Thin Film Chip Inductor (AL Series AL01BT1N4)

Thin Film Chip Inductor (AL Series AL01BT1N4)

AL01BT1N4

Thin Film Chip Inductor (AL Series AL01BT1N4)
Thin Film Chip Inductor (AL Series AL01BT1N4) Files Download

Thin film ceramic chip inductor, high frequency, RF inductor for high SRF, Excellent Q , superior temperarture tability. Photolithographic single layer ceramic chip. Stable inductance in hihg frequency circuit. High stable design for critical needs. small size to 01005/0201/0402
AL Series0201 ±0.1nH 1.4μH 0.45 Ω 250mA 8 / 500MHz 9GHz

SizeToleranceInductance (μH)DCR (Ω) max.IDC (mA)QSRF
0201±0.11.40.452508 / 500MHz9GHz

Environmental Characteristics

Item Requirement Test Method
Inductance As Spec. Measuring equipment and fixture:
0201: HP4287+Agilent 16196C
0402: HP4287+Agilent 16196B
Insulation Resistance >1000MΩ MIL-STD-202 Method 302
Apply 100VDC for 1minute
Damp Heat with Load Δ L ≤ 10% MIL-STD-202 Method 103B
40 ± 2°C, 90 ~ 95% R.H. Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”
Bending Strength As Spec. JIS-C-5201-1 4.33
Bending Amplitude 3mm for 10 seconds
Solderability 95% min. coverage MIL-STD-202 Method 208H
245 ± 5°C for 3 seconds
Resistance to Soldering Heat Δ L ≤ 10% MIL-STD-202 Method 210E
260 ± 5°C for 10 seconds
Dielectric Withstand Voltage >100V MIL-STD-202 Method 301
Apply 100VA (rms) for 1minute
High Temperature Exposure Δ L ≤ 10% JIS-C-5201-1 7.2
85 ± 2°C, 1000 +48/-0 hours
Low Temperature Storage Δ L ≤ 10% JIS-C-5201-1 7.1
-40 ± 3°C, 1000 +48/-0 hours
Temperature Cycle Δ L ≤ 10% JIS-C-5201-1 7.4
-40/RT/85/RT, 10 cycles

☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH

Reflow

Ceramic Thin Film Chip Inductor (AL) - Reflow

Packaging

Reel Specifications & Packaging Quantity (Unit : mm)

Type Ø A Ø B Ø C W T Quantity (EA) Reel Specifications & Packaging Quantity Specifications
AL01 178 ± 1.0 60.0+1.0 13.5 ± 0.70 9.5 ± 1.0 11.5 ± 1.0 10,000
AL02 178 ± 1.0 60.0+1.0 13.5 ± 0.70 9.5 ± 1.0 11.5 ± 1.0 10,000

Paper Tape Specifications

AL Series - Paper Tape Specifications
Type A B W E F P0 P1 P2 Ø D0 T
AL01 0.40 ± 0.05 0.70 ± 0.05 8.00 ± 0.10 1.75 ± 0.05 3.50 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 1.55 ± 0.03 0.42 ± 0.02
AL02 0.70 ± 0.05 1.16 ± 0.05 8.00 ± 0.10 1.75 ± 0.05 3.50 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 1.55 ± 0.05 0.43 ± 0.03

Remark: Test Method
Test direction: Bar mark faces left

Code

  • 1N4
Files Download


SEARCH

Condition search:      Cross Search

Best Sale

Thin Film Chip Inductor (AL Series AL01BT1N4) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime Thin Film Chip Inductor (AL Series AL01BT1N4) manufacturers since 1997. And their products are used throughout automotive, electronic device applications.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Viking has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 20 years of experience, Viking makes sure to meet each customer's demands.


Hot Products

Resistor

Resistor

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
Inductor

Inductor

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
Capacitor

Capacitor

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More