AUTOMOTIVE APPLICATIONS
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreFerrite Wire-wound Inductors (NL Series)
0402 / 0603 / 0805 / 1008 / 1210 / 1812 / 2220
Wire wound chip ferrite inductor, high current, molded and open type are available. small size down to 0603 , very strong solderability by flow soldering or soldering iron , wave soldering. Highly resistanct to mechanical shocks and pressure. Highly reliable in environments of sudden temp change and humidity. super Q characteristics.
Features
- Very strong solderability by flow soldering, soldering iron or wave soldering.
- Highly accurate dimensions, can be mounted automatically.
- Terminals are highly resistant to pull forces.
- Highly resistant to mechanical shocks and pressure.
- Highly reliable in environments of sudden temperature change and humidity Super Q characteristics.
- Moisture sensitivity level 1
Applications
- Micro Televisions, Liquid Crystal Televisions, Video Cameras, Portable VCRs, Car Radios, Car Stereos, Thin Tape Radios, Television Tuners, Mobile Telephones, Radio and Other Electronic Devices.
Construction
Color Coding
0603 / 0805 Type (except NL02 / NL08
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Part Numbering
Standard Electrical Specifications
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.05 | 2000 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R39 | 0.39 | ± 10, ± 20% | 12 | 7.9 | 400 | 0.40 | 500 |
| R47 | 0.47 | ± 10, ± 20% | 12 | 25 | 600 | 0.27 | 700 |
| R56 | 0.56 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R68 | 0.68 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R82 | 0.82 | ± 10, ± 20% | 12 | 7.9 | 230 | 0.62 | 700 |
| R90 | 0.90 | ± 10, ± 20% | 20 | 7.9 | 300 | 0.35 | 1400 |
| 1R0 | 1.0 | ± 10, ± 20% | 18 | 7.9 | 230 | 0.62 | 700 |
| 1R2 | 1.2 | ± 10, ± 20% | 18 | 7.9 | 210 | 0.68 | 650 |
| 1R5 | 1.5 | ± 10, ± 20% | 18 | 7.9 | 190 | 0.76 | 630 |
| 1R8 | 1.8 | ± 10, ± 20% | 18 | 7.9 | 170 | 0.84 | 600 |
| 2R0 | 2.0 | ± 10, ± 20% | 18 | 7.9 | 160 | 1.10 | 550 |
| 2R2 | 2.2 | ± 10, ± 20% | 18 | 7.9 | 150 | 1.10 | 520 |
| 2R7 | 2.7 | ± 10, ± 20% | 18 | 7.9 | 135 | 1.28 | 490 |
| 3R3 | 3.3 | ± 10, ± 20% | 18 | 7.9 | 120 | 1.46 | 450 |
| 3R9 | 3.9 | ± 10, ± 20% | 18 | 7.9 | 105 | 2.30 | 300 |
| 4R7 | 4.7 | ± 10, ± 20% | 18 | 7.9 | 90 | 2.00 | 400 |
| 5R6 | 5.6 | ± 10, ± 20% | 15 | 7.9 | 80 | 1.80 | 380 |
| 6R8 | 6.8 | ± 10, ± 20% | 15 | 7.9 | 70 | 2.00 | 360 |
| 8R2 | 8.2 | ± 10, ± 20% | 15 | 7.9 | 65 | 2.65 | 330 |
| 100 | 10 | ± 10, ± 20% | 12 | 2.5 | 60 | 2.95 | 300 |
| 150 | 15 | ± 10, ± 20% | 12 | 2.5 | 30 | 3.70 | 280 |
| 180 | 18 | ± 10, ± 20% | 12 | 2.5 | 26 | 4.00 | 160 |
| 220 | 22 | ± 10, ± 20% | 12 | 2.5 | 22 | 6.14 | 270 |
| 330 | 33 | ± 10, ± 20% | 10 | 2.5 | 12 | 7.00 | 200 |
| 390 | 39 | ± 10, ± 20% | 10 | 2.5 | 16 | 10.00 | 180 |
| 470 | 47 | ± 10, ± 20% | 10 | 2.5 | 10 | 10.70 | 160 |
| 560 | 56 | ± 10, ± 20% | 10 | 2.5 | 8 | 12.00 | 170 |
| 680 | 68 | ± 10, ± 20% | 10 | 2.5 | 6 | 13.50 | 145 |
| 820 | 82 | ± 10, ± 20% | 8 | 2.5 | 6 | 20.00 | 100 |
| 101 | 100 | ± 10, ± 20% | 8 | 1 | 4 | 21.00 | 80 |
Rating DC current: Inductance drop approximately 30% of L0 at Isat.
