SMD Power Inductor (PD Series PD3316MT6R8)

SMD Power Inductor (PD Series PD3316MT6R8) / Viking Tech has the experience in the design of innovative components, offering support and service to Global customers that demand a genuine manufacturing partner. Our goal is to be the leader in design, manufacturing, and marketing of miniature, precision passive components used throughout Automotive, Industrial and 3C electronic applications.

SMD Power Inductor (PD Series PD3316MT6R8)

PD3316MT6R8

SMD Power Inductor (PD Series PD3316MT6R8)
SMD Power Inductor (PD Series PD3316MT6R8) Files Download

SMD high power , high saturation inductor, Ideal inductors for DC-DC converteres in all 4C products.
PD Series3316 ±20% 6.8μH 0.027 Ω 4.6A

SizeToleranceInductanceTest ConditionDCR (Ω) max.IDC (A)
3316±20%6.8100KHz, 0.1V0.0274.6

Tape and Reel Specifications (Unit: mm)

Tape Reel Specifications - PD Series
TypeTape SizeParts Per Reel
WP13"
PD16081682000
PD330824121000
PD331624121000
PD33402416225
PD50223220250

SMT Power Inductor Environmental Specifications

General

ItemSpecification
Shelf Storage conditionsTemperature range: 15 ~ 28°C; Humidity: < 80% relative humidity.
Recommended product should be used within one year from the time of delivery.

Environmental Test

ItemSpecificationTest Conditions / Test Methods
High temperature Storage testNo case deformation or change in appearance.
Δ L/L ≤10%
Temperature 85 ± 2°C,
Time: 96 ± 2 hours,
Tested after 1hour at room temperature.
Low temperature Storage testTemperature -25 ± 2°C,
Time: 96 ± 2 hours,
Tested after 1hour at room temperature.
Humidity testTemperature 40 ± 2°C, 90 ~ 95% relative humidity
Time: 96 ± 2 hours
Tested after 1hour at room temperature.
Thermal shock testFirst -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles.
Tested after 1 hour at room temperature.

Mechanical Test

ItemSpecificationTest Conditions / Test Methods
Solderability testTerminal area must have 90% minimum solder coverage.Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds.
Resistance to Soldering HeatNo case deformation or change in appearance.Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds.
Vibration testNo case deformation or change in appearance.
Δ L/L ≤10%
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours.
Shock resistanceDrop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations.

Reflow

The Condition Of Reflow (Recommendation):

The Condition Of Reflow

Code

  • 6R8
Files Download


SEARCH

Condition search:      Cross Search

Menu

Best Sale

SMD Power Inductor (PD Series PD3316MT6R8) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime SMD Power Inductor (PD Series PD3316MT6R8) manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

SMD Power Inductor (PD Series PD3316MT6R8) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

SMD Power Inductor (PD Series PD3316MT6R8) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.


Main Product

AUTOMOTIVE APPLICATIONS

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
MEDICAL APPLICATIONS

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
COMMUNICATION APPLICATIONS

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More