω - 1MΩ
±200
±100
AS03 (0603) 1/4W 75V 150V
AS05 (0805) 1/3W 150V 300V
AS06 (1206) 1/3W 200V 400V
AS10 (1210) 1/2W 200V 400V
AS0A (2010) 1W 200V 400V

Operating Voltage=√(P*R) or Max. Operating Voltage listed above, whichever is lower.
Overload Voltage=2.5*√(P*R) or Max. Overload Voltage listed above, whichever is lower.
☑ Viking is capable of manufacturing the optional spec based on customer's requirement.

Environmental Characteristics

Item Requirement Test Method
±1% and Below ±5% Jumper
Temperature Coefficient of
Resistance (T.C.R.)
As Spec. JIS-C-5201-1 4.8
IEC-60115-1 4.8
At 25°C/-55°C and 25°C/+125°C, 25°C is the reference temperature
Short Time Overload ±(1.0%+0.05Ω) ±(2.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.13
IEC-60115-1 4.13
RCWV*2.5 or Max. Overload Voltage whichever is lower for 5 seconds, 2 seconds for high power series
Insulation Resistance ³10G JIS-C-5201-1 4.6
IEC-60115-1 4.6
Max. Overload Voltage for 1 minute
Endurance ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <100mΩ JIS-C-5201-1 4.25
IEC-60115-1 4.25.1
70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Damp Heat with Load ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <100mΩ JIS-C-5201-1 4.24
IEC-60115-1 4.24
40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Dry Heat ±(1.0%+0.05Ω) ±(1.5%+0.10Ω) <50mΩ JIS-C-5201-1 4.23
IEC-60115-1 4.23.2
at +125/+155°C for 1000 hrs
Bending Strength ±(1.0%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.33
IEC-60115-1 4.33
Bending once for 5 seconds
2010, 2512 sizes: 2mm   Other sizes: 3mm
Solderability 95% min. coverage JIS-C-5201-1 4.17
IEC-60115-1 4.17
245±5°C for 3 seconds
Resistance to Soldering Heat ±(0.5%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.18
IEC-60115-1 4.18
260±5°C for 10 seconds
Voltage Proof No breakdown or flashover JIS-C-5201-1 4.7
IEC-60115-1 4.7
1.42 times Max. Operating Voltage for 1 minute
Leaching Individual leaching area ≦5%
Total leaching area ≦ 10%
JIS-C-5201-1 4.18
IEC-60068-2-58 8.2.1
260±5°C for 30 seconds
Rapid Change of Temperature ±(0.5%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.19
IEC-60115-1 4.19
-55°C to +125/+155°C, 5 cycles
Sulfur Test ±(0.5%+0.05Ω) ±(0.5%+0.05Ω) <50mΩ ASTM-B-809-95
H2S, 50±2°C, 91~93% R.H., no power rating for 1000 hrs

RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15~28°C; Humidity < 80%RH

Soldering Condition

IR Reflow Soldering / Wave Soldering (Flow Soldering)
(1) Time of IR reflow soldering at maximum temperature point 260°C:10s
(2) Time of wave soldering at maximum temperature point 260°C:10s
(3) Time of soldering iron at maximum temperature point 410°C:5s

Marking

No Marking for 0201 and 0402
Jumper for all: Letter “0”
1% for 0805/1206/1210/2010/2512:
4 digits marking
Example:

Resistance 100Ω 2.2KΩ 10KΩ 49.9KΩ 100KΩ
Marking 1000 2201 1002 4992 1003

5% for 0603/0805/1206/1210/2010/2512: 3 digits marking in E24
Example: 101=100Ω   102=1KΩ (1st and 2nd are E24 code and 3rd code is multiplier)

E24 code 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91

1% for 0603: 3 digits marking in E96
0603 3digit marking

Marking Table

Code E96 Code E96 Code E96 Code E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48

309

72 549 96 976
Code A B C D E F G H X Y Z
Multiplier 10s0 101 102 103 104 105 106 107 10-1 10-2 10-3

Packaging

Reel Specifications & Packaging Quantity

Packing Quantity & Reel Specifications
Type Packaging Quantity Tape Width Reel Diameter ΦA (mm) ΦB (mm) ΦC (mm) W (mm) T (mm)
AS01
AS02
Paper 10K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
20K 10 inch 254±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
40K 13 inch 330±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
AS03
AS05
AS06
AS10
Paper 5K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
10K 10 inch 254±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
20K 13 inch 330±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
AS0A
AS12
Embossed 4K 12mm 7 inch 178.5±1.5 60+1/-0 13.0±0.5 13.0±0.5 15.5±0.5
8K 10 inch 250±1.0 62±0.5 13.0±0.5 12.5±0.5 16.5±0.5

Paper Tape Specifications

Paper Tape Specifications
Type A (mm) B (mm) W (mm) E (mm) F (mm) P0 (mm) P1 (mm) P2 (mm) ΦD0 (mm) T (mm)
AS01 0.38±0.05 0.68±0.05 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 2.00±0.05 2.00±0.05 1.50+0.1,-0 0.42±0.20
AS02 0.65±0.10 1.15±0.10 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 2.00±0.05 2.00±0.05 1.50+0.1,-0 0.45±0.10
AS03 1.10±0.10 1.90±0.10 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.70±0.10
AS05 1.60±0.10 2.40±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10
AS06 1.90±0.10 3.50±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10
AS10 2.90±0.10 3.50±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10

Emboss Plastic Tape Specifications

Emboss Plastic Tape Specifications
Type A (mm) B (mm) W (mm) E (mm) F (mm) P0 (mm) P1 (mm) P2 (mm) ΦD0 (mm) T (mm)
AS0A 2.8±0.10 5.5±0.10 12.0±0.30 1.75±0.10 5.5±0.05 4.00±0.10 4.00±0.10 2.00±0.05 1.50+0.1, -0 1.2+0
AS12 3.5±0.10 6.7±0.10 12.0±0.30 1.75±0.10 5.5±0.05 4.00±0.10 4.00±0.10 2.00±0.05 1.50+0.1, -0 1.2+0

Code

  • 0110
Files Download
  • Data Sheet
    Data Sheet

    Anti-Sulfurated Thick Film Chip Resistor - AS Series




SEARCH

Condition search:      Cross Search

Best Sale

Anti-Sulfurated Thick Film Chip Resistor (AS Series AS01FTF0110) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime Anti-Sulfurated Thick Film Chip Resistor (AS Series AS01FTF0110) manufacturers since 1997. And their products are used throughout automotive, electronic device applications.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Viking has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 20 years of experience, Viking makes sure to meet each customer's demands.


Hot Products

Resistor

Resistor

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
Inductor

Inductor

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
Capacitor

Capacitor

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More