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Files Download
-
- RoHS Report
-
-
- REACH
| Image | Size | Tolerance | Inductance | Test Condition | DCR (Ω) max. | IDC (mA) | Q | SRF | Files Download | Action |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT2R7) 
|
1210 |
±10% |
2.7 |
7.96MHz |
1.1 |
290 |
30 |
65 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT3R3)
|
1210 |
±10% |
3.3 |
7.96MHz |
1.2 |
260 |
30 |
55 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT3R9)
|
1210 |
±10% |
3.9 |
7.96MHz |
1.3 |
250 |
30 |
50 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT4R7)
|
1210 |
±10% |
4.7 |
7.96MHz |
1.5 |
220 |
30 |
45 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT5R6)
|
1210 |
±10% |
5.6 |
7.96MHz |
1.6 |
200 |
30 |
40 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT6R8)
|
1210 |
±10% |
6.8 |
7.96MHz |
1.8 |
180 |
30 |
35 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT8R2)
|
1210 |
±10% |
8.2 |
7.96MHz |
2 |
170 |
30 |
30 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT100)
|
1210 |
±10% |
10 |
2.52MHz |
2.1 |
150 |
30 |
30 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT120)
|
1210 |
±10% |
12 |
2.52MHz |
2.5 |
140 |
30 |
28 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT150)
|
1210 |
±10% |
15 |
2.52MHz |
2.8 |
130 |
30 |
25 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT180)
|
1210 |
±10% |
18 |
2.52MHz |
3.3 |
120 |
30 |
22 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT220)
|
1210 |
±10% |
22 |
2.52MHz |
3.7 |
110 |
30 |
19 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT270)
|
1210 |
±10% |
27 |
2.52MHz |
5 |
80 |
30 |
18 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT330)
|
1210 |
±10% |
33 |
2.52MHz |
5.6 |
70 |
30 |
17 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT390)
|
1210 |
±10% |
39 |
2.52MHz |
6.4 |
65 |
30 |
15 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT470)
|
1210 |
±10% |
47 |
2.52MHz |
7 |
60 |
30 |
14 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT560)
|
1210 |
±10% |
56 |
2.52MHz |
8 |
55 |
30 |
13 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT680)
|
1210 |
±10% |
68 |
2.52MHz |
9 |
50 |
30 |
11 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT820)
|
1210 |
±10% |
82 |
2.52MHz |
10 |
45 |
30 |
10 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT101)
|
1210 |
±10% |
100 |
0.796MHz |
11 |
40 |
20 |
9 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT121)
|
1210 |
±10% |
120 |
0.796MHz |
11 |
70 |
20 |
8 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL10KT151)
|
1210 |
±10% |
150 |
0.796MHz |
15 |
65 |
20 |
7 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR18)
|
1812 |
±20% |
0.18 |
25.2MHz |
0.24 |
700 |
35 |
570 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR22)
|
1812 |
±20% |
0.22 |
25.2MHz |
0.25 |
665 |
40 |
505 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR27)
|
1812 |
±20% |
0.27 |
25.2MHz |
0.26 |
635 |
40 |
450 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR33)
|
1812 |
±20% |
0.33 |
25.2MHz |
0.28 |
605 |
40 |
425 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR39)
|
1812 |
±20% |
0.39 |
25.2MHz |
0.3 |
575 |
40 |
390 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR47)
|
1812 |
±20% |
0.47 |
25.2MHz |
0.32 |
545 |
40 |
350 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR56)
|
1812 |
±20% |
0.56 |
25.2MHz |
0.36 |
520 |
40 |
325 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR68)
|
1812 |
±20% |
0.68 |
25.2MHz |
0.4 |
500 |
40 |
300 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12MTR82)
|
1812 |
±20% |
0.82 |
25.2MHz |
0.45 |
475 |
40 |
275 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT1R0)
|
1812 |
±10% |
1 |
7.96MHz |
0.5 |
450 |
50 |
250 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT1R2)
|
1812 |
±10% |
1.2 |
7.96MHz |
0.55 |
430 |
50 |
240 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT1R5)
|
1812 |
±10% |
1.5 |
7.96MHz |
0.6 |
410 |
50 |
210 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT1R8)
|
1812 |
±10% |
1.8 |
7.96MHz |
0.65 |
390 |
50 |
190 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT2R2)
|
1812 |
±10% |
2.2 |
7.96MHz |
0.7 |
380 |
50 |
160 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT2R7)
|
1812 |
±10% |
2.7 |
7.96MHz |
0.75 |
370 |
50 |
150 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT3R3)
|
1812 |
±10% |
3.3 |
7.96MHz |
0.8 |
355 |
50 |
110 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT3R9)
|
1812 |
±10% |
3.9 |
7.96MHz |
0.9 |
330 |
50 |
100 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT4R7)
|
1812 |
±10% |
4.7 |
7.96MHz |
1 |
315 |
50 |
80 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT5R6)
|
1812 |
±10% |
5.6 |
7.96MHz |
1.1 |
300 |
50 |
50 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT6R8)
|
1812 |
±10% |
6.8 |
7.96MHz |
1.2 |
285 |
50 |
35 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT8R2)
|
1812 |
±10% |
8.2 |
7.96MHz |
1.4 |
270 |
50 |
28 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT100)
|
1812 |
±10% |
10 |
2.52MHz |
1.6 |
250 |
50 |
22 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT120)
|
1812 |
±10% |
12 |
2.52MHz |
2 |
225 |
50 |
20 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT150)
|
1812 |
±10% |
15 |
2.52MHz |
2.5 |
200 |
50 |
18 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT180)
|
1812 |
±10% |
18 |
2.52MHz |
2.8 |
190 |
50 |
16 |
|
Add to List |
Wire Wound Chip Inductor(Ferrite) (NL Series NL12KT220)
|
1812 |
±10% |
22 |
2.52MHz |
3.2 |
180 |
50 |
14 |
|
Add to List |
|---|
Application
MEDICAL APPLICATIONS
Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read More
COMMUNICATION APPLICATIONS
Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More