High Ohmic Chip Resistor (HMR Series HMR05JL7--390M)

High Ohmic Chip Resistor (HMR Series HMR05JL7--390M)


High Ohmic Chip Resistor (HMR Series HMR05JL7--390M)
High Ohmic Chip Resistor (HMR Series HMR05JL7--390M) Files Download

General purpose thick film resistor for high ohmic upto 1G ohm. high reliablel multilayer electrode consturction chip resistor.
HMR Series0805 ±5% 500 1/8W Series390MΩ 5K/REEL

SizeToleranceTCR (ppm /℃)PowerResistance (Ohm)Package

Environmental Characteristics

Test Method
Temperature Coefficient of
Resistance (T.C.R.)
As Spec.JIS-C-5201-1 4.8
IEC-60115-1 4.8
At 25°C/-55°C and 25°C/+125°C, 25°C is the reference temperature
Short Time Overload±(2.0%+0.05Ω)JIS-C-5201-1 4.13
IEC-60115-1 4.13
RCWV*2.5 or Max. Overload Voltage whichever is lower for 5 seconds
Insulation Resistance³10GJIS-C-5201-1 4.6
IEC-60115-1 4.6
Max. Overload Voltage for 1 minute
Endurance±(3.0%+0.10Ω)JIS-C-5201-1 4.25
IEC-60115-1 4.25.1
70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Damp Heat with Load±(3.0%+0.10Ω)JIS-C-5201-1 4.24
IEC-60115-1 4.24
40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Dry Heat±(1.5%+0.10Ω)JIS-C-5201-1 4.23
IEC-60115-1 4.23.2
at +125 °C for 1000 hrs
Bending Strength±(1.0%+0.05Ω)JIS-C-5201-1 4.33
IEC-60115-1 4.33
Bending once for 5 seconds
0805, 1206 sizes: 3mm
Solderability95% min. coverageJIS-C-5201-1 4.17
IEC-60115-1 4.17
245±5°C for 3 seconds
Resistance to Soldering Heat±(1.0%+0.05Ω)JIS-C-5201-1 4.18
IEC-60115-1 4.18
260±5°C for 10 seconds
Voltage ProofNo breakdown or flashoverJIS-C-5201-1 4.7
IEC-60115-1 4.7
1.42 times Max. Operating Voltage for 1 minute
LeachingIndividual leaching area ≦5%
Total leaching area ≦ 10%
JIS-C-5201-1 4.18
IEC-60068-2-58 8.2.1
260±5°C for 30 seconds
Rapid Change of Temperature±(1.0%+0.05Ω)JIS-C-5201-1 4.19
IEC-60115-1 4.19
-55°C to +125°C, 5 cycles

RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15~28°C; Humidity < 80%RH

Soldering Condition

IR Reflow Soldering
(1) Time of IR reflow soldering at maximum temperature point 260°C:10s
(2) Time of soldering iron at maximum temperature point 410°C:5s


5% for 0805/1206: 3 digits marking in E24
Example: 101=100Ω 102=1KΩ (1st and 2nd are E24 code and 3rd code is multiplier)

E24 code101112131516182022242730333639434751566268758291


Reel Specifications & Packaging Quantity

Packing Quantity & Reel Specifications
TypePackaging QuantityTape WidthReel DiameterΦA (mm)ΦB (mm)ΦC (mm)W (mm)T (mm)
Paper5K8mm7 inch178.5±1.560+1/-013.0±0.29.0±0.512.5±0.5
10K8mm10 inch254±1.0100±0.513.0±0.29.5±0.513.5±0.5
20K8mm13 inch330±1.0100±0.513.0±0.29.5±0.513.5±0.5

Paper Tape Specifications

Paper Tape Specifications
TypeA (mm)B (mm)W (mm)E (mm)F (mm)P0 (mm)P1 (mm)P2 (mm)ΦD0 (mm)T (mm)


  • 390M
Files Download


Condition search:      Cross Search

Best Sale

High Ohmic Chip Resistor (HMR Series HMR05JL7--390M) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime High Ohmic Chip Resistor (HMR Series HMR05JL7--390M) manufacturers since 1997. And their products are used throughout automotive, electronic device applications.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Viking has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 20 years of experience, Viking makes sure to meet each customer's demands.

Hot Products



Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More


Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More


Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More